The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Bioconversion of plant biomass hydrolysate into bioplastic (polyhydroxyalkanoates) using Ralstonia eutropha 5119
Abstract
Pretreatment of lignocellulosic biomass results in the formation of byproducts (furfural, hydroxymethylfurfural [HMF], vanillin, acetate etc.), which affect microbial growth and productivity. Furfural (0.02%), HMF (0.04%), and acetate (0.6%) showed positive effects on Ralstonia eutropha 5119 growth and polyhydroxyalkanoate (PHA) production, while vanillin exhibited negative effects. Response optimization and interaction studies between the variables glucose, ammonium chloride, furfural, HMF, and acetate using the response surface methodology resulted in maximum PHA production (2.1 g/L) at optimal variable values of 15.3 g/L, 0.43 g/L, 0.04 g/L, 0.05 g/L, and 2.34 g/L, respectively. Different lignocellulosic biomass hydrolysates (LBHs), including barley biomass hydrolysate (BBH), Miscanthus biomass hydrolysate (MBH), and pine biomass hydrolysate (PBH), were evaluated as potential carbon sources for R. eutropha 5119 and resulted in 1.8, 2.0, and 1.7 g/L PHA production, respectively. MBH proved the best carbon source, resulted in higher biomass (Yx/s, 0.31 g/g) and PHA (Yp/s, 0.14 g/g) yield.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bhatia, S. K., Bhatia, R. K., & Yang, Y.-H. (2016) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-016-9415-9 · Cited by 70
Self-citation
Cited by
Microbial and Enzymatic Degradation of Synthetic Plastics
Mohanan, N., Montazer, Z., Sharma, P. K., & Levin, D. B. (2020) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.580709 · Cited by 1,122
Bhatia, S. K., Jagtap, S. S., Bedekar, A. A., Bhatia, R. K., Patel, A. K., Pant, D., Rajesh Banu, J., Rao, C. V., Kim, Y.-G., & Yang, Y.-H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122724 · Cited by 780
Self-citationIonic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion
Usmani, Z., Sharma, M., Gupta, P., Karpichev, Y., Gathergood, N., Bhat, R., & Gupta, V. K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123003 · Cited by 404
Bioplastic from Renewable Biomass: A Facile Solution for a Greener Environment
Coppola, G., Gaudio, M. T., Lopresto, C. G., Calabro, V., Curcio, S., & Chakraborty, S. (2021) · Earth Systems and Environment · doi:10.1007/s41748-021-00208-7 · Cited by 362
Patel, A., & Shah, A. R. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.02.001 · Cited by 299
In vivo and Post-synthesis Strategies to Enhance the Properties of PHB-Based Materials: A Review
Turco, R., Santagata, G., Corrado, I., Pezzella, C., & Di Serio, M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.619266 · Cited by 169
Metadata
- Authors
- Bhatia, S. K., Gurav, R., Choi, T.-R., Jung, H.-R., Yang, S.-Y., Moon, Y.-M., Song, H.-S., Jeon, J.-M., Choi, K.-Y., & Yang, Y.-H.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 271
- Pages
- 306-315
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2894010175
- Cited by
- 216
- References
- 1
- FWCI
- 6.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.