The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index; 15 of the 95 sources its claims cite were checked for support.
Hydrochar: A Review on Its Production Technologies and Applications
Open accessAbstract
Recently, due to the escalating usage of non-renewable fossil fuels such as coal, natural gas and petroleum coke in electricity and power generation, and associated issues with pollution and global warming, more attention is being paid to finding alternative renewable fuel sources. Thermochemical and hydrothermal conversion processes have been used to produce biochar and hydrochar, respectively, from waste renewable biomass. Char produced from the thermochemical and hydrothermal decomposition of biomass is considered an environmentally friendly replacement for solid hydrocarbon materials such as coal and petroleum coke. Unlike thermochemically derived biochar, hydrochar has received little attention due to the lack of literature on its production technologies, physicochemical characterization, and applications. This review paper aims to fulfill these objectives and fill the knowledge gaps in the literature relating to hydrochar. Therefore, this review discusses the most recent studies on hydrochar characteristics, reaction mechanisms for char production technology such as hydrothermal carbonization, as well as hydrochar activation and functionalization. In addition, the applications of hydrochar, mainly in the fields of agriculture, pollutant adsorption, catalyst support, bioenergy, carbon sequestration, and electrochemistry are reviewed. With advancements in hydrothermal technologies and other environmentally friendly conversion technologies, hydrochar appears to be an appealing bioresource for a wide variety of energy, environmental, industrial, and commercial applications.
Overview
CoChat Summary
TL;DR
This review synthesizes hydrochar production via hydrothermal carbonization, liquefaction, and gasification, compares hydrochar with biochar, and surveys activation/functionalization and applications. It reports that hydrochar generally has lower surface area and porosity but higher H/C and O/C ratios than biochar, while activation can greatly increase surface area and enable uses in adsorption, catalysis, energy, carbon sequestration, and electrochemistry.
Key findings
- Hydrochar and biochar differ in properties: hydrochar is generally non-porous with low specific surface area, spherical morphology, 58–64 wt.% total carbon, H/C >2.3, O/C >1.7, and mostly acidic pH; biochar is porous with higher surface area (>400 m²/g), graphite-like layers, 60–80 wt.% total carbon, H/C >1.5, O/C >0.7, and mostly alkaline pH.
- Hydrothermal carbonization is typically performed at 180–240 °C for 5–240 min under subcritical water pressures, whereas pyrolysis is performed at 300–650 °C; HTC is considered the main hydrochar production process, with higher hydrochar yield than hydrothermal liquefaction or gasification, and increasing temperature/time decreases yield while increasing carbon content and decreasing oxygen content.
- Activation can improve hydrochar properties: chemical activation with K₂CO₃ or KOH at 675 °C, impregnation ratio 1.5, and N₂ flow 267 cm³/min produced activated carbon with surface area ≥2100 m²/g from algal hydrochar, compared with 4 m²/g for the hydrochar; physical activation examples reached up to 313 m²/g with air activation of almond-shell hydrochar and up to 390 m²/g with steam activation of sugarcane-bagasse hydrochar.
- Applications reported include pollutant adsorption (e.g., coffee-husk hydrochar adsorbed methylene blue at 34.9 mg/g at 210 °C for 4 h; bamboo hydrochar adsorbed Congo red at 97 mg/g; KOH-activated switchgrass hydrochar showed 100% adsorption of copper and cadmium in 24 h), energy production (sludge HTC char at 200 °C for 4 h had energy densification 1.24, heating value 15.25 MJ/kg, and energy recovery efficiency 69.8%), and electrochemistry (e.g., activated hydrochar on ZnO and activated hydrochar had surface areas of 819 and 1073 m²/g, with 117.4 F/g specific capacitance at 0.5 A/g stable for 1000 cycles).
Methods
- This is a review article, not a primary experimental study; it synthesizes recent literature on hydrochar characteristics, reaction mechanisms, production technologies (hydrothermal carbonization, liquefaction, and gasification), activation/functionalization, and applications.
