The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
A comprehensive overview and recent advances on polyhydroxyalkanoates (PHA) production using various organic waste streams
Abstract
Polyhydroxyalkanoates (PHA) are appealing as an important alternative to replace synthetic plastics owing to its comparable physicochemical properties to that of synthetic plastics, and biodegradable and biocompatible nature. This review gives an inclusive overview of the current research activities dealing with PHA production by utilizing different waste fluxes generated from food, milk and sugar processing industries. Valorization of these waste fluxes makes the process cost effective and practically applicable. Recent advances in the approaches adopted for waste treatment, fermentation strategies, and genetic engineering can give insights to the researchers for future direction of waste to bioplastics production. Lastly, synthesis and application of PHA-nanocomposites, research and development challenges, future perspectives for sustainable and cost-effective PHB production are also discussed. In addition, the review addresses the useful information about the opportunities and confines associated with the sustainable PHA production using different waste streams and their evaluation for commercial implementation within a biorefinery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lignin utilization: A review of lignin depolymerization from various aspects
Chio, C., Sain, M., & Qin, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.008 · Cited by 1,209
Biomass-based energy fuel through biochemical routes: A review
Saxena, R. C., Adhikari, D. K., & Goyal, H. B. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.07.011 · Cited by 870
Lignin valorization through integrated biological funneling and chemical catalysis
Linger, J. G., Vardon, D. R., Guarnieri, M. T., Karp, E. M., Hunsinger, G. B., Franden, M. A., Johnson, C. W., Chupka, G., Strathmann, T. J., Pienkos, P. T., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1410657111 · Cited by 856
Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production
Kourmentza, C., Plácido, J., Venetsaneas, N., Burniol-Figols, A., Varrone, C., Gavala, H. N., & Reis, M. A. M. (2017) · Bioengineering · doi:10.3390/bioengineering4020055 · Cited by 779
Polyhydroxyalkanoates: Characteristics, production, recent developments and applications
Raza, Z. A., Abid, S., & Banat, I. M. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.10.001 · Cited by 708
Anjum, A., Zuber, M., Zia, K. M., Noreen, A., Anjum, M. N., & Tabasum, S. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.069 · Cited by 665
A review on lignin structure, pretreatments, fermentation reactions and biorefinery potential
Ponnusamy, V. K., Nguyen, D. D., Dharmaraja, J., Shobana, S., Banu, J. R., Saratale, R. G., Chang, S. W., & Kumar, G. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.070 · Cited by 590
Self-citationNext generation industrial biotechnology based on extremophilic bacteria
Chen, G.-Q., & Jiang, X.-R. (2018) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2017.11.016 · Cited by 422
Albuquerque, M. G. E., Eiroa, M., Torres, C., Nunes, B. R., & Reis, M. A. M. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.05.011 · Cited by 394
Saratale, R. G., Karuppusamy, I., Saratale, G. D., Pugazhendhi, A., Kumar, G., Park, Y., Ghodake, G. S., Bharagava, R. N., Banu, J. R., & Shin, H. S. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.05.045 · Cited by 388
