Flexible and robust laser-induced graphene heaters photothermally scribed on bare polyimide substrates
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
We demonstrate the feasibility of fabricating cost-effective and robust laser-induced graphene (LIG) flexible heaters with an innovative technique based on the photothermal production of graphene with a foam-like morphology. The produced devices are precisely defined on a bare polyimide substrate without the need of photomasks by employing a computer numerical control (CNC) driven laser diode. The electrical properties of the LIG-based heaters can be tailored by adjusting the laser power. The resulting conductive material exhibits electrical and chemical properties which are similar to the ones for graphene such as a negative temperature coefficient of −0.46 m°C−1 and a maximum operating temperature of around 400 °C. The developed heaters can outperform the existing emerging technologies showing a very rapid and stable response up to 225 °C with the extra features of flexibility, biocompatibility, and environmental friendliness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
High-performance graphene-based flexible heater for wearable applications
Lin, S.-Y., Zhang, T.-Y., Lu, Q., Wang, D.-Y., Yang, Y., Wu, X.-M., & Ren, T.-L. (2017) · RSC Advances · doi:10.1039/c7ra03181e · Cited by 117
Tamayol, A., Hassani Najafabadi, A., Mostafalu, P., Yetisen, A. K., Commotto, M., Aldhahri, M., Abdel-wahab, M. S., Najafabadi, Z. I., Latifi, S., Akbari, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-04749-8 · Cited by 115
Metadata
- Authors
- Bobinger, M. R., Romero, F. J., Salinas-Castillo, A., Becherer, M., Lugli, P., Morales, D. P., Rodríguez, N., & Rivadeneyra, A.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 144
- Pages
- 116-126
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2904671843
- Cited by
- 193
- References
- 6
- FWCI
- 6.60
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.