The DOI matches its Crossref record.
PBAT/thermoplastic starch blends: Effect of compatibilizers on the rheological, mechanical and morphological properties
Abstract
The effect of maleic anhydride (MA), citric acid (CA) and maleated poly(butylene adipate-Co-terephthalate) PBAT (PBATg-MA), as compatibilizer, on properties of blends of plasticized starch/PBAT in a weight ratio of 60/40 were investigated using rheological measurements, tensile tests, SEM observations and mechanical dynamic analyses. A strong evolution in the mechanical, morphological and rheological properties of the blend was observed according to the type of additives used. The type of compatibilizer was shown to control the morphology and continuity development of the TPS/PBAT 60/40 wt% blend. In the absence of the compatibilizer and in presence of PBATg-MA, the PBAT was the continuous phase, while the TPS became the continuous one in presence of MA and CA. These evolutions were explained by the change in the melt rheological properties of TPS in the presence of the compatibilizer and its aptitude to promote interfacial adhesion between TPS and PBAT phases. A huge evolution in the tensile strength and strain at break were also observed according to the structure of the compatibilizer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advances in Bioplastics: Application and Biodegradation
Narancic, T., Cerrone, F., Beagan, N., & O’Connor, K. E. (2020) · Polymers · doi:10.3390/polym12040920 · Cited by 421
Dammak, M., Fourati, Y., Tarrés, Q., Delgado-Aguilar, M., Mutjé, P., & Boufi, S. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.112061 · Cited by 297
Self-citationAversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Lackner, M., Ivanič, F., Kováčová, M., & Chodák, I. (2021) · International Journal of Biobased Plastics · doi:10.1080/24759651.2021.1882774 · Cited by 46
Gao, S., McClements, D. J., Wang, B., Rashid, A., Geng, X., Sun, S., Wang, W., & Hou, H. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c07433 · Cited by 24
Metadata
- Authors
- Fourati, Y., Tarrés, Q., Mutjé, P., & Boufi, S.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 199
- Pages
- 51-57
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2821966804
- Cited by
- 201
- References
- 0
- FWCI
- 4.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: PBAT/thermoplastic starch blends: Effect of compatibilizers on the rheological, mechanical and morphological properties. https://app.cochat.ai/papers/10.1016/j.carbpol.2018.07.008
- The paper
- Fourati, Y., Tarrés, Q., Mutjé, P., & Boufi, S. (2018). PBAT/thermoplastic starch blends: Effect of compatibilizers on the rheological, mechanical and morphological properties. Carbohydrate Polymers. https://doi.org/10.1016/j.carbpol.2018.07.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.