Comprehensive characterization of natural cellulosic fiber from Coccinia grandis stem
The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Abstract
The anatomical, physico-chemical, mechanical, thermal and surface characteristics of Coccinia grandis fiber (CGF) were studied for a potential substitute to the harmful synthetic fibers. The anatomical analysis of Coccinia grandis stem reveals the presence of high strength xylem fibers. Polarized light microscopy and scanning electron microscopy of CGF shows a hierarchical cell structure composed of a primary and a secondary cell wall, cell lumen and the middle lamellae. The average cross-sectional area and density of the CGF were 0.0111 mm2 and 1.5175 ± 0.005 g/cm3 respectively. The x-ray diffraction and Fourier transform infrared analyses of the fiber indicates the presence of cellulose Iβ with a crystallinity index of 46.09%. The mean Young's modulus and tensile strength of the CGF were 124 GPa and 775 MPa respectively, which is sufficient enough for the reinforcement in polymer composites. The thermogravimetric analysis confirms the thermal stability of CGF up to 250 °C, which is well within the polymerization process temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Idealized powder diffraction patterns for cellulose polymorphs
French, A. D. (2014) · Cellulose · doi:10.1007/s10570-013-0030-4 · Cited by 3,247
Polychromatic staining of plant cell walls by toluidine blue O
O'Brien, T. P., Feder, N., & McCully, M. E. (1964) · Protoplasma · doi:10.1007/bf01248568 · Cited by 2,405
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
De Rosa, I. M., Kenny, J. M., Puglia, D., Santulli, C., & Sarasini, F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.013 · Cited by 576
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis.L
Senthamaraikannan, P., & Kathiresan, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.072 · Cited by 540
Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark
Saravanakumar, S. S., Kumaravel, A., Nagarajan, T., Sudhakar, P., & Baskaran, R. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.064 · Cited by 441
Åkerholm, M., Hinterstoisser, B., & Salmén, L. (2004) · Carbohydrate Research · doi:10.1016/j.carres.2003.11.012 · Cited by 433
Characterization of new natural cellulosic fiber from Cissus quadrangularis root
Suyambulingam, I., Raj, R. E., & Sreenivasan, V. S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.051 · Cited by 414
Self-citationCharacterization of new natural cellulosic fiber from Lygeum spartum L.
Belouadah, Z., Ati, A., & Rokbi, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.024 · Cited by 378
Sreenivasan, V. S., Somasundaram, S., Ravindran, D., Manikandan, V., & Narayanasamy, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.004 · Cited by 372
Self-citationTribological behavior of natural fiber reinforced PLA composites
Bajpai, P. K., Singh, I., & Madaan, J. (2012) · Wear · doi:10.1016/j.wear.2012.10.019 · Cited by 366
Characterization of new natural cellulosic fiber from Cissus quadrangularis stem
Suyambulingam, I., & Raj, R. E. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.09.072 · Cited by 354
Self-citationStructure and properties of high quality natural cellulose fibers from cornstalks
Reddy, N., & Yang, Y. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.073 · Cited by 311
Liu, W., Mohanty, A. K., Drzal, L. T., Askel, P., & Misra, M. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000012942.83614.75 · Cited by 269
The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites
Qin, C., Soykeabkaew, N., Ni, X., & Peijs, T. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.06.019 · Cited by 236
Chabannes, M., Ruel, K., Yoshinaga, A., Chabbert, B., Jauneau, A., Joseleau, J., & Boudet, A. (2001) · The Plant Journal · doi:10.1046/j.1365-313x.2001.01159.x · Cited by 214
Ishikawa, A., Okano, T., & Sugiyama, J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00516-2 · Cited by 197
Biagiotti, J., Puglia, D., Torre, L., Kenny, J. M., Arbelaiz, A., Cantero, G., Marieta, C., Llano‐Ponte, R., & Mondragòn, I. (2004) · Polymer Composites · doi:10.1002/pc.20040 · Cited by 159
Physico-chemical and microstructural characterization of “Rhectophyllum camerunense” plant fiber
Béakou, A., Ntenga, R., Lepetit, J., Ateba, A., & Ayina, L. O. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.09.002 · Cited by 156
Sreenivasan, V. S., Ravindran, D., Manikandan, V., & Narayanasamy, R. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.01.004 · Cited by 142
Self-citationOn the microstructure and physical properties of untreated raffia textilis fiber
Elenga, R. G., Dirras, G. F., Goma, J., Djémia, P., & Biget, M. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.001 · Cited by 129
Pearl, I. A. (1967) · Cited by 128
Characterization of native crystalline cellulose in the cell walls of Oomycota
Helbert, W., Sugiyama, J., Ishihara, M., & Yamanaka, S. (1997) · Journal of Biotechnology · doi:10.1016/s0168-1656(97)00084-9 · Cited by 111
Binoj, J. S., Raj, R. E., & Suyambulingam, I. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.02.019 · Cited by 93
Self-citationElements of Botanical Microtechnique
McL, R. C. (1941) · Nature · doi:10.1038/148241b0 · Cited by 79
Kalimuthu, M., Rajini, N., Pitchipoo, P., Sreenivasan, V. S., Jappes, J. T. W., & Alavudeen, A. (2015) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684415570045 · Cited by 57
Self-citationMohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Biopolymer composites: a review
Aaliya, B., Sunooj, K. V., & Lackner, M. (2021) · International Journal of Biobased Plastics · doi:10.1080/24759651.2021.1881214 · Cited by 298
Metadata
- Authors
- Jebadurai, S. G., Raj, R. E., Sreenivasan, V. S., & Binoj, J. S.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 207
- Pages
- 675-683
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2904422541
- Cited by
- 172
- References
- 32
- FWCI
- 6.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.