Influence of NH3 concentration on biomass nitrogen-enriched pyrolysis
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this study, nitrogen was used to replace oxygen through biomass N-enriched pyrolysis in a fixed-bed reactor to obtain N-containing chemicals and N-doped biochar. Influence of NH3 concentration on the formation mechanism of N-species and electrochemical performance of N-doped biochar was investigated in depth. Results showed that increasing NH3 concentration promoted bio-oil and gas generation, and increased H2, CH4 and CO yield at the diminishing of CO2. Simultaneously, bio-oil showed lower oxygen content with non-methoxy phenols and N-heterocyclics as the main components, and the maximums were 57.73% and 16.21% at 80 vol% NH3 concentration, respectively. With regard to solid N-doped biochar, nitrogen content (4.85 wt%), N-containing groups and specific surface area (369.59 m2/g) increased greatly, and excellent electrochemical property (120 F/g) was shown with NH3 concentration increasing. However, NH3 conversion efficiency decreased gradually with NH3 increasing, and 40 vol% may be the optimum NH3 concentration for biomass N-enriched pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Patel, M., & Kumar, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.146 · Cited by 284
Correlation of Feedstock and Bio-oil Compound Distribution
Li, J., Chen, Y., Yang, H., Zhu, D., Chen, X., Wang, X., & Chen, H. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00545 · Cited by 63
Self-citation
Cited by
An overview on engineering the surface area and porosity of biochar
Leng, L., Xiong, Q., Yang, L., Li, H., Zhou, Y., Zhang, W., Jiang, S., Li, H., & Huang, H. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144204 · Cited by 1,314
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Wang, L., Ok, Y. S., Tsang, D. C. W., Alessi, D. S., Rinklebe, J., Wang, H., Mašek, O., Hou, R., O'Connor, D., & Hou, D. (2020) · Soil Use and Management · doi:10.1111/sum.12592 · Cited by 393
Yang, H., Chen, Z., Chen, W., Chen, Y., Wang, X., & Chen, H. (2020) · Energy · doi:10.1016/j.energy.2020.118646 · Cited by 130
Self-citationCai, N., Xia, S., Zhang, X., Meng, Z., Bartocci, P., Fantozzi, F., Chen, Y., Chen, H., Williams, P. T., & Yang, H. (2020) · ChemSusChem · doi:10.1002/cssc.201903293 · Cited by 90
Self-citationXu, L., He, Z., Zhang, H., Wu, S., Dong, C., & Fang, Z. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124252 · Cited by 35
Metadata
- Authors
- Chen, W., Li, K., Xia, M., Chen, Y., Yang, H., Chen, Z., Chen, X., & Chen, H.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 263
- Pages
- 350-357
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2800847131
- Cited by
- 110
- References
- 4
- FWCI
- 3.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.