The DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
A review on macro-encapsulated phase change material for building envelope applications
Abstract
Abstract Integrating phase change material (PCM) into building envelopes significantly reduces building energy consumption and improves indoor environment. Among different integration techniques, macro-encapsulation allows for an efficient, safe and convenient way of using PCM, and its applications have been widely investigated in recent years. However, this study argues that there is a lack of a systematic analysis regarding the thermal performance of macro-encapsulated PCM, particularly for building envelope applications. Also, a number of important issues have seldom been addressed such as material selection and PCM melting processes at a component level, and optimal locations at a system level. Such a research gap remains a barrier to architects and engineers succeeding at making rational decisions during building design stages, thereby achieving the optimal building performance. This paper aims to provide a comprehensive overview of macro-encapsulated PCM and its integration into building envelopes. The discussion mainly includes: definition and material selection for PCM macro-encapsulation, common macro-encapsulation forms and PCM melting processes within these forms, the optimal locations of systems in building envelopes, and thermal performance enhancement for PCM and shells. In addition, the key issues in future studies are discussed. It is hoped that this comprehensive review will contribute to a deeper understanding of the design and application of macro-encapsulated PCM in building envelopes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Experimental investigation of energy saving in buildings with PCM cold storage
Stritih, U., & Butala, V. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.07.017 · Cited by 116
RetractedAgyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
Solar energy storage using phase change materials☆
KENISARIN, M., & MAHKAMOV, K. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.005 · Cited by 1,376
Review on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Soares, N., Costa, J. J., Gaspar, A. R., & Santos, P. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.12.042 · Cited by 1,061
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809
Thermal stability of phase change materials used in latent heat energy storage systems: A review
Rathod, M. K., & Banerjee, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.022 · Cited by 767
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Microencapsulated PCM thermal-energy storage system
Hawlader, M. N. A., Uddin, M. S., & Khin, M. M. (2003) · Applied Energy · doi:10.1016/s0306-2619(02)00146-0 · Cited by 745
Phase change materials integrated in building walls: A state of the art review
Memon, S. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.042 · Cited by 725
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Du, K., Calautit, J., Wang, Z., Wu, Y., & Liu, H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.005 · Cited by 688
A review on effect of phase change material encapsulation on the thermal performance of a system
Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 657
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Pasupathy, A., Velraj, R., & Seeniraj, R. V. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.010 · Cited by 555
Experimental study of using PCM in brick constructive solutions for passive cooling
Castell, A., Martorell, I., Medrano, M., Pérez, G., & Cabeza, L. F. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2009.10.022 · Cited by 549
Phase change material (PCM) storage for free cooling of buildings—A review
Waqas, A., & Ud Din, Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.034 · Cited by 532
Numerical and experimental study of melting in a spherical shell
Assis, E., Katsman, L. M., Ziskind, G., et al. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.10.007 · Cited by 520
Milián, Y. E., Gutiérrez, A., Grágeda, M., & Ushak, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.159 · Cited by 491
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Self-citationVelraj, R., Seeniraj, R. V., Hafner, B., Faber, C., & Schwarzer, K. (1999) · Solar Energy · doi:10.1016/s0038-092x(98)00128-5 · Cited by 476
Melting in a vertical cylindrical tube: Numerical investigation and comparison with experiments
Shmueli, H., Ziskind, G., & Letan, R. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.05.028 · Cited by 436
