The transformation of nitrogen during pressurized entrained-flow pyrolysis of Chlorella vulgaris
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The transformation of nitrogen in microalgae during entrained-flow pyrolysis of Chlorella vulgaris was systematically investigated at the temperatures of 600-900 °C and pressures of 0.1-4.0 MPa. It was found that pressure had a profound impact on the transformation of nitrogen during pyrolysis. The nitrogen retention in bio-char and its content in bio-oil reached a maximum value at 1.0 MPa. The highest conversion of nitrogen (50.25 wt%) into bio-oil was achieved at 1.0 MPa and 800 °C, which was about 7 wt% higher than that at atmospheric pressure. Higher pressures promoted the formation of pyrrolic-N (N-5) and quaternary-N (N-Q) compounds in bio-oil at the expense of nitrile-N and pyridinic-N (N-6) compounds. The X-Ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) results on bio-chars clearly evidenced the transformation of N-5 structures into N-6 and N-Q structures at elevated pressures. The nitrogen transformation pathways during pyrolysis of microalgae were proposed and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Williams, P. J. L. B., & Laurens, L. M. L. (2010) · Energy & Environmental Science · doi:10.1039/b924978h · Cited by 1,223
Girods, P., Dufour, A., Rogaume, Y., Rogaume, C., & Zoulalian, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.003 · Cited by 76
Sequential Hydrothermal Liquefaction characterization and nutrient recovery assessment
Martinez-Fernandez, J. S., & Chen, S. (2017) · Algal Research · doi:10.1016/j.algal.2017.05.022 · Cited by 48
Cited by
Li, Y., Xing, B., Ding, Y., Han, X., & Wang, S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123614 · Cited by 576
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Pyrolysis of microalgae: A critical review
Yang, C., Li, R., Zhang, B., Qiu, Q., Wang, B., Yang, H., Ding, Y., & Wang, C. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.012 · Cited by 345
A review on pyrolysis of protein-rich biomass: Nitrogen transformation
Leng, L., Yang, L., Chen, J., Leng, S., Li, H., Li, H., Yuan, X., Zhou, W., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123801 · Cited by 259
Maliutina, K. M., Omoriyekomwan, J. E., He, C., Fan, L., & Folli, A. (2023) · Frontiers in Environmental Engineering · doi:10.3389/fenve.2023.1228992 · Cited by 35
Self-citation
Metadata
- Authors
- Maliutina, K., Tahmasebi, A., & Yu, J.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 262
- Pages
- 90-97
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2799292531
- Cited by
- 60
- References
- 4
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.