The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability
Abstract
Abstract Poly(butylene adipate-Co-terephthalate) (PBAT) is a completely biodegradable aliphatic-aromatic copolyester with competitive mechanical properties in comparison to commodity plastic, although it is about three times more expensive than low-density polyethylene (LDPE). The blending of PBAT with plasticized starch is an effective way to develop more accessible PBAT-based bioplastics for wide application in packaging, but the addition of an appropriate compatibilizer is recommended. Here, we investigate the effect of maleated PBAT (PBATg-MA) and maleic anhydride (MA) coupling agents, on the mechanical properties, morphology, melt rheology and biodegradability of PBAT/TPS blends. It was found that PBATg-MA is an effective reactive compatibilizer promoting the interfacial adhesion between TPS and PBAT phases with a beneficial effect on the tensile strength as well as the elongation at break. The morphology and continuity index change considerably according to the compatibilizer. The biodegradation kinetics was also affected by the presence of compatibilizers, with a decrease in the degradation rate noted when PBATg-MA was used as compatibilizer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vroman, I., & Tighzert, L. (2009) · Materials · doi:10.3390/ma2020307 · Cited by 1,355
Ferreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443
Thermoplastic starches: Properties, challenges, and prospects
Mohammadi Nafchi, A., Moradpour, M., Saeidi, M., & Alias, A. K. (2013) · Starch - Stärke · doi:10.1002/star.201200201 · Cited by 433
Biodegradable compatibilized polymer blends for packaging applications: A literature review
Muthuraj, R., Misra, M., & Mohanty, A. K. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45726 · Cited by 391
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Characterization and degradation behavior of poly(butylene adipate‐co‐terephthalate)s
Herrera, R., Franco, L., Rodríguez‐Galán, A., & Puiggalí, J. (2002) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10501 · Cited by 250
Fourati, Y., Tarrés, Q., Mutjé, P., & Boufi, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.008 · Cited by 201
Self-citationStarch‐based biodegradable blends: morphology and interface properties
Schwach, E., & Avérous, L. (2004) · Polymer International · doi:10.1002/pi.1636 · Cited by 187
Nabar, Y., Raquez, J. M., Dubois, P., & Narayan, R. (2005) · Biomacromolecules · doi:10.1021/bm0494242 · Cited by 180
Siracusa, V., Lotti, N., Munari, A., & Dalla Rosa, M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.04.026 · Cited by 178
Cited by
A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs
Kim, M. S., Chang, H., Zheng, L., Yan, Q., Pfleger, B. F., Klier, J., Nelson, K., Majumder, E. L.-W., & Huber, G. W. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00876 · Cited by 542
Cheng, H., Chen, L., McClements, D. J., Yang, T., Zhang, Z., Ren, F., Miao, M., Tian, Y., & Jin, Z. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.05.017 · Cited by 467
Plastic Pollution: A Material Problem?
Millican, J. M., & Agarwal, S. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02814 · Cited by 261
Aversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Huang, S., Dong, Q., Che, S., Li, R., & Tang, K. H. D. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178911 · Cited by 132
Metadata
- Authors
- Dammak, M., Fourati, Y., Tarrés, Q., Delgado-Aguilar, M., Mutjé, P., & Boufi, S.
- Venue
- Industrial Crops and Products
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 144
- Pages
- 112061
- ISSN
- 0926-6690 (ISSN-L)
- OpenAlex
- W2997270865
- Cited by
- 297
- References
- 18
- FWCI
- 5.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability. https://app.cochat.ai/papers/10.1016/j.indcrop.2019.112061
- The paper
- Dammak, M., Fourati, Y., Tarrés, Q., Delgado-Aguilar, M., Mutjé, P., & Boufi, S. (2020). Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability. Industrial Crops and Products. https://doi.org/10.1016/j.indcrop.2019.112061
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.