Investigating the potential for a self-sustaining slow pyrolysis system under varying operating conditions
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
This work aimed to investigate the impact of highest treatment temperature (HTT), heating rate, carrier gas flow rate and feedstock on the composition and energy content of pyrolysis gas to assess whether a self-sustained system could be achieved through the combustion of the gas fraction alone, leaving other co-products available for alternative high-value uses. Calculations based on gas composition showed that the pyrolysis process could be sustained by the energy contained within the pyrolysis gases alone. The lower energy limit (6% biomass higher heating value (HHV)) was surpassed by pyrolysis at ⩾450°C while only a HTT of 650°C consistently met the upper energy limit (15% biomass HHV). These findings fill an important gap in literature related to the energy balance of the pyrolysis systems for biochar production, and show that, at least from an energy balance perspective; self-sustained slow pyrolysis for co-production of biochar and liquid products is feasible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 2×
“The composition of these components and the temperature regions over which they decompose ultimately determine the gas composition obtained during pyrolysis (Di Blasi et al., 1999; Mohan et al., 2006; Williams and Besler, 1996).”
BackgroundReview of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856 · cited 3×
“Extraction of high-value chemicals from pyrolysis liquids (bio-oil) and/or their upgrading to liquid biofuels is a promising route to efficient decarbonisation of transport and chemical industry (Bridgwater, 2012; Czernik and Bridgwater, 2004).”
BackgroundMethodSustainable biochar to mitigate global climate change
Woolf, D., Amonette, J. E., Street-Perrott, F. A., Lehmann, J., & Joseph, S. (2010) · Nature Communications · doi:10.1038/ncomms1053 · Cited by 2,680 · cited 2×
“Woolf et al. (2010) described how the C mitigation impact of biochar is about 25% larger, on average, than the impact obtained if the same biomass was fully combusted for energy.”
BackgroundInterpretation of the correlation coefficient: A basic review
Taylor, R. (1990) · Journal of Diagnostic Medical Sonography · doi:10.1177/875647939000600106 · Cited by 2,390 · cited 1×
“…were performed using Spearman rank method and R values were categorised by considering correlation coefficients 0.35 to represent low or weak correlations, 0.36–0.67 to be moderate correlations, 0.68–0.90 strong or high correlations and >0.9 to be a very high correlation (Taylor, 1990).”
MethodInfluentialThe Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623 · cited 4×
“Carrier gas flow rate While the effect of carrier gas flow rate on product distribution has been reported in literature (Antal and Grønli, 2003; Crombie and Mašek, in press; Demiral and Ayan, 2011; Demiral et al., 2012; Encinar et al., 2000), to the author’s knowledge, no studies have been performed on how this produc…”
BackgroundInfluentialThe effect of pyrolysis conditions on biochar stability as determined by three methods
Crombie, K., Mašek, O., Sohi, S. P., Brownsort, P., & Cross, A. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12030 · Cited by 533
Self-citationBio-oil production from pyrolysis of corncob (Zea mays L.)
Demiral, İ., Eryazıcı, A., & Şensöz, S. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.10.045 · Cited by 152
Cited by
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Uzoejinwa, B. B., He, X., Wang, S., El-Fatah Abomohra, A., Hu, Y., & Wang, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.004 · Cited by 637
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Production, activation, and applications of biochar in recent times
Sakhiya, A. K., Anand, A., & Kaushal, P. (2020) · Biochar · doi:10.1007/s42773-020-00047-1 · Cited by 497
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Metadata
- Authors
- Crombie, K., & Mašek, O.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2014-06
- Volume
- 162
- Pages
- 148-156
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2169739527
- Cited by
- 111
- References
- 8
- FWCI
- 3.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.