Self-citationAkiyama, M., Tsuge, T., & Doi, Y. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00400-7 · Cited by 385
Biological valorization strategies for converting lignin into fuels and chemicals
Chen, Z., & Wan, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.166 · Cited by 334
A review on biopolymer production via lignin valorization
Rajesh Banu, J., Kavitha, S., Yukesh Kannah, R., Poornima Devi, T., Gunasekaran, M., Kim, S.-H., & Kumar, G. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121790 · Cited by 319
Self-citationRecent developments in Polyhydroxyalkanoates (PHAs) production – A review
Sabapathy, P. C., Devaraj, S., Meixner, K., Anburajan, P., Kathirvel, P., Ravikumar, Y., Zabed, H. M., & Qi, X. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123132 · Cited by 275
Sirohi, R., Prakash Pandey, J., Kumar Gaur, V., Gnansounou, E., & Sindhu, R. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123536 · Cited by 268
Budde, C. F., Riedel, S. L., Willis, L. B., Rha, C., & Sinskey, A. J. (2011) · Applied and Environmental Microbiology · doi:10.1128/aem.02429-10 · Cited by 248
Carbon Sources for Polyhydroxyalkanoates and an Integrated Biorefinery
Jiang, G., Hill, D., Kowalczuk, M., Johnston, B., Adamus, G., Irorere, V., & Radecka, I. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17071157 · Cited by 240
Koller, M., Hesse, P., Bona, R., Kutschera, C., Atlić, A., & Braunegg, G. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600211 · Cited by 238
Microbial utilization and biopolyester synthesis of bagasse hydrolysates
Yu, J., & Stahl, H. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.03.071 · Cited by 225
Obruca, S., Petrik, S., Benesova, P., Svoboda, Z., Eremka, L., & Marova, I. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-5653-3 · Cited by 217
Production of polyhydroxyalkanoates from waste frying oil by Cupriavidus necator
Verlinden, R. A., Hill, D. J., Kenward, M. A., Williams, C. D., Piotrowska-Seget, Z., & Radecka, I. K. (2011) · AMB Express · doi:10.1186/2191-0855-1-11 · Cited by 214
Salvachúa, D., Rydzak, T., Auwae, R., De Capite, A., Black, B. A., Bouvier, J. T., Cleveland, N. S., Elmore, J. R., Furches, A., Huenemann, J. D., et al. (2020) · Microbial Biotechnology · doi:10.1111/1751-7915.13481 · Cited by 210
Ryu, H. W., Hahn, S. K., Chang, Y. K., & Chang, H. N. (1997) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19970705)55:1<28::aid-bit4>3.0.co;2-z · Cited by 209
Choi, S. Y., Rhie, M. N., Kim, H. T., Joo, J. C., Cho, I. J., Son, J., Jo, S. Y., Sohn, Y. J., Baritugo, K.-A., Pyo, J., et al. (2020) · Metabolic Engineering · doi:10.1016/j.ymben.2019.05.009 · Cited by 207
Arrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196
Albuquerque, P. B. S., & Malafaia, C. B. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.026 · Cited by 193
Aeschelmann, F., & Carus, M. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.28999.fae · Cited by 188
Favaro, L., Basaglia, M., & Casella, S. (2019) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1944 · Cited by 185
Novikova, L. N., Pettersson, J., Brohlin, M., Wiberg, M., & Novikov, L. N. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.11.033 · Cited by 182
Alsafadi, D., & Al-Mashaqbeh, O. (2017) · New Biotechnology · doi:10.1016/j.nbt.2016.05.003 · Cited by 176
Cavalheiro, J. M. B. T., Raposo, R. S., de Almeida, M. C. M. D., Teresa Cesário, M., Sevrin, C., Grandfils, C., & da Fonseca, M. M. R. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.01.176 · Cited by 175