- The review includes comparative tables summarizing physicochemical properties of hydrochar versus biochar and tabulating feedstocks and reaction conditions for hydrochar production through HTC and HTL.
- Main analysis is narrative synthesis and comparative discussion of reported studies, with no systematic search protocol or quantitative meta-analysis described in the provided text.
Limitations
- The paper states that hydrochar has received little attention due to a lack of literature on its production technologies, physicochemical characterization, and applications, and that in-depth research is needed on ecotoxicological properties and soil impacts for agricultural use and on carbon sequestration applicability and stability.
- The paper notes that in catalyst applications, recovering ionic liquid for reuse from hydrochar-based sulfonated catalysts was challenging.
- Evident from the text: as a narrative review, it does not describe a systematic literature search, inclusion/exclusion criteria, or quantitative meta-analysis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 Schematic representation of the formation of hydrochar, its adsorption mechanism, and enhancement method. Reproduced with permission from Fernandez-Sanroman et al. (2021) [98]. Copyright 2021 Elsevier. Figure 3. Schematic representation of the formation of hydrochar, its adsorption mechanism, and enhancement method. Reproduced with permission from Fernandez-Sanroman et al. (2021) [98]. Copyright 2021 Elsevier.](https://figures.cochat.ai/paper-figures/13ffd5a2599a4634a9b7b93071fd167d/hydrochar-a-review-on-its-production-technologies-and-applications-figure-3.png)
Verification
Claims the paper makes
10 Valid · 6 Not valid · 56 Not checked · 18 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Reaction conditions can affect significantly the yield and characteristics of hydrochar and biochar [20,21].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 2. Hydrochar versus Biochar
What the sources say
- Not checked — no full text of the sourcecites [20] Kambo, 2015, A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications, Renew. Sustain. Energy Rev. source
- Supportedcites [21] Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A.G., Ojeda, G., Bachmann, J., and Behrendt, F. (2018). Towards biochar and hydrochar engineering—Influence of process conditions on surface physical and chemical properties, thermal stability, nutrient availability, toxicity and wettability. Energies, 11. source
Section 3.1 reports that conversion temperature and gas flow rate affect biochar yield, while conversion temperature, retention time, and washing affect hydrochar yield. The Introduction and Conclusions describe effects of process conditions on char properties. Page numbers were not supplied in the passages. (LLM, conf=0.94)
states a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Bio/hydrochar has received much attention as its feedstocks are abundantly available, renewable and inexpensive [7,15].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Partly supportedcites [7] Cheng, F., and Li, X. (2018). Preparation and application of biochar-based catalysts for biofuel production. Catalysts, 8. sourceExperimental — accuracy not yet measured
The Introduction describes biochar’s feedstock as renewable and links that advantage to its potential applications. The Conclusions say biochar production is cheap, partly because of its renewable feedstock. Neither passage says the feedstocks themselves are inexpensive or abundantly available, so those parts of the claim are not established by this source. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [15] Hu, 2010, Engineering carbon materials from the hydrothermal carbonization process of biomass, Adv. Mater. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Moreover, HTC is mostly considered economically viable for wet biomass [7,8].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Partly supportedcites [7] Cheng, F., and Li, X. (2018). Preparation and application of biochar-based catalysts for biofuel production. Catalysts, 8. sourceExperimental — accuracy not yet measured
Section 2.2.1 (page unavailable) says HTC does not require drying and is very suitable for high-moisture feedstocks, unlike pyrolysis, which usually requires energy-intensive drying. That supports the wet-biomass aspect, but the paper does not establish that HTC is economically viable or say it is mostly considered so. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [8] Hoekman, 2013, Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks, Biomass Convers. Biorefinery source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Compared to slow pyrolysis, the hydrothermal carbonization process is considered a promising technology due to the elimination of the drying step.”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Supportedcites [7] Cheng, F., and Li, X. (2018). Preparation and application of biochar-based catalysts for biofuel production. Catalysts, 8. source
Section 2.2.1 says HTC does not require drying biomass feedstock, whereas conventional pyrolysis usually requires energy-intensive drying. Section 2.1.1 identifies slow pyrolysis as a pyrolysis process, so the comparison is supported. (LLM, conf=0.91)
- Not checked — no full text of the sourcecites [8] Hoekman, 2013, Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks, Biomass Convers. Biorefinery source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Alkaline solutions have been widely considered as chemical agents to chemically activate the produced hydrochar to remove the volatile matters resulting in the increasing of the presence of hydrophilic functional groups, such as hydroxyl and carboxylic groups.”
