Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes
Open accessThe DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
Abstract Carbon nanotubes (CNTs) are attractive candidates as nanofillers in reinforcing ordinary Portland cement (OPC) due to their superior mechanical properties. In this study, the engineering properties of CNT–OPC pastes were investigated with varied ultrasonication energy (UE) and CNT concentration. It was found that UE could effectively improve the aqueous dispersion of surface functionalized CNTs with the aid of a polycarboxylate-based cement admixture (PC). A PC to CNTs mass ratio of 8 is recommended for ensuring effective dispersion of CNTs and maintaining workability of CNT–OPC pastes under sufficient ultrasonication. Furthermore, the mechanical property results of the hardened pastes obtained from pre-notched beam tests revealed the existence of an optimal UE for achieving mechanically superior CNT–OPC pastes, which was found to be 50 J/mL per unit CNTs to suspensions weight ratio. The Young’s modulus E , flexural strength σ f , and fracture energy G F of CNT–OPC pastes were significantly improved compared to plain OPC pastes. These results clearly demonstrate the reinforcing effect of CNTs on cement pastes because they decrease the porosity and increase crack bridging capacity of cement pastes at nanoscale level, which will be complementary to conventional microfibers in reinforcing OPC pastes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Highly dispersed carbon nanotube reinforced cement based materials
Konsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.015 · Cited by 1,002
(1985) · Materials and Structures · doi:10.1007/bf02472918 · Cited by 999
Li, G. Y., Wang, P. M., & Zhao, X. (2005) · Carbon · doi:10.1016/j.carbon.2004.12.017 · Cited by 954
Nano reinforced cement and concrete composites and new perspective from graphene oxide
Chuah, S., Pan, Z., Sanjayan, J. G., Wang, C. M., & Duan, W. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.040 · Cited by 742
Self-citationControlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution
Yu, J., Grossiord, N., Koning, C. E., & Loos, J. (2007) · Carbon · doi:10.1016/j.carbon.2006.10.010 · Cited by 727
The theoretical basis of a method to determine the fracture energyG F of concrete
Hillerborg, A. (1985) · Materials and Structures · doi:10.1007/bf02472919 · Cited by 692
Konsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683
Mechanical damage of carbon nanotubes by ultrasound
Lu, K. L., Lago, R. M., Chen, Y. K., Green, M. L. H., Harris, P. J. F., & Tsang, S. C. E. (1996) · Carbon · doi:10.1016/0008-6223(96)89470-x · Cited by 679
Dispersion of Carbon Nanotubes in Liquids
Hilding, J., Grulke, E. A., George Zhang, Z., & Lockwood, F. (2003) · Journal of Dispersion Science and Technology · doi:10.1081/dis-120017941 · Cited by 668
Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer
Yamada, K., Takahashi, T., Hanehara, S., & Matsuhisa, M. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00230-6 · Cited by 662
Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites
Li, G. Y., Wang, P., & Zhao, X. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.011 · Cited by 545
Winnefeld, F., Becker, S., Pakusch, J., & Götz, T. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.006 · Cited by 509
Nochaiya, T., & Chaipanich, A. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.09.030 · Cited by 376
Tyson, B. M., Abu Al-Rub, R. K., Yazdanbakhsh, A., & Grasley, Z. (2011) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000266 · Cited by 341
CARBON NANOTUBE/CEMENT COMPOSITES - EARLY RESULTS AND POTENTIAL APPLICATIONS
Makar, J. M., Margeson, J., & Luh, J. (2005) · NPARC · Cited by 340
Carbon nanotubes: biomaterial applications
Saito, N., Usui, Y., Aoki, K., Narita, N., Shimizu, M., Hara, K., Ogiwara, N., Nakamura, K., Ishigaki, N., Kato, H., et al. (2009) · Chemical Society Reviews · doi:10.1039/b804822n · Cited by 267
Puertas, F., Santos, H., Palacios, M., & Mart�nez-Ram�rez, S. (2005) · Advances in Cement Research · doi:10.1680/adcr.17.2.77.65044 · Cited by 265
Krause, B., Mende, M., Pötschke, P., & Petzold, G. (2010) · Carbon · doi:10.1016/j.carbon.2010.04.002 · Cited by 260
Kendall, K., Howard, A. J., & Birchall, J. D. (1983) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1983.0073 · Cited by 236
Uchikawa, H., Sawaki, D., & Hanehara, S. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00021-6 · Cited by 214
Dispersion of carbon nanotubes with SDS surfactants: a study from a binding energy perspective
Duan, W. H., Wang, Q., & Collins, F. (2011) · Chemical Science · doi:10.1039/c0sc00616e · Cited by 201
Self-citationZhan, G., & Mukherjee, A. K. (2004) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2004.tb00166.x · Cited by 182
Abu Al-Rub, R. K., Tyson, B. M., Yazdanbakhsh, A., & Grasley, Z. (2012) · Journal of Nanomechanics and Micromechanics · doi:10.1061/(asce)nm.2153-5477.0000041 · Cited by 170
Applications of Carbon Nanotubes-Based Biomaterials in Biomedical Nanotechnology
Polizu, S., Savadogo, O., Poulin, P., & Yahia, L. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.197 · Cited by 167
Carbon nanotube–cement composites: A retrospect
Chen, S. J., Collins, F. G., Macleod, A. J. N., Pan, Z., Duan, W. H., & Wang, C. M. (2011) · The IES Journal Part A: Civil & Structural Engineering · doi:10.1080/19373260.2011.615474 · Cited by 158
Self-citationEarly Age Strength and Workability of Slag Pastes Activated by NaOH and Na2CO3
Collins, F., & Sanjayan, J. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00025-8 · Cited by 156
Self-citationCarbon nanotube reinforced ceramics
Hwang, G. L., & Hwang, K. C. (2001) · Journal of Materials Chemistry · doi:10.1039/b101294k · Cited by 106
Predicting the influence of ultrasonication energy on the reinforcing efficiency of carbon nanotubes
Chen, S.-J., Zou, B., Collins, F., Zhao, X. L., Majumber, M., & Duan, W. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.023 · Cited by 105
Self-citationBlanch, A. J., Lenehan, C. E., & Quinton, J. S. (2011) · Carbon · doi:10.1016/j.carbon.2011.07.039 · Cited by 92
Metaxa, Z. S., Konsta-Gdoutos, M. S., & Shah, S. P. (2010) · doi:10.14359/51663743 · Cited by 64
Cited by
Li, X., Liu, Y. M., Li, W. G., Li, C. Y., Sanjayan, J. G., Duan, W. H., & Li, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.058 · Cited by 404
Self-citationJung, M., Lee, Y.-S., Hong, S.-G., & Moon, J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106017 · Cited by 348
Effects of graphene oxide on early-age hydration and electrical resistivity of Portland cement paste
Li, W., Li, X., Chen, S. J., Liu, Y. M., Duan, W. H., & Shah, S. P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.066 · Cited by 328
Self-citationGao, Y., Jing, H. W., Chen, S. J., Du, M. R., Chen, W. Q., & Duan, W. H. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.066 · Cited by 204
Self-citationMendoza Reales, O. A., & Dias Toledo Filho, R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.232 · Cited by 195
Metadata
- Authors
- Zou, B., Chen, S. J., Korayem, A. H., Collins, F., Wang, C. M., & Duan, W. H.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2015-04
- Volume
- 85
- Pages
- 212-220
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2072698781
- Cited by
- 311
- References
- 33
- FWCI
- 32.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.