Quantitative relationships between microdamage and cancellous bone strength and stiffness
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Microscopic tissue damage (microdamage) is an aspect of bone quality associated with impaired bone mechanical performance. While it is clear that bone tissue submitted to more severe loading has greater amounts of microdamage (as measured through staining), how microdamage influences future mechanical performance of bone has not been well studied, yet is necessary for understanding the mechanical consequences of the presence of microdamage. Here we determine how stained microdamage generated by a single compressive overload affects subsequent biomechanical performance of cancellous bone. Human vertebral cancellous bone specimens (n = 47) from 23 donors (14 male, 9 female, 64–92 years of age) were submitted to a compressive overload, stained for microdamage, then reloaded in compression to determine the relationship between the amount of microdamage caused by the initial load and reductions in mechanical performance during the reload. Damage volume fraction (DV/BV) caused by the initial overload was related to reductions in Young’s modulus, yield strength, ultimate strength, and yield strain upon reloading (p < 0.05, R2 = 0.18–0.34). The regression models suggest that, on average, relatively small amounts of microdamage are associated with large reductions in reload mechanical properties: a 1.50% DV/BV caused by a compressive overload was associated with an average reduction in Young’s modulus of 41.0 ± 3.2 % (mean ± SE), an average reduction in yield strength of 63.1 ± 4.5% and an average reduction in ultimate strength of 52.7 ± 4.0%. Specimens loaded beyond 1.2% (1.2–4.0% apparent strain) demonstrated a single relationship between reload mechanical properties (Young’s modulus, yield strength, and ultimate strength) and bone volume fraction despite a large range in amounts of microdamage. Hence, estimates of future mechanical performance of cancellous bone can be achieved using the bone volume fraction and whether or not a specimen was previously loaded beyond ultimate strain. The empirical relationships provided in this study make it possible to estimate the degree of impaired mechanical performance resulting from an observed amount of stained microdamage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shane, E., Burr, D., Abrahamsen, B., Adler, R. A., Brown, T. D., Cheung, A. M., Cosman, F., Curtis, J. R., Dell, R., Dempster, D. W., et al. (2014) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1998 · Cited by 2,147
Mechanical and morphological effects of strain rate on fatigue of compact bone
Schaffler, M. B., Radin, E. L., & Burr, D. B. (1989) · Bone · doi:10.1016/8756-3282(89)90055-0 · Cited by 338 · cited 1×
“Studies assessing both microdamage and mechanical performance of cancellous bone use one of two approaches: 1) a microdamage stain approach inwhich anoverload is applied and the resulting amount of stained microdamage is determined [4,9–21]; or 2) a continuum mechanics approach in which an overload is applied and dama…”
Trabecular bone microdamage and microstructural stresses under uniaxial compression
Nagaraja, S., Couse, T. L., & Guldberg, R. E. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.05.013 · Cited by 220 · cited 2×
“Studies assessing both microdamage and mechanical performance of cancellous bone use one of two approaches: 1) a microdamage stain approach inwhich anoverload is applied and the resulting amount of stained microdamage is determined [4,9–21]; or 2) a continuum mechanics approach in which an overload is applied and dama…”
Mechanical behavior of human trabecular bone after overloading
Keaveny, T. M., Wachtel, E. F., & Kopperdahl, D. L. (1999) · Journal of Orthopaedic Research · doi:10.1002/jor.1100170308 · Cited by 155 · cited 4×
“The previous study in vertebral cancellous bone [22], however, used a definition of percent reduction in Young’s modulus based on a different portion of the reload curve explaining the larger percent reduction reported.”
InfluentialTang, S. Y., & Vashishth, D. (2007) · Bone · doi:10.1016/j.bone.2006.10.031 · Cited by 59
Fatigue Microdamage in Bovine Trabecular Bone
Moore, T. L. A., & Gibson, L. J. (2003) · Journal of Biomechanical Engineering · doi:10.1115/1.1631584 · Cited by 47
Cited by
Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure
Torres, A. M., Matheny, J. B., Keaveny, T. M., Taylor, D., Rimnac, C. M., & Hernandez, C. J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1520539113 · Cited by 64
Self-citationLambers, F. M., Bouman, A. R., Tkachenko, E. V., Keaveny, T. M., & Hernandez, C. J. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.10.011 · Cited by 36
Self-citationGoff, M. G., Lambers, F. M., Sorna, R. M., Keaveny, T. M., & Hernandez, C. J. (2015) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.10.023 · Cited by 20
“Small amounts of microdamage (occupying less than 2% of the tissue) result in large reductions in stiffness, strength, and fatigue life of cancellous bone (Hernandez et al., 2014; Lambers et al., 2013), highlighting the potential importance of tissue microdamage to clinical fractures.”
BackgroundSelf-citation
Metadata
- Authors
- Hernandez, C. J., Lambers, F. M., Widjaja, J., Chapa, C., & Rimnac, C. M.
- Venue
- Bone
- Publisher
- Elsevier BV
- Published
- 2014-09
- Volume
- 66
- Pages
- 205-213
- ISSN
- 1873-2763 (ISSN-L)
- 8756-3282
- OpenAlex
- W2045604647
- Cited by
- 55
- References
- 6
- FWCI
- 6.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.