Review on using microencapsulated phase change materials (PCM) in building applications
Konuklu, Y., Ostry, M., Paksoy, H. O., & Charvat, P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.07.019 · Cited by 430
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.009 · Cited by 425
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Review on building energy performance improvement using phase change materials
Song, M., Niu, F., Mao, N., Hu, Y., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.066 · Cited by 418
Melting and convection of phase change materials in different shape containers: A review
Dhaidan, N. S., & Khodadadi, J. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.017 · Cited by 388
Phase change materials for limiting temperature rise in building integrated photovoltaics
Huang, M. J., Eames, P., & Norton, B. (2005) · Solar Energy · doi:10.1016/j.solener.2005.10.006 · Cited by 382
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Alva, G., Lin, Y., Liu, L., & Fang, G. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.063 · Cited by 377
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Sustainable thermal energy storage technologies for buildings: A review
Parameshwaran, R., Kalaiselvam, S., Harikrishnan, S., & Elayaperumal, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.058 · Cited by 367
Chandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.070 · Cited by 359
Effect of double layer phase change material in building roof for year round thermal management
Pasupathy, A., & Velraj, R. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.02.016 · Cited by 341
Lee, K. O., Medina, M. A., Raith, E., & Sun, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.003 · Cited by 318
An experimental study of enhanced heat transfer in rectangular PCM thermal storage
Stritih, U. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.001 · Cited by 304
Pasupathy, A., Athanasius, L., Velraj, R., & Seeniraj, R. V. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.04.016 · Cited by 297
Jacob, R., & Bruno, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.038 · Cited by 296
Passive thermal control in residential buildings using phase change materials
Kenisarin, M., & Mahkamov, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.128 · Cited by 296
Hosseini, M. J., Ranjbar, A. A., Sedighi, K., & Rahimi, M. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.07.028 · Cited by 295
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Shilei, L., Neng, Z., & Guohui, F. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.10.006 · Cited by 266
Review on free cooling of buildings using phase change materials
Raj, V. A. A., & Velraj, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.004 · Cited by 265
Kamkari, B., & Groulx, D. (2018) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.04.007 · Cited by 261
Ahmad, M., Bontemps, A., Sallee, H., & Quenard, D. A. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.11.002 · Cited by 254
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
Frusteri, F., Leonardi, V., Vasta, S., & Restuccia, G. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.10.007 · Cited by 242
Silva, T., Vicente, R., Soares, N., & Ferreira, V. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.02.010 · Cited by 239
Constrained and unconstrained melting inside a sphere
Tan, F. L. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.09.008 · Cited by 239
Selection of materials for high temperature latent heat energy storage
Khare, S., Dell’Amico, M., Knight, C., & McGarry, S. A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.020 · Cited by 237
Alam, T. E., Dhau, J. S., Goswami, D. Y., & Stefanakos, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.086 · Cited by 224
Effects of buoyancy-driven convection on melting within spherical containers
Khodadadi, J. M., & Zhang, Y. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00192-7 · Cited by 224
Brick masonry walls with PCM macrocapsules: An experimental approach
Vicente, R., & Silva, T. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.02.069 · Cited by 220
Thermal performance of PCM thermal storage unit for a roof integrated solar heating system
Saman, W. Y., Bruno, F., & Halawa, E. (2004) · Solar Energy · doi:10.1016/j.solener.2004.08.017 · Cited by 219
PCM-mortar based construction materials for energy efficient buildings: A review on research trends
Rao, V. V., Parameshwaran, R., & Ram, V. V. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.098 · Cited by 219
