The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
A novel modification of lignin on corncob-based biochar to enhance removal of cadmium from water
Abstract
In order to improve the adsorption capacities of corncob-based biochars for heavy metal, the different pyrolysis temperature (350 °C, 450 °C and 550 °C) of corncob-based biochars were modified with the acrylonitrile, and adsorption capacities of Cadmium from solution by biochars were studied. The results showed that only at 350 °C the biochar can be successfully modified. The Cd adsorption capacity (85.65 mg/g) by the biosorbent was higher than other methods of modifying biochars previously reported. SEM-EDS and FTIR confirmed that the CN group was grafted on the biochar at low pyrolysis temperature. Batch adsorption experiment including pH-dependence, adsorption kinetics, and isotherms and XPS results showed that the removal mechanism of Cd(II) by the modified biochar was ion exchange and adsorption-complexation. This research not only obtained a novel method to modify biochar but also furthered research into the lignin of biochar composition, and provided an efficient sorbent for heavy metal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Mechanisms of metal sorption by biochars: Biochar characteristics and modifications
Li, H., Dong, X., da Silva, E. B., de Oliveira, L. M., Chen, Y., & Ma, L. Q. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.03.072 · Cited by 1,822
Rapid Dissolution of Cellulose in LiOH/Urea and NaOH/Urea Aqueous Solutions
Cai, J., & Zhang, L. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400222 · Cited by 1,047
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Xiao, X., Chen, B., & Zhu, L. (2014) · Environmental Science & Technology · doi:10.1021/es405676h · Cited by 567
Li, B., Yang, L., Wang, C.-Q., Zhang, Q.-P., Liu, Q.-C., Li, Y.-D., & Xiao, R. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.02.061 · Cited by 545
Self-citationCharacteristics and applications of biochar for environmental remediation: a review
Xie, T., Reddy, K. R., Wang, C., Yargicoglu, E., & Spokas, K. (2015) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2014.924180 · Cited by 527
Liang, J., Li, X., Yu, Z., Zeng, G., Luo, Y., Jiang, L., Yang, Z., Qian, Y., & Wu, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00434 · Cited by 517
Ding, Z., Hu, X., Wan, Y., Wang, S., & Gao, B. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.10.007 · Cited by 465
Kuppusamy, S., Thavamani, P., Megharaj, M., Venkateswarlu, K., & Naidu, R. (2016) · Environment International · doi:10.1016/j.envint.2015.10.018 · Cited by 383
Saltalı, K., Sarı, A., & Aydın, M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.124 · Cited by 369
Lead and cadmium sorption mechanisms on magnetically modified biochars
Trakal, L., Veselská, V., Šafařík, I., Vítková, M., Číhalová, S., & Komárek, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.12.056 · Cited by 360
Sorption performance and mechanisms of arsenic(V) removal by magnetic gelatin-modified biochar
Zhou, Z., Liu, Y.-G., Liu, S.-B., Liu, H.-Y., Zeng, G.-M., Tan, X.-F., Yang, C.-P., Ding, Y., Yan, Z.-L., & Cai, X.-X. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.113 · Cited by 342
Effects of Mineral Additives on Biochar Formation: Carbon Retention, Stability, and Properties
Li, F., Cao, X., Zhao, L., Wang, J., & Ding, Z. (2014) · Environmental Science & Technology · doi:10.1021/es501885n · Cited by 311
Keiluweit, M., Kleber, M., Sparrow, M. A., Simoneit, B. R. T., & Prahl, F. G. (2012) · Environmental Science & Technology · doi:10.1021/es302125k · Cited by 296
Kim, J. R., & Kan, E. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.05.016 · Cited by 286
Zhang, X., Zhang, S., Yang, H., Feng, Y., Chen, Y., Wang, X., & Chen, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.024 · Cited by 285
The influence of biochar type on long-term stabilization for Cd and Cu in contaminated paddy soils
Li, H., Ye, X., Geng, Z., Zhou, H., Guo, X., Zhang, Y., Zhao, H., & Wang, G. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.10.048 · Cited by 248
Liu, X., Zhang, Y., Li, Z., Feng, R., & Zhang, Y. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.07.077 · Cited by 213
Su, Y., Adeleye, A. S., Huang, Y., Sun, X., Dai, C., Zhou, X., Zhang, Y., & Keller, A. A. (2014) · Water Research · doi:10.1016/j.watres.2014.06.008 · Cited by 197
