Enhancing the production of light olefins and aromatics from catalytic fast pyrolysis of cellulose in a dual-catalyst fixed bed reactor
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this study, the effects of a macroporous catalyst (CaO), mesoporous catalyst (MCM-41), and microporous catalysts (ZSM-5 and SAPO-34) on the production of light olefins and aromatics from cellulose catalytic fast pyrolysis were investigated in a dual-catalyst fixed bed reactor. Further the fractional catalytic pyrolysis of MCM-41 or CaO with ZSM-5 or SAPO-34 was explored. The results showed that ZSM-5 was the most efficient catalyst for the formation of light olefins and aromatics followed by MCM-41, CaO and SAPO-34, and no aromatics were found with SAPO-34 only. Moreover, 15% CaO combined 85% ZSM-5 produced the highest yield of light olefins (5.59%) and aromatic (13.42%). The addition of CaO and MCM-41 promoted the selectivity of C2H4 and decreased the production of naphthalene.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Zhang, H., Xiao, R., Wang, D., Zhong, Z., Song, M., Pan, Q., & He, G. (2009) · Energy & Fuels · doi:10.1021/ef900720m · Cited by 149
Cited by
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Wang, S., Li, Z., Yi, W., Fu, P., Zhang, A., & Bai, X. (2021) · Renewable Energy · doi:10.1016/j.renene.2020.10.108 · Cited by 95
Self-citationZhong, S., Zhang, B., Liu, C., Shujaa aldeen, A., Mwenya, S., & Zhang, H. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105544 · Cited by 86
Metadata
- Authors
- Yang, M., Shao, J., Yang, H., Zeng, K., Wu, Z., Chen, Y., Bai, X., & Chen, H.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 273
- Pages
- 77-85
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2898725194
- Cited by
- 72
- References
- 3
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.