On the importance of the location of PCMs in building walls for enhanced thermal performance
Jin, X., Medina, M. A., & Zhang, X. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.079 · Cited by 216
Critical review of latent heat storage systems for free cooling in buildings
Zeinelabdein, R., Omer, S., & Gan, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.046 · Cited by 216
A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material
Bose, P., & Amirtham, V. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.071 · Cited by 211
Kong, X., Lu, S., Li, Y., Huang, J., & Liu, S. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.06.044 · Cited by 209
Zhou, G., & He, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.10.058 · Cited by 207
Tao, Y. B., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.008 · Cited by 199
Thermal analysis of a double layer phase change material floor
Jin, X., & Zhang, X. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.01.023 · Cited by 197
Shi, X., Memon, S. A., Tang, W., Cui, H., & Xing, F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.001 · Cited by 195
Free cooling of a building using PCM heat storage integrated into the ventilation system
Arkar, C., & Medved, S. (2007) · Solar Energy · doi:10.1016/j.solener.2007.01.010 · Cited by 191
Numerical study of PCM solidification in a finned tube thermal storage including natural convection
Jmal, I., & Baccar, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.065 · Cited by 188
PCM-facade-panel for daylighting and room heating
Weinläder, H., Beck, A., & Fricke, J. (2004) · Solar Energy · doi:10.1016/j.solener.2004.04.013 · Cited by 176
High thermal conductivity phase change composite with percolating carbon fiber network
Nomura, T., Tabuchi, K., Zhu, C., Sheng, N., Wang, S., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.042 · Cited by 175
Nagano, K., Takeda, S., Mochida, T., Shimakura, K., & Nakamura, T. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.07.010 · Cited by 175
Zhong, Y., Li, S., Wei, X., Liu, Z., Guo, Q., Shi, J., & Liu, L. (2010) · Carbon · doi:10.1016/j.carbon.2009.09.033 · Cited by 170
Self-citationThermal conductivity improvement of phase change materials/graphite foam composites
Moeini Sedeh, M., & Khodadadi, J. M. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.004 · Cited by 167
Method to improve geometry for heat transfer enhancement in PCM composite heat sinks
Akhilesh, R., Narasimhan, A., & Balaji, C. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.01.032 · Cited by 167
Zwanzig, S. D., Lian, Y., & Brehob, E. G. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.02.003 · Cited by 166
Review on the methodology used in thermal stability characterization of phase change materials
Ferrer, G., Solé, A., Barreneche, C., Martorell, I., & Cabeza, L. F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.187 · Cited by 160
Wahid, M. B. A., Hosseini, S. E., Hussen, H. M., Akeiber, H. J., Saud, S. N., & Mohammad, A. T. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.032 · Cited by 157
Rastogi, M., Chauhan, A., Vaish, R., & Kishan, A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.077 · Cited by 155
Field thermal performance of naturally ventilated solar roof with PCM heat sink
Kośny, J., Biswas, K., Miller, W. A., & Kriner, S. (2012) · Solar Energy · doi:10.1016/j.solener.2012.05.020 · Cited by 152
Arkar, C., Vidrih, B., & Medved, S. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2006.03.009 · Cited by 150
Liu, Z., Sun, X., & Ma, C. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.012 · Cited by 149
Self-citationMEDINA, M., KING, J., & Zhang, M. (2008) · Energy · doi:10.1016/j.energy.2007.11.003 · Cited by 145
Zhang, M., Medina, M. A., & King, J. B. (2005) · International Journal of Energy Research · doi:10.1002/er.1082 · Cited by 143
Experimental study of a phase change thermal energy storage with copper foam
Martinelli, M., Bentivoglio, F., Caron-Soupart, A., Couturier, R., Fourmigué, J.-F., & Marty, P. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.095 · Cited by 143
Sarı, A., Biçer, A., Al‐Ahmed, A., Al‐Sulaiman, F. A., Zahir, M. H., & Mohamed, S. A. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.12.036 · Cited by 143
Using phase change materials in window shutter to reduce the solar heat gain
Alawadhi, E. M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.12.009 · Cited by 141
Unconstrained melting inside a sphere
Hosseinizadeh, S. F., Darzi, A. A. R., Tan, F. L., & Khodadadi, J. M. (2012) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2012.07.012 · Cited by 137