Atabani, A. E., Al-Muhtaseb, A. H., Kumar, G., Saratale, G. D., Aslam, M., Khan, H. A., Said, Z., & Mahmoud, E. (2019) · Fuel · doi:10.1016/j.fuel.2019.115640 · Cited by 174
Self-citationTrends in the biomanufacture of polyhydroxyalkanoates with focus on downstream processing
Kosseva, M. R., & Rusbandi, E. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.054 · Cited by 172
Colombo, B., Pepè Sciarria, T., Reis, M., Scaglia, B., & Adani, F. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.07.024 · Cited by 171
Engineering the diversity of polyesters
Meng, D.-C., Shen, R., Yao, H., Chen, J.-C., Wu, Q., & Chen, G.-Q. (2014) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2014.02.013 · Cited by 170
Engineering Biosynthesis Mechanisms for Diversifying Polyhydroxyalkanoates
Chen, G., Hajnal, I., Wu, H. Y., Lv, L., & Ye, J. (2015) · Trends in biotechnology · doi:10.1016/j.tibtech.2015.07.007 · Cited by 169
Biotechnological conversion of spent coffee grounds into polyhydroxyalkanoates and carotenoids
Obruča, S., Benešová, P., Kučera, D., Petrik, S., & Márová, I. (2015) · New Biotechnology · doi:10.1016/j.nbt.2015.02.008 · Cited by 167
Oliveira, F. C., Dias, M. L., Castilho, L. R., & Freire, D. M. G. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.02.022 · Cited by 166
Production of polyhydroxyalkanoates using hydrolysate of spent coffee grounds
Obruča, S., Benešová, P., Petrik, S., Oborná, J., Přikryl, R., & Márová, I. (2014) · Process Biochemistry · doi:10.1016/j.procbio.2014.05.013 · Cited by 166
Polyhydroxyalkanoates production with Ralstonia eutropha from low quality waste animal fats
Riedel, S. L., Jahns, S., Koenig, S., Bock, M. C. E., Brigham, C. J., Bader, J., & Stahl, U. (2015) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2015.09.002 · Cited by 165
Systems biology-guided biodesign of consolidated lignin conversion
Lin, L., Cheng, Y., Pu, Y., Sun, S., Li, X., Jin, M., Pierson, E. A., Gross, D. C., Dale, B. E., Dai, S. Y., et al. (2016) · Green Chemistry · doi:10.1039/c6gc01131d · Cited by 165
Recent Advances in Sustainable Plastic Upcycling and Biopolymers
Sohn, Y. J., Kim, H. T., Baritugo, K., Jo, S. Y., Song, H. M., Park, S. Y., Park, S. K., Pyo, J., Cha, H. G., Kim, H., et al. (2020) · Biotechnology Journal · doi:10.1002/biot.201900489 · Cited by 165
Recent advances in polyhydroxyalkanoate production: Feedstocks, strains and process developments
Li, M., & Wilkins, M. R. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.04.082 · Cited by 165
Dattatraya Saratale, G., Bhosale, R., Shobana, S., Banu, J. R., Pugazhendhi, A., Mahmoud, E., Sirohi, R., Kant Bhatia, S., Atabani, A. E., Mulone, V., et al. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123800 · Cited by 164
Self-citationDalsasso, R. R., Pavan, F. A., Bordignon, S. E., Aragão, G. M. F. D., & Poletto, P. (2019) · Process Biochemistry · doi:10.1016/j.procbio.2019.07.007 · Cited by 162
Liu, Z.-H., Olson, M. L., Shinde, S., Wang, X., Hao, N., Yoo, C. G., Bhagia, S., Dunlap, J. R., Pu, Y., Kao, K. C., et al. (2017) · Green Chem. · doi:10.1039/c7gc02057k · Cited by 160
Pais, J., Serafim, L. S., Freitas, F., & Reis, M. A. M. (2015) · New Biotechnology · doi:10.1016/j.nbt.2015.06.001 · Cited by 155
Nath, A., Dixit, M., Bandiya, A., Chavda, S., & Desai, A. J. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2007.10.017 · Cited by 154
Chen, X., Yin, J., Ye, J., Zhang, H. M., Che, X., Ma, Y., Li, M., Wu, L., & Chen, G. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.149 · Cited by 154
