Hydrothermal carbonization of Chinese fan palm
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This study provided a detailed observation on hydrothermal carbonization (HTC) of Chinese fan palm. The heating value and chemical exergy was calculated. As the reaction severity increased, both heating value (18.84-27.61 MJ/kg) and chemical exergy (21.07-29.06 MJ/kg) had increase trend. The effect of temperature on HTC process was more significant than residence time. Due to the dehydration and decarboxylation, the O/C and H/C atomic ratios decreased gradually. However, the N/C ratio was not linear change. When the temperature was 240 °C, and reaction time was above 60 min, the fuel properties of hydrochar were close to lignite. The water uptake rate (7.22-3.59%) also had very decreased trend. The SEM and XRD analysis showed the surface morphology of hydrochar treated at 240 °C much differed from that of raw sample, the structure is partially destructed. Combustion characteristics of CFP and hydrochar was detected, the 180-60 had optimal combustion characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Production and optimization of bamboo hydrochars for adsorption of Congo red and 2-naphthol
Li, Y., Meas, A., Shan, S., Yang, R., & Gai, X. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.012 · Cited by 195
Utilization of recovered nitrogen from hydrothermal carbonization process by Arthrospira platensis
Yao, C., Pan, Y., Lu, H., Wu, P., Meng, Y., Cao, X., & Xue, S. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.03.166 · Cited by 49
Cited by
A review on hydrothermal carbonization of biomass and plastic wastes to energy products
Shen, Y. (2020) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105479 · Cited by 427
Hydrochar: A Review on Its Production Technologies and Applications
Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K. (2021) · Catalysts · doi:10.3390/catal11080939 · Cited by 363
A comprehensive review on hydrothermal carbonization of biomass and its applications
Sharma, R., Jasrotia, K., Singh, N., Ghosh, P., srivastava, S., Sharma, N. R., Singh, J., Kanwar, R., & Kumar, A. (2020) · Chemistry Africa · doi:10.1007/s42250-019-00098-3 · Cited by 252
Zubbri, N. A., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105074 · Cited by 106
Metadata
- Authors
- Yao, Z., & Ma, X.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 282
- Pages
- 28-36
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2919945125
- Cited by
- 63
- References
- 5
- FWCI
- 3.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrothermal carbonization of Chinese fan palm. https://app.cochat.ai/papers/10.1016/j.biortech.2019.02.130
- The paper
- Yao, Z., & Ma, X. (2019). Hydrothermal carbonization of Chinese fan palm. Bioresource Technology. https://doi.org/10.1016/j.biortech.2019.02.130
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.