Realization, test and modelling of honeycomb wallboards containing a Phase Change Material
Hasse, C., Grenet, M., Bontemps, A., Dendievel, R., & Sallee, H. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.09.017 · Cited by 135
Experimental investigation of PCM cold storage
Butala, V., & Stritih, U. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2008.10.008 · Cited by 134
Huang, K., Feng, G., & Zhang, J. “. (2014) · Solar Energy · doi:10.1016/j.solener.2014.03.009 · Cited by 130
Shin, H. K., Park, M., Kim, H. Y., & Park, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.035 · Cited by 130
Biswas, K., & Abhari, R. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.003 · Cited by 128
Jiang, Z., Ouyang, T., Yang, Y., Chen, L., Fan, X., Chen, Y., Li, W., & Fei, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.052 · Cited by 127
Jin, X., Medina, M. A., & Zhang, X. (2014) · Energy · doi:10.1016/j.energy.2014.06.079 · Cited by 121
Dannemand, M., Johansen, J. B., & Furbo, S. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.10.038 · Cited by 121
Gong, Z., Devahastin, S., & MUJUMDAR, A. S. (1999) · Applied Thermal Engineering · doi:10.1016/s1359-4311(99)00003-4 · Cited by 120
Thermal analysis of a ventilated facade with PCM for cooling applications
de Gracia, Á., Navarro, L., Castell, A., Ruiz–Pardo, Á., Domínguez, S. Á., & Cabeza, L. F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.06.032 · Cited by 119
Cabeza, L. F., Illa, J., Roca, J., Badía, F., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · Materials and Corrosion · doi:10.1002/1521-4176(200110)52:10<748::aid-maco748>3.0.co;2-s · Cited by 118
Gunasekara, S. N., Martin, V., & Chiu, J. N. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.108 · Cited by 117
Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls
Carbonari, A., Grassi, M. D., Perna, C. D., & Principi, P. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.08.007 · Cited by 115
Hamada, Y., Ohtsu, W., & Fukai, J. (2003) · Solar Energy · doi:10.1016/j.solener.2003.07.028 · Cited by 113
Alizadeh, M., & Sadrameli, S. M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.168 · Cited by 112
Liu, L.-K., Alva, G., Huang, X., & Fang, G.-Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.08.035 · Cited by 110
Xia, Y. P., & Zhang, X. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.133 · Cited by 104
Silva, T., Vicente, R., Rodrigues, F., Samagaio, A., & Cardoso, C. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.053 · Cited by 103
Experimental research on a novel energy efficiency roof coupled with PCM and cool materials
Lu, S., Chen, Y., Liu, S., & Kong, X. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.080 · Cited by 94
Silva, T., Vicente, R., Rodrigues, F., Samagaio, A., & Cardoso, C. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.059 · Cited by 93
Lu, W. J., Liu, Z., Flor, J.-F., Wu, Y., & Yang, M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.030 · Cited by 91
Self-citationCabeza, L. F., Alibés, J. I. I., Enrich, J. R., Pascual, F. B., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · RECERCAT (Consorci de Serveis Universitaris de Catalunya) · Cited by 91
Cabeza, L. F., Roca, J., Nogués, M., Mehling, H., & Hiebler, S. (2002) · Materials and Corrosion · doi:10.1002/maco.200290004 · Cited by 91
PCM Selection Using AHP Method to Maintain Thermal Comfort of the Vehicle Occupants
Socaciu, L., Giurgiu, O., Banyai, D., & Simion, M. (2016) · Energy Procedia · doi:10.1016/j.egypro.2015.12.232 · Cited by 90
Berthou, Y., Biwolé, P. H., Achard, P., Sallee, H., Tantot-Neirac, M., & Jay, F. (2015) · Solar Energy · doi:10.1016/j.solener.2015.03.038 · Cited by 85
Designing building envelope with PCM wallboards: Design tool development
Bastani, A., Haghighat, F., & Koziński, J. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.031 · Cited by 80
Self-citationVentilated active façades with PCM
Diarce, G., Urresti, A., García-Romero, A., Delgado, A., Erkoreka, A., Escudero, C., & Campos‐Celador, Á. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.032 · Cited by 78
Monitoring results of an interior sun protection system with integrated latent heat storage
Weinläder, H., Koerner, W., & Heidenfelder, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.06.007 · Cited by 74
New database to select phase change materials: Chemical nature, properties, and applications
Barreneche, C., Navarro, M. E., Cabeza, L. F., & Fernández, A. I. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.08.003 · Cited by 73