Mineral–Biochar Composites: Molecular Structure and Porosity
Rawal, A., Joseph, S. D., Hook, J. M., Chia, C. H., Munroe, P. R., Donne, S., Lin, Y., Phelan, D., Mitchell, D. R. G., Pace, B., et al. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00685 · Cited by 193
Park, C. M., Han, J., Chu, K. H., Al-Hamadani, Y. A. J., Her, N., Heo, J., & Yoon, Y. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.12.038 · Cited by 189
Lee, J. W., Hawkins, B., Day, D. M., & Reicosky, D. C. (2010) · Energy & Environmental Science · doi:10.1039/c004561f · Cited by 166
Tharaneedhar, V., Kumar, P. S., Saravanan, A., Ravikumar, C., & Jaikumar, V. (2016) · Sustainable materials and technologies · doi:10.1016/j.susmat.2016.11.001 · Cited by 160
Kołtowski, M., Hilber, I., Bucheli, T. D., Charmas, B., Skubiszewska-Zięba, J., & Oleszczuk, P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.065 · Cited by 145
Brennan, A., Moreno‐Jiménez, E., Puschenreiter, M., Alburquerque, J. A., & Switzer, C. (2014) · Plant and Soil · doi:10.1007/s11104-014-2074-0 · Cited by 134
Low-cost magnetic herbal biochar: characterization and application for antibiotic removal
Kong, X., Liu, Y., Pi, J., Li, W., Liao, Q., & Shang, J. (2017) · Environmental Science and Pollution Research · doi:10.1007/s11356-017-8376-z · Cited by 111
Zuo, W.-Q., Chen, C., Cui, H., & Fu, M. (2017) · RSC Advances · doi:10.1039/c7ra00324b · Cited by 110
Li, H., Qiu, Y.-F., Wang, X., Yang, J. W., Yu, Y., Chen, Y., & Liu, Y. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.11.117 · Cited by 108
Wu, J., Yi, Y., Li, Y., Fang, Z., & Tsang, P. E. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.08.049 · Cited by 102
Response of plant and soil microbes to biochar amendment of an arsenic-contaminated soil
Gregory, S. J., Anderson, C. W. N., Arbestain, M. C., & McManus, M. T. (2014) · Agriculture Ecosystems & Environment · doi:10.1016/j.agee.2014.03.035 · Cited by 101
Chemical and ecotoxicological evaluation of biochar produced from residues of biogas production
Kończak, M., Oleszczuk, P., & Bartmiński, P. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.013 · Cited by 99
Sekulić, M. T., Pap, S., Stojanović, Z. S., Bošković, N., Radonić, J. R., & Knudsen, T. Š. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.09.082 · Cited by 97
Xu, X., Hu, X., Ding, Z., Chen, Y., & Gao, B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.122 · Cited by 91
Lin, H., Han, S., Dong, Y., & He, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.061 · Cited by 88
Self-citationNi, N., Song, Y., Shi, R., Liu, Z., Bian, Y., Wang, F., Yang, X., Gu, C., & Jiang, X. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.05.256 · Cited by 85
Seesuriyachan, P., Kawee‐ai, A., & Chaiyaso, T. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.193 · Cited by 58
El‐Khouly, A. S., Kenawy, E., Safaan, A. A., Takahashi, Y., Hafiz, Y. A., Sonomoto, K., & Zendo, T. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.047 · Cited by 36
Yan, Y., Li, H., Ren, J., Lin, Q., Peng, F., Sun, R., & Chen, K. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.024 · Cited by 33
Chaukura, N., Gwenzi, W., Mupatsi, N. M., Ruziwa, D. T., & Chimuka, C. (2016) · Water Air & Soil Pollution · doi:10.1007/s11270-016-3191-6 · Cited by 14
Cited by
Vardhan, K. H., Kumar, P. S., & Panda, R. C. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111197 · Cited by 1,618
Karić, N., Maia, A. S., Teodorović, A., Atanasova, N., Langergraber, G., Crini, G., Ribeiro, A. R. L., & Đolić, M. (2022) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2021.100239 · Cited by 466
Zhang, X., Zhang, P., Yuan, X., Li, Y., & Han, L. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122318 · Cited by 445
Cao, L., Yu, I. K. M., Liu, Y., Ruan, X., Tsang, D. C. W., Hunt, A. J., Ok, Y. S., Song, H., & Zhang, S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.08.065 · Cited by 410
Hu, Y., Chen, D., Zhang, R., Ding, Y., Ren, Z., Fu, M., Cao, X., & Zeng, G. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126495 · Cited by 408
Metadata
- Authors
- Luo, M., Lin, H., Li, B., Dong, Y., He, Y., & Wang, L.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 259
- Pages
- 312-318
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2793557471
- Cited by
- 265
- References
- 40
- FWCI
- 11.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.