The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
One-step and large-scale fabrication of flexible and wearable humidity sensor based on laser-induced graphene for real-time tracking of plant transpiration at bio-interface
Abstract
The rapidly growing demand for humidity sensing in various applications such as noninvasive epidermal sensing, water status tracking of plants, and environmental monitoring has triggered the development of high-performance humidity sensors. In particular, timely communication with plants to understand their physiological status may facilitate preventing negative influence of environmental stress and enhancing agricultural output. In addition, precise humidity sensing at bio-interface requires the sensor to be both flexible and stable. However, challenges still exist for the realization of efficient and large-scale production of flexible humidity sensors for bio-interface applications. Here, a convenient, effective, and robust method for massive production of flexible and wearable humidity sensor is proposed, using laser direct writing technology to produce laser-induced graphene interdigital electrode (LIG-IDE). Compared to previous methods, this strategy abandons the complicated and costly procedures for traditional IDE preparation. Using graphene oxide (GO) as the humidity-sensitive material, a flexible capacitive-type GO-based humidity sensor with low hysteresis, high sensitivity (3215.25 pF/% RH), and long-term stability (variation less than ± 1%) is obtained. These superior properties enable the sensor with multifunctional applications such as noncontact humidity sensing and human breath monitoring. In addition, this flexible humidity sensor can be directly attached onto the plant leaves for real-time and long-term tracking transpiration from the stomata, without causing any damage to plants, making it a promising candidate for next-generation electronics for intelligent agriculture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Laser‐Induced Graphene: From Discovery to Translation
Ye, R., James, D. K., & Tour, J. M. (2019) · Advanced Materials · doi:10.1002/adma.201803621 · Cited by 942
Ultrafast Graphene Oxide Humidity Sensors
Borini, S., White, R., Wei, D., Astley, M., Haque, S., Spigone, E., Harris, N., Kivioja, J., & Ryhänen, T. (2013) · ACS Nano · doi:10.1021/nn404889b · Cited by 900
Ultrahigh humidity sensitivity of graphene oxide
Bi, H., Yin, K., Xie, X., Ji, J., Wan, S., Sun, L., Terrones, M., & Dresselhaus, M. S. (2013) · Scientific Reports · doi:10.1038/srep02714 · Cited by 707
The Future Challenges of Food and Agriculture: An Integrated Analysis of Trends and Solutions
Calicioglu, O., Flammini, A., Bracco, S., Bellù, L., & Sims, R. (2019) · Sustainability · doi:10.3390/su11010222 · Cited by 563
Compliant plant wearables for localized microclimate and plant growth monitoring
Nassar, J. M., Khan, S. M., Villalva, D. R., Nour, M. M., Almuslem, A. S., & Hussain, M. M. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0039-8 · Cited by 251
Recent Advances in Graphene-Based Humidity Sensors
Lv, C., Hu, C., Luo, J., Liu, S., Qiao, Y., Zhang, Z., Song, J., Shi, Y., Cai, J., & Watanabe, A. (2019) · Nanomaterials · doi:10.3390/nano9030422 · Cited by 251
Novel resistive-type humidity sensor based on multiwall carbon nanotube/polyimide composite films
Yoo, K.-P., Lim, L.-T., Min, N.-K., Lee, M. J., Lee, C. J., & Park, C.-W. (2010) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.11.041 · Cited by 230
Organic Thin‐Film Capacitive and Resistive Humidity Sensors: A Focus Review
Najeeb, M. A., Ahmad, Z., & Shakoor, R. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800969 · Cited by 205
Water transport, perception, and response in plants
Scharwies, J. D., & Dinneny, J. R. (2019) · Journal of Plant Research · doi:10.1007/s10265-019-01089-8 · Cited by 176
Zhao, Y., Gao, S., Zhu, J., Li, J., Xu, H., Xu, K., Cheng, H., & Huang, X. L. (2019) · ACS Omega · doi:10.1021/acsomega.9b01035 · Cited by 141
Oren, S., Ceylan, H., Schnable, P. S., & Dong, L. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700223 · Cited by 139
Paper as Active Layer in Inkjet-Printed Capacitive Humidity Sensors
Gaspar, C., Olkkonen, J. T., Passoja, S., & Smolander, M. H. (2017) · Sensors · doi:10.3390/s17071464 · Cited by 134
Dai, J., Zhao, H., Lin, X., Liu, S., Fei, T., & Zhang, T. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.127270 · Cited by 93
Luo, Y., Pei, Y., Feng, X., Zhang, H., Lu, B., & Wang, L. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126945 · Cited by 62
Leaf Thickness and Electrical Capacitance as Measures of Plant Water Status
Afzal, A., Duiker, S. W., Watson, J. E., et al. (2017) · Transactions of the ASABE · doi:10.13031/trans.12083 · Cited by 48
Cited by
Le, T. D., Phan, H., Kwon, S., Park, S., Jung, Y., Min, J., Chun, B. J., Yoon, H., Ko, S. H., Kim, S., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205158 · Cited by 433
Recent advances in humidity sensors for human body related humidity detection
Duan, Z., Jiang, Y., & Tai, H. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc04180k · Cited by 365
Internet of Things and smart sensors in agriculture: Scopes and challenges
Rajak, P., Ganguly, A., Adhikary, S., & Bhattacharya, S. (2023) · Journal of Agriculture and Food Research · doi:10.1016/j.jafr.2023.100776 · Cited by 355
Multifunctional Flexible Humidity Sensor Systems Towards Noncontact Wearable Electronics
Lu, Y., Yang, G., Shen, Y., Yang, H., & Xu, K. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00895-5 · Cited by 320
Recent Studies on the Humidity Sensor: A Mini Review
Arman Kuzubasoglu, B. (2022) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c00721 · Cited by 278
Metadata
- Authors
- Lan, L., Le, X., Dong, H., Xie, J., Ying, Y., & Ping, J.
- Venue
- Biosensors and Bioelectronics
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 165
- Pages
- 112360
- ISSN
- 0956-5663 (ISSN-L)
- OpenAlex
- W3038511992
- Cited by
- 394
- References
- 17
- FWCI
- 14.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.