Yao, Y., Zhan, X.-Y., Zhang, J., Zou, X., Wang, Z., Xiong, Y., Chen, J., & Chen, G. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.008 · Cited by 153
Ibrahim, M. H. A., & Steinbüchel, A. (2009) · Applied and Environmental Microbiology · doi:10.1128/aem.01162-09 · Cited by 151
Obruča, S., Márová, I., Šnajdar, O., Mravcová, L., & Svoboda, Z. (2010) · Biotechnology Letters · doi:10.1007/s10529-010-0376-8 · Cited by 150
Peng, Q., Zhang, Z., Gong, T., Chen, G., & Sun, X. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.072 · Cited by 150
Saratale, G. D., & Oh, M. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.07.034 · Cited by 148
Polyhydroxyalkanoates, a family of natural polymers, and their applications in drug delivery
Nigmatullin, R., Thomas, P., Lukasiewicz, B., Puthussery, H., & Roy, I. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4685 · Cited by 145
Nanocomposites Based on Biodegradable Polymers
Armentano, I., Puglia, D., Luzi, F., Arciola, C. R., Morena, F., Martino, S., & Torre, L. (2018) · Materials · doi:10.3390/ma11050795 · Cited by 144
Cruz, M. V., Paiva, A., Lisboa, P. F., Freitas, F., Alves, V. D., Simões, P. C., Barreiros, S. F., & Reis, M. A. M. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.02.013 · Cited by 142
Beccari, M., Bertin, L., Dionisi, D., Fava, F., Lampis, S., Majone, M., Valentino, F., Vallini, G., & Villano, M. (2009) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2173 · Cited by 137
Kumar, M., Singhal, A., Verma, P. K., & Thakur, I. S. (2017) · ACS Omega · doi:10.1021/acsomega.7b01615 · Cited by 134
Self-citationBhatia, S. K., Kim, J., Kim, M., Kim, J., Hong, J. W., Hong, Y. G., Kim, H., Jeon, J.-M., Kim, S., Ahn, J., et al. (2017) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-017-1861-4 · Cited by 128
Whey-derived valuable products obtained by microbial fermentation
Pescuma, M., de Valdez, G. F., & Mozzi, F. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6766-z · Cited by 126
Electrospun poly(hydroxybutyrate)/chitosan blend fibrous scaffolds for cartilage tissue engineering
Sadeghi, D., Karbasi, S., Razavi, S., Mohammadi, S., Shokrgozar, M. A., & Bonakdar, S. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44171 · Cited by 125
Marsudi, S., Unno, H., & Hori, K. (2008) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-008-1388-3 · Cited by 122
Koller, M., & Braunegg, G. (2018) · The EuroBiotech Journal · doi:10.2478/ebtj-2018-0013 · Cited by 120
Povolo, S., Paolo, T., Basaglia, M., & Casella, S. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.029 · Cited by 119
You, M., Peng, G., Li, J., Ma, P., Wang, Z., Shu, W., Peng, S., & Chen, G. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.009 · Cited by 119
Sen, K. Y., Hussin, M. H., & Baidurah, S. (2018) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2018.11.006 · Cited by 119
Production of polyhydroxyalkanoates on waste frying oil employing selected Halomonas strains
Pernicová, I., Kučera, D., Nebesářová, J., et al. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122028 · Cited by 116
Zhang, H., Obias, V., Gonyer, K., & Dennis, D. E. (1994) · Applied and Environmental Microbiology · doi:10.1128/aem.60.4.1198-1205.1994 · Cited by 114
Current applications of different type of aqueous two-phase systems
Yau, Y. K., Ooi, C. W., Ng, E., Lan, J. C., Ling, T. C., & Show, P. L. (2015) · Bioresources and Bioprocessing · doi:10.1186/s40643-015-0078-0 · Cited by 113