Diaconu, B. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.08.019 · Cited by 73
An experimental study on the thermal performance of a solar chimney without and with PCM
Liu, S., & Li, Y. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.03.054 · Cited by 72
Soares, N., Gaspar, A. R., Santos, P., & Costa, J. J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.01.003 · Cited by 71
Serrano, Á., Borreguero, A. M., Garrido, I., Rodríguez, J. F., & Carmona, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.098 · Cited by 69
A ventilated cooling ceiling with integrated latent heat storage—Monitoring results
Weinläder, H., Körner, W., & Strieder, B. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.013 · Cited by 68
Li, Z., Wu, Y., Zhuang, B., Zhao, X., Tang, Y. Z., Ding, X., & Chen, K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.046 · Cited by 67
Fabrication and analysis of small-scale thermal energy storage with conductivity enhancement
Thapa, S., Chukwu, S., Khaliq, A., & Weiss, L. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.019 · Cited by 66
Properties evaluation and applications of thermal energystorage materials in buildings
Cao, L., Su, D., Tang, Y., Fang, G., & Tang, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.041 · Cited by 66
Li, W., Wang, Y., & Kong, C.-C. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.09.004 · Cited by 65
Panchabikesan, K., Vincent, A. A. R., Ding, Y., & Velraj, R. (2017) · Energy · doi:10.1016/j.energy.2017.11.117 · Cited by 62
Soares, N., Gaspar, A. R., Santos, P., & Costa, J. J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.034 · Cited by 60
Qarnia, H. E., Draoui, A., & Lakhal, E. K. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2012.08.021 · Cited by 58
Goia, F. (2012) · Frontiers of Architectural Research · doi:10.1016/j.foar.2012.10.002 · Cited by 58
Lee, K. O., Medina, M. A., & Sun, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.10.020 · Cited by 55
Possibilities for characterization of a PCM window system using large scale measurements
Grynning, S., Goia, F., Rognvik, E., & Time, B. (2013) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.09.003 · Cited by 52
Storage composites for the optimisation of solar water heating systems
Haillot, D., Py, X., Goetz, V., & Benabdelkarim, M. (2008) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2008.01.007 · Cited by 38
Numerical modeling of thermal behaviors of active multi-layer living wall
Mankibi, M. E., Zhai, Z. J., Al-Saadi, S. N., & Zoubir, A. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.084 · Cited by 36
Review of the use of phase change materials (PCMs) in buildings with reinforced concrete structures
Pons, O., Aguado, A., Fernández, A. I., Cabeza, L. F., & Chimenos, J. M. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.05613 · Cited by 31
A review on house design with energy saving system in the UK
Xie, Y. Q., Gilmour, M. S., Yuan, Y., Jin, H., & Wu, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.004 · Cited by 27
Moulahi, C., Trigui, A., Karkri, M., & Boudaya, C. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.04.011 · Cited by 20
Lv, Y., Zhou, W., Yang, Z., & Jin, W. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.058 · Cited by 16
Cited by
Al-Yasiri, Q., & Szabó, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102122 · Cited by 432
Flexible phase change materials for thermal energy storage
Shi, J., Qin, M., Aftab, W., & Zou, R. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.048 · Cited by 309
Synthesis of organic phase change materials (PCM) for energy storage applications: A review
Magendran, S. S., Khan, F. S. A., Mubarak, N. M., Vaka, M., Walvekar, R., Khalid, M., Abdullah, E. C., Nizamuddin, S., & Karri, R. R. (2019) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2019.100399 · Cited by 297
Yu, K., Liu, Y., & Yang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116845 · Cited by 278
Phase change materials integrated into building walls: An updated review
Lamrani, B., Johannes, K., & Kuznik, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110751 · Cited by 274
Metadata
- Authors
- Liu, Z., Yu, Z. (., Yang, T., Qin, D., Li, S., Zhang, G., Haghighat, F., & Joybari, M. M.
- Venue
- Building and Environment
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 144
- Pages
- 281-294
- ISSN
- 0360-1323 (ISSN-L)
- OpenAlex
- W2888567899
- Cited by
- 322
- References
- 147
- FWCI
- 18.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.