The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies
Abstract
Abstract Recently restricted greenhouse gas emission regulations for commercial vehicles have initiated a significant interest of an automotive industry in carbon fibers (CFs), which are excellent lightweight structural materials. However, the high production cost of CFs has limited their use in a selected number of applications including military, aircraft, and aerospace industries. Therefore, to satisfy a huge demand from the automotive industry and to translate an exotic technology into commercial applications, tremendous research efforts have focused on developing low-cost CFs. As the precursor cost takes more than 50% of an entire cost for CFs production, adopting low-cost precursors for CFs have been utilized as one of the main strategies. In this article, we review series of previous achievements which incorporated low-cost precursors into CFs fabrication including novel acrylic polymers, polyethylene (PE), lignin, and pitch. Furthermore, looking toward the future, prospective processing technologies which might be beneficial for reducing manufacturing cost of CFs are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Atmospheric pressure plasmas: A review
Tendero, C., Tixier, C., Tristant, P., Desmaison, J., & Leprince, P. (2006) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2005.10.003 · Cited by 1,553
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,200
The Radiation Chemistry of Macromolecules
(1973) · Elsevier eBooks · doi:10.1016/c2013-0-10595-8 · Cited by 1,096
Carbon Fibers: Precursor Systems, Processing, Structure, and Properties
Frank, E., Steudle, L. M., Ingildeev, D., Spörl, J. M., & Buchmeiser, M. R. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306129 · Cited by 970
Fabrication and Properties of Carbon Fibers
Huang, X. (2009) · Materials · doi:10.3390/ma2042369 · Cited by 969
Carbon fiber reinforced plastics in aircraft construction
Soutis, C. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.08.064 · Cited by 876
Lignin-based carbon fibers for composite fiber applications
Kadla, J. F., Kubo, S., Venditti, R. A., Gilbert, R. D., Compere, A. L., & Griffith, W. (2002) · Carbon · doi:10.1016/s0008-6223(02)00248-8 · Cited by 770
On the structure of softwood kraft lignin
Crestini, C., Lange, H., Sette, M., & Argyropoulos, D. S. (2017) · Green Chemistry · doi:10.1039/c7gc01812f · Cited by 540
Non-Thermal Atmospheric-Pressure Plasma Possible Application in Wound Healing
Haertel, B., Woedtke, T. V., Weltmann, K.-D., & Lindequist, U. (2014) · Biomolecules & Therapeutics · doi:10.4062/biomolther.2014.105 · Cited by 433
Ion-beam modification of polymeric materials – fundamental principles and applications
Lee, E. H. (1999) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(99)00129-9 · Cited by 407
Lignin-based Carbon Fibers: Effect of Synthetic Polymer Blending on Fiber Properties
Kubo, S., & Kadla, J. F. (2005) · Journal of Polymers and the Environment · doi:10.1007/s10924-005-2941-0 · Cited by 382
Surface Treatment of Carbon Fibers - A Review
Tiwari, S., & Bijwe, J. (2014) · Procedia Technology · doi:10.1016/j.protcy.2014.08.064 · Cited by 348
Elucidation of Lignin Structure by Quantitative 2D NMR
Sette, M., Wechselberger, R., & Crestini, C. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201003045 · Cited by 336
(1978) · Composites · doi:10.1016/0010-4361(78)90646-8 · Cited by 333
(1991) · ACS Symposium Series · doi:10.1021/bk-1991-0475 · Cited by 317
Fang, W., Yang, S., Wang, X.-L., Yuan, T.-Q., & Sun, R.-C. (2017) · Green Chemistry · doi:10.1039/c6gc03206k · Cited by 301
Lignin-based carbon fibers: Oxidative thermostabilization of kraft lignin
Braun, J. L., Holtman, K. M., & Kadla, J. F. (2005) · Carbon · doi:10.1016/j.carbon.2004.09.027 · Cited by 295
Curing of composite components by ultraviolet radiation: A review
Endruweit, A., Johnson, M. S., & Long, A. C. (2006) · Polymer Composites · doi:10.1002/pc.20166 · Cited by 276
Structure-property relationships in carbon fibres
Johnson, D. J. (1987) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/20/3/007 · Cited by 232
Fibre reinforcements for composite materials
Bunsell, A. R. (1988) · Elsevier eBooks · Cited by 207
Influence of boron on carbon fiber microstructure, physical properties, and oxidation behavior
Jones, L. E., & Thrower, P. A. (1991) · Carbon · doi:10.1016/0008-6223(91)90076-u · Cited by 206
A new method for stabilizing softwood kraft lignin fibers for carbon fiber production
Norberg, I., Nordström, Y., Drougge, R., Gellerstedt, G., & Sjöholm, E. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38588 · Cited by 194
Carbon fibers from dry-spinning of acetylated softwood kraft lignin
Zhang, M., & Ogale, A. A. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.015 · Cited by 178
Preparation of Carbon Fibers from Organosolv Lignin Obtained by Aqueous Acetic Acid Pulping
Uraki, Y., Kubo, S., Nigo, N., Sano, Y., & Sasaya, T. (1995) · hfsg · doi:10.1515/hfsg.1995.49.4.343 · Cited by 165
Recent advances in carbon fibers derived from biobased precursors
Ogale, A. A., Zhang, M., & Jin, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43794 · Cited by 155
Radiation effects in polyethylene and n-alkanes
Ungar, G. (1981) · Journal of Materials Science · doi:10.1007/bf00552946 · Cited by 144
Chemical structure of residual lignin from kraft pulp
Froass, P. M., Ragauskas, A. J., & Jiang, J.-E. (1996) · Journal of Wood Chemistry and Technology · doi:10.1080/02773819608545820 · Cited by 129