§ Hydrochar: A Review on Its Production Technologies and Applications > 4. Activation and Functionalization of Hydrochar
What the sources say
- Not checked — no full text of the sourcecites [65] Tan, 2017, Biochar as potential sustainable precursors for activated carbon production: Multiple applications in environmental protection and energy storage, Bioresour. Technol. source
- Partly supportedcites [68] Azzaz, 2020, Hydrochars production, characterization and application for wastewater treatment: A review, Renew. Sustain. Energy Rev. sourceExperimental — accuracy not yet measured
Section 3.2.2 (page not provided) says alkaline activation is widely applied and increases hydrophilic surface groups, including hydroxyl and carboxylic groups. It does not support the stated purpose of removing volatile matter; instead, it says the treatment reduces volatile matter losses. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 90 claims and every source verdict.
- It may state two separate claims as one. 44
- Probably not a substantial claim. 9
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| H/C molar ratio | >2.3 | >1.5 |”
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| Chinese fan palm | 180 240 210 | 1 1 1 | 61 50 57 | 55.9 64.1 58.1 | 1.64 1.5 1.6 | 24.2 28.1 25.3 | [52] |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 5.6. Electrochemical Devices
“Li and Liu (2014) prepared a walnut shell-derived hydrochar, activated hydrochar, and prepared activated hydrochar on ZnO composites for the making of supercapacitors [41].”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“41. Zhang, Z.; Zhu, Z.; Shen, B.; Liu, L. Insights into biochar and hydrochar production and applications: A review. Energy 2019, 171, 581-598. [CrossRef]”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 5.6. Electrochemical Devices
“Corn straw-derived hydrochar was activated via microwave-assisted hydrothermal activation technique by Liu et al. (2020) [117].”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“117. Li, Y.; Liu, X. Activated carbon/ZnO composites prepared using hydrochars as intermediate and their electrochemical performance in supercapacitor. Mater. Chem. Phys. 2014, 148, 380-386. [CrossRef]”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| Apple pomace | 17 12 | 250 300 | 0.08 | 63.2 73 | 0.1 0.06 | 26 32 | [60] |”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“60. Li, C.; Yang, X.; Zhang, Z.; Zhou, D.; Zhang, L.; Zhang, S.; Chen, J. Hydrothermal liquefaction of desert shrub Salix psammophila to high value-added chemicals and hydrochar with recycled processing water. BioResources 2013, 8, 2981-2997. [CrossRef]”
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519 · cited 1×
“The examples of dry biomasses are woody, herbaceous, and agricultural biomass, whereas wet biomasses include algae, sewage sludge, cattle manure, and industrial effluents [4,5].”
BackgroundMohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
A review of biochar and its use and function in soil
Sohi, S. P., Krull, E., Lopez-Capel, E., & Bol, R. (2010) · Advances in Agronomy · doi:10.1016/s0065-2113(10)05002-9 · Cited by 2,240 · cited 1×
“…application of crop improvement in agricultural sectors depends on the nature of the hydrochar used, the type of feedstock used, the type of the production process and process conditions, the morphological properties, and the nature of the soil, i.e., loamy clay, fertile, sandy, and infertile [81].”
BackgroundHydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765 · cited 1×
“Bio/hydrochar has received much attention as its feedstocks are abundantly available, renewable and inexpensive [7,15].”
BackgroundLibra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756 · cited 1×
“Thus, hydrochar has higher atomic ratios of hydrogen to carbon and oxygen to carbon, compared to those in biochar [24,25].”
BackgroundKambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746 · cited 1×
“Reaction conditions can affect significantly the yield and characteristics of hydrochar and biochar [20,21].”
BackgroundA review on hydrothermal liquefaction of biomass
Gollakota, A. R. K., Kishore, N., & Gu, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.178 · Cited by 1,306 · cited 1×
“In recent decades, many researchers have focused on finding sustainable sources for fuel production due to the incremental worldwide energy demand, environmental concerns related to greenhouse gas emissions, and the finite supply of energy from non-renewable fossil fuels [1–3].”
BackgroundProduction and utilization of biochar: A review
Cha, J. S., Park, S. H., Jung, S.-C., Ryu, C., Jeon, J.-K., Shin, M.-C., & Park, Y.-K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.06.002 · Cited by 1,293 · cited 1×
“Physical or thermal activation can be done through gasification with reactive steam, a gas such as O 2 and CO 2 or a mixture of steam and CO 2 as an oxidizing agent [73,74].”
BackgroundMycorrhizal responses to biochar in soil–concepts and mechanisms
Warnock, D. D., Lehmann, J., Kuyper, T. W., & Rillig, M. C. (2007) · Plant and Soil · doi:10.1007/s11104-007-9391-5 · Cited by 1,269
Cited by
Biochar for a sustainable future: Environmentally friendly production and diverse applications
Afshar, M., & Mofatteh, S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102433 · Cited by 233
Role of biochar toward carbon neutrality
Wang, L., Deng, J., Yang, X., Hou, R., & Hou, D. (2023) · Carbon Research · doi:10.1007/s44246-023-00035-7 · Cited by 195
Petrović, J., Ercegović, M., Simić, M., Koprivica, M., Dimitrijević, J., Jovanović, A., & Janković Pantić, J. (2024) · Processes · doi:10.3390/pr12010207 · Cited by 191
“Despite being considered as a waste, biomass is a valuable renewable resource and energy source [1–3].”
BackgroundInfluentialDensification of waste biomass for manufacturing solid biofuel pellets: a review
Sarker, T. R., Nanda, S., Meda, V., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01510-0 · Cited by 142
Self-citationKhanzada, A. K., Al-Hazmi, H. E., Kurniawan, T. A., Majtacz, J. B., Piechota, G., Kumar, G., Ezzati, P., Saeb, M. R., Rabiee, N., Karimi‐Maleh, H., et al. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173972 · Cited by 134
Metadata
- Authors
- Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K.
- Affiliations
- University of Saskatchewan (CA)
- Corresponding author
- Dalai, Ajay K.
- Venue
- Catalysts
- Publisher
- MDPI AG
- Published
- 2021-08-02
- Volume
- 11
- Issue
- 8
- Pages
- 939
- ISSN
- 2073-4344 (ISSN-L)
- OpenAlex
- W3188189605
- Cited by
- 363
- References
- 122
- Citations by year
- 2026: 95 · 2025: 99 · 2024: 84 · 2023: 52 · 2022: 28 · 2021: 5
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Catalysts (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Canada Research Chairs
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Keywords
- hydrochar, hydrothermal carbonization, biomass char, biomass conversion, pollutant adsorption, catalyst supports, carbon sequestration, bioenergy, electrochemistry, agricultural applications, renewable fuels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrochar: A Review on Its Production Technologies and Applications. https://app.cochat.ai/papers/10.3390/catal11080939
- The paper
- Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K. (2021). Hydrochar: A Review on Its Production Technologies and Applications. Catalysts. https://doi.org/10.3390/catal11080939
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.