Colombo, B., Calvo, M. V., Sciarria, T. P., Scaglia, B., Kizito, S., D’Imporzano, G., & Adani, F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.05.052 · Cited by 113
Economic and environmental analysis of PHAs production process
Leong, Y. K., Show, P. L., Lan, J. C., Loh, H., Lam, H. L., & Ling, T. C. (2017) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-017-1377-2 · Cited by 111
Microbial production of polyhydroxyalkanoate block copolymer by recombinant Pseudomonas putida
Li, S. Y., Dong, C. L., Wang, S. Y., Ye, H. M., & Chen, G. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-3069-2 · Cited by 110
Microbial production of poly(hydroxyalkanoate)s from waste edible oils
Taniguchi, I., Kagotani, K., & Kimura, Y. (2003) · Green Chemistry · doi:10.1039/b304800b · Cited by 104
Saratale, G. D., Saratale, R. G., Varjani, S., Cho, S., Ghodake, G. S., Kadam, A. A., Mulla, S. I., Bharagava, R. N., Kim, D., & Shin, H. S. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112425 · Cited by 104
Self-citationSabri, S., Nielsen, L. K., & Vickers, C. E. (2012) · Applied and Environmental Microbiology · doi:10.1128/aem.02544-12 · Cited by 102
Van-Thuoc, D., My, D. N., Loan, T. T., & Sudesh, K. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.09.063 · Cited by 100
Israni, N., Venkatachalam, P., Gajaraj, B., Varalakshmi, K. N., & Shivakumar, S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109884 · Cited by 99
Shahzad, K., Narodoslawsky, M., Sagir, M., Ali, N., Ali, S., Rashid, M. I., Ismail, I. M. I., & Koller, M. (2017) · Waste Management · doi:10.1016/j.wasman.2017.05.047 · Cited by 98
Production of polyhydroxyalkanoates from cheese whey employing Bacillus megaterium CCM 2037
Obruča, S., Márová, I., Melušová, S., & Mravcová, L. (2011) · Annals of Microbiology · doi:10.1007/s13213-011-0218-5 · Cited by 98
Saratale, R. G., Ghodake, G. S., Shinde, S., Cho, S., Saratale, G. D., Pugazhendhi, A., & Bharagava, R. N. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.072 · Cited by 98
Self-citationDevelopment of PLA‐PHB‐based biodegradable active packaging and its application to salmon
Ma, Y., Li, L., & Wang, Y. (2018) · Packaging Technology and Science · doi:10.1002/pts.2408 · Cited by 97
Process optimization for efficient biomediated PHA production from animal-based waste streams
Titz, M., Kettl, K.-H., Shahzad, K., Koller, M., Schnitzer, H., & Narodoslawsky, M. (2012) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-012-0464-7 · Cited by 95
Wang, X., Lin, L., Dong, J., Ling, J., Wang, W., Wang, H., Zhang, Z., & Yu, X. (2018) · Applied and Environmental Microbiology · doi:10.1128/aem.01469-18 · Cited by 95
Pavan, F. A., Junqueira, T. L., Watanabe, M. D. B., Bonomi, A., Quines, L. K., Schmidell, W., & de Aragão, G. M. F. (2019) · Biochemical Engineering Journal · doi:10.1016/j.bej.2019.03.009 · Cited by 95
Amini, F., Semnani, D., Karbasi, S., & Banitaba, S. N. (2018) · International Journal of Polymeric Materials · doi:10.1080/00914037.2018.1506982 · Cited by 92
Show, P. L., Ooi, C. W., Anuar, M. S., Ariff, A., Yusof, Y. A., Chen, S. K., Annuar, M. S. M., & Ling, T. C. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.03.018 · Cited by 88
Controlled autolysis facilitates the polyhydroxyalkanoate recovery in Pseudomonas putida KT2440
Martínez, V., García, P., García, J. L., & Prieto, M. (2011) · Microbial Biotechnology · doi:10.1111/j.1751-7915.2011.00257.x · Cited by 88
Si, M., Xu, Y., Liu, M., Shi, M., Wang, Z., Wang, S., Zhang, J., Gao, C., Chai, L., & Shi, Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01336 · Cited by 88
