A review on physico-chemical delignification as a pretreatment of lignocellulosic biomass for enhanced bioconversion
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Effective pretreatment of lignocellulosic biomass (LCB) is one of the most important steps in biorefinery, ensuring the quality and commercial viability of the overall bioprocess. Lignin recalcitrance in LCB is a major bottleneck in biological conversion as the polymerization of lignin with hemicellulose hinders enzyme accessibility and further bioconversion to fuels and chemicals. Therefore, there is a need to delignify LCB to ease further bioprocessing. The efficiency of delignification, quality and quantity of the desired products, and generation of inhibitors depend upon the type of pretreatment employed. This review summarizes different single and integrated physicochemical pretreatments for delignification. Additionally, conditions required for effective delignification and the advantages and drawbacks of each method were evaluated. Advances in overcoming the recalcitrance of residual lignin to saccharification and the methods to recover lignin after delignification are also discussed. Efficient lignin recovery and valorization strategies provide an avenue for the sustainable lignocellulose biorefinery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
Guidelines for performing lignin-first biorefining
Abu-Omar, M. M., Barta, K., Beckham, G. T., Luterbacher, J. S., Ralph, J., Rinaldi, R., Román-Leshkov, Y., Samec, J. S. M., Sels, B. F., & Wang, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02870c · Cited by 913
Xu, Z., Lei, P., Zhai, R., Wen, Z., & Jin, M. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1376-0 · Cited by 276
Chen, Z., Bai, X., A, L., & Wan, C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02541 · Cited by 221
Primary and secondary lignin pyrolysis reaction pathways
Jegers, H. E., & Klein, M. T. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200028a030 · Cited by 182
Cited by
Babu, S., Singh Rathore, S., Singh, R., Kumar, S., Singh, V. K., Yadav, S. K., Yadav, V., Raj, R., Yadav, D., Shekhawat, K., et al. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127566 · Cited by 298
Archana, K., Visckram, A. S., Senthil Kumar, P., Manikandan, S., Saravanan, A., & Natrayan, L. (2024) · Fuel · doi:10.1016/j.fuel.2023.130298 · Cited by 253
Integrated biorefinery approaches for the industrialization of cellulosic ethanol fuel
Qiao, J., Cui, H., Wang, M., Fu, X., Wang, X., Li, X., & Huang, H. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127516 · Cited by 72
Zhao, Z.-T., Ding, J., Pang, J.-W., Bao, M.-Y., Luo, G., Wang, B.-Y., Liu, B.-F., Zhang, L.-Y., Ren, N.-Q., & Yang, S.-S. (2025) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2025.2484892 · Cited by 20
“DES is less costly than ILs and could also be recycled after precipitating lignin from the liquid (Banu Jamaldheen et al., 2022).”
Metadata
- Authors
- Banu Jamaldheen, S., Kurade, M. B., Basak, B., Yoo, C. G., Oh, K. K., Jeon, B.-H., & Kim, T. H.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 346
- Pages
- 126591
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W4200342719
- Cited by
- 152
- References
- 5
- FWCI
- 6.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on physico-chemical delignification as a pretreatment of lignocellulosic biomass for enhanced bioconversion. https://app.cochat.ai/papers/10.1016/j.biortech.2021.126591
- The paper
- Banu Jamaldheen, S., Kurade, M. B., Basak, B., Yoo, C. G., Oh, K. K., Jeon, B.-H., & Kim, T. H. (2022). A review on physico-chemical delignification as a pretreatment of lignocellulosic biomass for enhanced bioconversion. Bioresource Technology. https://doi.org/10.1016/j.biortech.2021.126591
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.