Effect of operating conditions on hydrothermal liquefaction of Spirulina over Ni/TiO2 catalyst
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
In this study, the effects of reaction temperature, holding time, algae/water ratio and catalyst dosage on the yield and quality of bio-oil produced via the HTL of Spirulina were investigated. The maximum bio-oil yield (43.05 wt%) and energy recovery (ER) value (64.62%) were obtained at 260 °C for 30 min, with an algae/water ratio of 1/4 and a catalyst dosage of 5 wt%. The bio-oil samples were characterized by elemental analysis, Gas Chromatography-Mass Spectrometry (GC-MS), Fourier Transform Infrared (FI-IR), and Thermo-gravimetric analysis (TGA). Results indicated that higher heating values (HHVs) of bio-oils were in the range of 27.28-36.01 MJ/kg, and main compounds of bio-oil were amides, esters, nitriles, hydroperoxide and alkanes. Adding of the Ni/TiO2 catalyst can decrease the contents of oxygenated and nitrogenous compounds and promote the formation of desirable components such as esters and alkanes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
A review on hydrothermal liquefaction of biomass
Gollakota, A. R. K., Kishore, N., & Gu, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.178 · Cited by 1,306
Overview of recent advances in thermo-chemical conversion of biomass
Zhang, L., Xu, C. (., & Champagne, P. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.11.038 · Cited by 1,217
Hydrothermal liquefaction of a microalga with heterogeneous catalysts
Duan, P., & Savage, P. E. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100758s · Cited by 608
Shuping, Z., Yulong, W., Mingde, Y., Kaleem, I., Chun, L., & Tong, J. (2010) · Energy · doi:10.1016/j.energy.2010.07.013 · Cited by 461
Toor, S. S., Reddy, H., Deng, S., Hoffmann, J., Spangsmark, D., Madsen, L. B., Holm-Nielsen, J. B., & Rosendahl, L. A. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.12.144 · Cited by 236
Hydrothermal Reactions of Biomolecules Relevant for Microalgae Liquefaction
Changi, S. M., Faeth, J. L., Mo, N., & Savage, P. E. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02771 · Cited by 175
Cited by
Brindhadevi, K., Anto, S., Rene, E. R., Sekar, M., Mathimani, T., Thuy Lan Chi, N., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119106 · Cited by 194
Effect of low-temperature catalytic hydrothermal liquefaction of Spirulina platensis
Kandasamy, S., Zhang, B., He, Z., Chen, H., Feng, H., Wang, Q., Wang, B., Ashokkumar, V., Siva, S., Bhuvanendran, N., et al. (2020) · Energy · doi:10.1016/j.energy.2019.116236 · Cited by 85
Zhou, Y., & Hu, C. (2020) · Catalysts · doi:10.3390/catal10020145 · Cited by 57
Metadata
- Authors
- Tian, W., Liu, R., Wang, W., Yin, Z., & Yi, X.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 263
- Pages
- 569-575
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2799383510
- Cited by
- 74
- References
- 7
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.