The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fabrication and characterization of CMC-based nanocomposites reinforced with sodium montmorillonite and TiO2 nanomaterials
Abstract
In this study, a novel carboxymethyl cellulose (CMC)-based ternary nanocomposite films containing sodium montmorillonite (Na-MMT) (1, 3 and 5% wt) and titanium dioxide (TiO2) (1, 3 and 5% wt) nanoparticles (NPs) were made via casting method. The results showed that addition of NPs decremented water vapor permeability of the films up to 39% and 50% by adding Na-MMT, and Na-MMT + TiO2, respectively, while moisture content, density and glass transition temperature incremented slightly. The nanoclays amplified resistance of the nanocomposites against tensile stress and Young's modulus (YM) of the films at the expense of elongation at break. A synergistic effect of NPs on moisture uptake reduction (≈ 40%) of films was observed. Nano-TiO2 was strongly effective in UV-light blocking (The films containing 5% TiO2 removed more than 99% of UV and more than 98% of visible lights). The interactions, crystallinity and morphology of the nanocomposites were investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM). Development of hydrogen bonds between the hydroxyl groups of CMC and nanoparticles was indicated by FT-IR spectroscopy. Conforming to the XRD analysis, clay nanolayers organized an intercalated structure in the nanocomposites, whereas a limited agglomeration of TiO2 nanoparticles led to increment of films crystallinity. SEM micrographs showed well-dispersed Na-MMT and TiO2 NPs through the films surface especially at low concentrations. In conclusion, although the films loaded with nanoclays exhibited better properties than the control film, inclusion of TiO2 more improved the functional characteristics of them and extended the potential as a biodegradable packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Cited by
Zhang, X., Liu, Y., Yong, H., Qin, Y., Liu, J., & Liu, J. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.03.009 · Cited by 599
The Effect of Nanofillers on the Functional Properties of Biopolymer-Based Films: A Review
Jamróz, E., Kulawik, P., & Kopel, P. (2019) · Polymers · doi:10.3390/polym11040675 · Cited by 515
(Bio)Nanotechnology in Food Science—Food Packaging
Primožič, M., Knez, Ž., & Leitgeb, M. (2021) · Nanomaterials · doi:10.3390/nano11020292 · Cited by 290
Surendren, A., Mohanty, A. K., Liu, Q., & Misra, M. (2022) · Green Chemistry · doi:10.1039/d2gc02169b · Cited by 275
Metadata
- Authors
- Fathi Achachlouei, B., & Zahedi, Y.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 199
- Pages
- 415-425
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2847190609
- Cited by
- 175
- References
- 1
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication and characterization of CMC-based nanocomposites reinforced with sodium montmorillonite and TiO2 nanomaterials. https://app.cochat.ai/papers/10.1016/j.carbpol.2018.07.031
- The paper
- Fathi Achachlouei, B., & Zahedi, Y. (2018). Fabrication and characterization of CMC-based nanocomposites reinforced with sodium montmorillonite and TiO2 nanomaterials. Carbohydrate Polymers. https://doi.org/10.1016/j.carbpol.2018.07.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.