A new softening agent for melt spinning of softwood kraft lignin
Nordström, Y., Norberg, I., Sjöholm, E., & Drougge, R. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38795 · Cited by 129
A new modification method of exploded lignin for the preparation of a carbon fiber precursor
Sudo, K., Shimizu, K., Nakashima, N., et al. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070480817 · Cited by 126
Precursors and Manufacturing of Carbon Fibers
Park, S., & Heo, G. (2014) · Springer series in materials science · doi:10.1007/978-94-017-9478-7_2 · Cited by 124
Tissue Optics and Photonics: Biological Tissue Structures
Tuchin, V. V. (2015) · Journal of Biomedical Photonics & Engineering · doi:10.18287/jbpe-2015-1-1-3 · Cited by 112
Choi, D., Jang, D., Joh, H., Reichmanis, E., & Lee, S. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03737 · Cited by 103
Self-citationPatterned Functional Carbon Fibers from Polyethylene
Hunt, M. A., Saito, T., Brown, R. H., Kumbhar, A. S., & Naskar, A. K. (2012) · Advanced Materials · doi:10.1002/adma.201104551 · Cited by 93
Irradiation of Polymeric Materials: Processes, Mechanisms, and Applications
Reichmanis, E., Frank, C. W., & O’Donnell, J. H. (1993) · ACS symposium series · doi:10.1021/bk-1993-0527 · Cited by 86
Pyrolysis Pathways of Sulfonated Polyethylene, an Alternative Carbon Fiber Precursor
Younker, J. M., Saito, T., Hunt, M. A., Naskar, A. K., & Beste, A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3121845 · Cited by 86
Amorphous carbon fibres from linear low density polyethylene
Postema, A. R., de Groot, H., & Pennings, A. J. (1990) · Journal of Materials Science · doi:10.1007/bf00581075 · Cited by 75
Preparation of carbon fibers from linear low density polyethylene
Kim, J. W., & Lee, J. S. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.074 · Cited by 74
Energy Science: Principles, Technologies, and Impacts
Andrews, J., & Jelley, N. A. (2007) · Cited by 69
Yoo, S. H., Park, S., Park, Y., Lee, D., Joh, H., Shin, I.-G., & Lee, S. (2017) · Carbon · doi:10.1016/j.carbon.2017.03.039 · Cited by 63
Self-citationHigh‐Modulus Low‐Cost Carbon Fibers from Polyethylene Enabled by Boron Catalyzed Graphitization
Barton, B. E., Behr, M. J., Patton, J. T., Hukkanen, E. J., Landes, B. G., Wang, W., Horstman, N., Rix, J. E., Keane, D. T., Weigand, S. L., et al. (2017) · Small · doi:10.1002/smll.201701926 · Cited by 63
Carbon Fibers from UV-Assisted Stabilization of Lignin-Based Precursors
Zhang, M., Jin, J., & Ogale, A. A. (2015) · Fibers · doi:10.3390/fib3020184 · Cited by 61
Structure-property model for polyethylene-derived carbon fiber
Behr, M. J., Landes, B. G., Barton, B. E., Bernius, M. T., Billovits, G. F., Hukkanen, E. J., Patton, J. T., Wang, W., Wood, C., Keane, D. T., et al. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.032 · Cited by 60
Bouvier, J., Gelus, M., & Maugendre, S. (1988) · Applied Energy · doi:10.1016/0306-2619(88)90006-2 · Cited by 58
The chemical transformation of hydrocarbons to carbon using SO3 sources
Barton, B. E., Patton, J. T., Hukkanen, E. J., Behr, M. J., Lin, J.-C., Beyer, S., Zhang, Y., Brehm, L. L., Haskins, B., Bell, B. M., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.07.029 · Cited by 53
Zhang, D., & Sun, Q. H. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961010)62:2<367::aid-app11>3.0.co;2-z · Cited by 51
Zenkiewicz, M., Rauchfleisz, M., & CZUPRYNSKA, J. (2003) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(03)00368-2 · Cited by 49
Effects of stabilization variables on mechanical properties of isotropic pitch based carbon fibers
Kil, H.-S., Jang, S. Y., Ko, S., Jeon, Y. P., Kim, H.-C., Joh, H., & Lee, S. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.09.048 · Cited by 47
Self-citationPenning, J. P., Lagcher, R., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316913 · Cited by 42
Ammoxidation of polyethylene: A new route to carbon
Barton, B. E., Hukkanen, E. J., Billovits, G. F., Schlader, D. R., Behr, M. J., Yancey, D. F., Rickard, M. A., Qiu, X., Mowery, D. M., Brehm, L. L., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.031 · Cited by 16
The Impact of CAFE Standards on Innovation in the US Automobile IndustryPreprint
Bento, A. M., Roth, K., & Wang, Y. (2015) · RePEc: Research Papers in Economics · doi:10.22004/ag.econ.206195 · Cited by 8
Cited by
Past, present and future prospective of global carbon fibre composite developments and applications
Zhang, J., Lin, G., Vaidya, U., & Wang, H. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.110463 · Cited by 1,026
Current advancement on the isolation, characterization and application of lignin
Liao, J. J., Latif, N. H. A., Trache, D., Brosse, N., & Hussin, M. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.168 · Cited by 425
Functional Fiber Materials to Smart Fiber Devices
Chen, C., Feng, J., Li, J., Guo, Y., Shi, X., & Peng, H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00192 · Cited by 308
Carbonization: A feasible route for reutilization of plastic wastes
Chen, S., Liu, Z., Jiang, S., & Hou, H. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.136250 · Cited by 213
Additive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Metadata
- Authors
- Choi, D., Kil, H.-S., & Lee, S.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 142
- Pages
- 610-649
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2898311901
- Cited by
- 300
- References
- 52
- FWCI
- 13.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.