Cited by 1,357Adsorption and biosorption for pollutant removalEnvironmental remediation with nanomaterialsThermochemical Biomass Conversion Processes

The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.

Effects of pyrolysis temperature on soybean stover-and peanut shell-derived biochar properties and TCE adsorption in water

Abstract

Conversion of crop residues into biochars (BCs) via pyrolysis is beneficial to environment compared to their direct combustion in agricultural field. Biochars developed from soybean stover at 300 and 700 °C (S-BC300 and S-BC700, respectively) and peanut shells at 300 and 700 °C (P-BC300 and P-BC700, respectively) were used for the removal of trichloroethylene (TCE) from water. Batch adsorption experiments showed that the TCE adsorption was strongly dependent on the BCs properties. Linear relationships were obtained between sorption parameters (K(M) and S(M)) and molar elemental ratios as well as surface area of the BCs. The high adsorption capacity of BCs produced at 700 °C was attributed to their high aromaticity and low polarity. The efficacy of S-BC700 and P-BC700 for removing TCE from water was comparable to that of activated carbon (AC). Pyrolysis temperature influencing the BC properties was a critical factor to assess the removal efficiency of TCE from water.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.biortech.2012.05.042

Cites

37 of 37 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Flagged first, then by citations

Show all 37 references

Research works printed but not linked: 1

  1. McLaughlin, H., Anderson, P.S., Shields, F.E., Reed, T.B., 2009. All biochars are not created equal and how to tell them apart. Presented at: North Americal Biochars Conference, 9–12 August, Boulder, CO., USA.

Cited by

Sorted by citations

Items 801–900 of 1,002

Metadata

Authors
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S.
Affiliations
  • Kangwon National University (KR)
  • Beijing Forestry University (CN)
  • Jawaharlal Nehru University (IN)
  • National Academy of Agricultural Science (KR)
Corresponding author
Ok, Yong Sik
Venue
Bioresource Technology
Publisher
Elsevier BV
Published
2012-08
Volume
118
Pages
536-544
ISSN
0960-8524 (ISSN-L)
OpenAlex
W2031493035
Cited by
1,357
References
37
Citations by year
2026: 76 · 2025: 119 · 2024: 133 · 2023: 122 · 2022: 152 · 2021: 161 · 2020: 135 · 2019: 101 · 2018: 86 · 2017: 89 · 2016: 58 · 2015: 71 · 2014: 31 · 2013: 19 · 2012: 3
FWCI
35.96
Type
journal article
Language
en
Open access
closed
Locations
  • Bioresource Technology (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Ministry of Environment, Republic of Korea (173-092-010)
  • National Research Foundation of Korea (2009-0071439)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
Keywords
biochar, pyrolysis temperature, peanut shell, trichloroethylene, water treatment, adsorption isotherms, biochar surface area, aromaticity, activated carbon comparison
MeSH terms
Adsorption, Biodegradation, Environmental, Charcoal, Elements, Hydrogen-Ion Concentration, Kinetics, Arachis, Glycine max, Surface Properties, Temperature, Trichloroethylene, Waste Products, Water, Water Pollutants, Chemical, Water Purification

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review