Metabolic engineering of Ralstonia eutropha for the production of polyhydroxyalkanoates from sucrose
Park, S. J., Jang, Y., Noh, W., Oh, Y. H., Lee, H., David, Y., Baylon, M. G., Shin, J., Yang, J. E., Choi, S. Y., et al. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25469 · Cited by 84
Kovalcik, A., Kučera, D., Matoušková, P., Pernicová, I., Obruča, S., Kalina, M., Enev, V., & Márová, I. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.05.028 · Cited by 81
Effect of feeding regimens on polyhydroxybutyrate production from food wastes by Cupriavidus necator
Hafuka, A., Sakaida, K., Satoh, H., Takahashi, M., Watanabe, Y., & Okabe, S. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.09.018 · Cited by 80
Lu, X., Ciraolo, E., Stefenia, R., Chen, G., Zhang, Y., & Hirsch, E. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-011-3101-1 · Cited by 79
Saratale, G. D., Jung, M.-Y., & Oh, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.01.028 · Cited by 79
Bugnicourt, E., Schmid, M. C., McNerney, O., Wildner, J., Smykala, L., Lazzeri, A., & Cinelli, P. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/496207 · Cited by 78
Park, S. J., Jang, Y., Lee, H., Park, A., Yang, J. E., Shin, J., Oh, Y. H., Song, B. K., Jegal, J., Lee, S. H., et al. (2013) · Metabolic Engineering · doi:10.1016/j.ymben.2013.08.002 · Cited by 78
Devaraj, S., Sabapathy, P. C., Venkatraman, P., Easwaran, M., Sureka, C. S., & Kathirvel, P. (2018) · Informatics in Medicine Unlocked · doi:10.1016/j.imu.2018.04.009 · Cited by 78
Park, S. J., Ahn, W. S., Green, P. R., & Lee, S. Y. (2001) · Biotechnology and Bioengineering · doi:10.1002/bit.1097 · Cited by 72
Purama, R. K., Al-Sabahi, J. N., & Sudesh, K. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.04.013 · Cited by 72
Tufail, S., Munir, S., & Jamil, N. (2017) · Brazilian Journal of Microbiology · doi:10.1016/j.bjm.2017.02.008 · Cited by 71
Bera, A., Dubey, S., Bhayani, K., Mondal, D., Mishra, S., & Ghosh, P. K. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.08.037 · Cited by 69
Fradinho, J., Reis, M., & Oehmen, A. (2016) · Water Research · doi:10.1016/j.watres.2016.09.022 · Cited by 69
Zahari, M. A. K. M., Ariffin, H., Mokhtar, M. N., Salihon, J., Shirai, Y., & Hassan, M. A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.010 · Cited by 68
Saponified waste palm oil as an attractive renewable resource for mcl-polyhydroxyalkanoate synthesis
Możejko‐Ciesielska, J., & Ciesielski, S. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.04.014 · Cited by 68
Agro-Industrial Waste Materials as Substrates for the Production of Poly(3-Hydroxybutyric Acid)
Sukan, A., Roy, I., & Keshavarz, T. (2014) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2014.54027 · Cited by 68
Obruča, S., Benešová, P., Oborná, J., & Márová, I. (2013) · Biotechnology Letters · doi:10.1007/s10529-013-1407-z · Cited by 67
Obruča, S., Šnajdar, O., Svoboda, Z., & Márová, I. (2013) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-013-1410-5 · Cited by 66
Acuña, J. M. B., Aravena-Carrasco, C., Gutiérrez‐Urrutia, I., Duchens, D., & Poblete‐Castro, I. (2018) · Process Biochemistry · doi:10.1016/j.procbio.2018.10.012 · Cited by 63
Talan, A., Kaur, R., Tyagi, R. D., & Drogui, P. (2020) · Bioresource Technology Reports · doi:10.1016/j.biteb.2020.100496 · Cited by 63
Ray, S., Prajapati, V., Patel, K. C., & Trivedi, U. B. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.02.002 · Cited by 61
Reactive blends based on polyhydroxyalkanoates: Preparation and biomedical application.
Ke, Y., Zhang, X.-Z., Ramakrishna, S., He, L.-M., & Wu, G. (2017) · Materials Science and Engineering C: Materials for Biological Applications · doi:10.1016/j.msec.2016.03.114 · Cited by 60
Arumugam, A., Senthamizhan, S. G., Venkatachalam, P., & Sudalai, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.012 · Cited by 59
Basnett, P., Marcello, E., Lukasiewicz, B., Panchal, B., Nigmatullin, R., Knowles, J. C., & Roy, I. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6183-9 · Cited by 59
Saratale, R. G., Cho, S., Ghodake, G. S., Shin, H.-S., Saratale, G. D., Park, Y., Lee, H., Bharagava, R. N., & Kim, D. (2020) · Polymers · doi:10.3390/polym12081704 · Cited by 59
Self-citationTripathi, A. D., Joshi, T. R., Srivastava, S. K., Khosravi‐Darani, K., Khade, S. M., & Srivastava, J. (2019) · Preparative Biochemistry & Biotechnology · doi:10.1080/10826068.2019.1591982 · Cited by 58
Conversion of no/low value waste frying oils into biodiesel and polyhydroxyalkanoates
Vastano, M., Corrado, I., Sannia, G., Solaiman, D. K. Y., & Pezzella, C. (2019) · Scientific Reports · doi:10.1038/s41598-019-50278-x · Cited by 56
Hambali, N., Huong, K., & Abdullah, A. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.121 · Cited by 55
Fukui, T., Mukoyama, M., Orita, I., & Nakamura, S. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-5831-3 · Cited by 54
Salamanca-Cardona, L., Ashe, C. S., Stipanovic, A. J., & Nomura, C. T. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-5398-4 · Cited by 54
Saranya, V., & Shenbagarathai, R. (2011) · Brazilian Journal of Microbiology · doi:10.1590/s1517-83822011000300032 · Cited by 54
Lopar, M., Vrana, I., Atlić, A., Koller, M., Braunegg, G., & Horvat, P. (2013) · Biochemical Engineering Journal · doi:10.1016/j.bej.2013.07.003 · Cited by 52
Pais, J., Farinha, I., Freitas, F., Serafim, L. S., Martínez, V., Martínez, J. C., Arévalo-Rodrı́guez, M., Prieto, M. A., & Reis, M. A. M. (2013) · Enzyme and Microbial Technology · doi:10.1016/j.enzmictec.2013.11.004 · Cited by 45
Sjölin, M., Thuvander, J., Wallberg, O., & Lipnizki, F. (2019) · Membranes · doi:10.3390/membranes10010005 · Cited by 44
Engineering Delftia acidovorans DSM39 to produce polyhydroxyalkanoates from slaughterhouse waste
Romanelli, M. G., Povolo, S., Favaro, L., Fontana, F., Basaglia, M., & Casella, S. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.03.049 · Cited by 42
Meneses, L., Pereira, J. R., Sevrin, C., Grandfils, C., Paiva, A., Reis, M. A. M., & Freitas, F. (2019) · New Biotechnology · doi:10.1016/j.nbt.2019.10.002 · Cited by 42
Możejko‐Ciesielska, J., & Ciesielski, S. (2014) · Biotechnology Progress · doi:10.1002/btpr.1914 · Cited by 36
Ramadas, N. V., Sindhu, R., Binod, P., & Pandey, A. (2012) · Annals of Microbiology · doi:10.1007/s13213-012-0584-7 · Cited by 30
Valdés, J., Kutralam-Muniasamy, G., Vergara‐Porras, B., Marsch, R., Pérez‐Guevara, F., & López-Cuellar, M. D. R. (2017) · New Biotechnology · doi:10.1016/j.nbt.2017.08.001 · Cited by 18
Cited by
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
A Review on Properties and Application of Bio-Based Poly(Butylene Succinate)
Rafiqah, S. A., Khalina, A., Harmaen, A. S., Tawakkal, I. A., Zaman, K., Asim, M., Nurrazi, M. N., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13091436 · Cited by 398
Chong, J. W. R., Khoo, K. S., Yew, G. Y., Leong, W. H., Lim, J. W., Lam, M. K., Ho, Y.-C., Ng, H. S., Munawaroh, H. S. H., & Show, P. L. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125947 · Cited by 163
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications
Pryadko, A., Surmeneva, M. A., & Surmenev, R. A. (2021) · Polymers · doi:10.3390/polym13111738 · Cited by 102
Metadata
- Authors
- Ganesh Saratale, R., Cho, S.-K., Dattatraya Saratale, G., Kadam, A. A., Ghodake, G. S., Kumar, M., Naresh Bharagava, R., Kumar, G., Su Kim, D., Mulla, S. I., & Seung Shin, H.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 325
- Pages
- 124685
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W3119984500
- Cited by
- 285
- References
- 128
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.