The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Equilibrium two-parameter isotherms of acid dyes sorption by activated carbons: Study of residual errors
Open accessAbstract
The adsorption of two acid dyes Acid Black 1 (AB1) and Acid Blue 113 (AB113) onto mesoporous granular pine-cone derived activated carbon and the adsorption of three acid dyes Acid Black 80 (AB80), Acid Red 114 (AR114) and Acid Yellow 117 (AY117) onto microporous Granular Activated Carbon (GAC) type F400, from aqueous solution, has been studied in a batch system. Seven two-parameter isotherm models – Langmuir, Freundlich, Dubinin–Radushkevich, Temkin, Halsey, Jovanovic and Harkins–Jura – were used to correlate the experimental data. Adsorption isotherm modeling shows that the interaction of dye with activated carbon surface is by localized monolayer adsorption. In order to determine the best fit isotherm for each system, nine error analysis methods, namely, chi-square (χ2), log-likelihood (G2), residual root mean square error (RMSE), sum of the squares of the errors (ERRSQ), composite functional error (HYBRD), derivative of Marquardt's percent standard deviation (MPSD), average relative error (ARE), sum of absolute error (EABS) and average percentage error (APE) were used to evaluate the data. In order to facilitate decision making for the best fit data set, a procedure of normalizing and combining the error results was adopted producing a “sum of the normalized errors” for each parameter set from which the “lowest normalized error set” is selected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new look at the statistical model identification
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100705 · Cited by 51,879
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
An Introduction to Categorical Data Analysis
Agresti, A. (2007) · Wiley Series in Probability and Statistics · doi:10.1002/0470114754 · Cited by 6,689
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Robinson, T., McMullan, G., Marchant, R., & Nigam, P. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00080-8 · Cited by 4,422
ANew Look at the Statistical Model Identification
AKAlKE, H. (2011) · Cited by 4,177
Removal of synthetic dyes from wastewaters: a review
Forgacs, E., Cserháti, T., & Oros, G. (2004) · Environment International · doi:10.1016/j.envint.2004.02.001 · Cited by 3,008
Pore- and Solid-Diffusion Kinetics in Fixed-Bed Adsorption under Constant-Pattern Conditions
Hall, K. R., Eagleton, L. C., Acrivos, A., & Vermeulen, T. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160018a011 · Cited by 2,819
The Equation of the Characteristic Curve of Activated Charcoal
Dubinin, M. M. (1947) · Доклады Академии наук · Cited by 2,108
Mallows, C. L. (1995) · Technometrics · doi:10.1080/00401706.1995.10484370 · Cited by 2,083
Kinetics of ammonia synthesis on promoted iron catalysts
Temkin, M. (1940) · Medical Entomology and Zoology · Cited by 2,068
Mallows, C. L. (1973) · Technometrics · doi:10.2307/1267380 · Cited by 1,975
Kinetic Models for the Sorption of Dye from Aqueous Solution by Wood
Ho, Y. S., & Mckay, G. (1998) · Process Safety and Environmental Protection · doi:10.1205/095758298529326 · Cited by 1,656
Self-citationPhysical Adsorption on Non-Uniform Surfaces
Halsey, G. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746689 · Cited by 1,472
Mallows, C. L. (1995) · Technometrics · doi:10.2307/1269729 · Cited by 1,080
Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems
Allen, S. J., Mckay, G., & Porter, J. F. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.078 · Cited by 1,051
Self-citationOptimization of Chemical Processes
Edgar, T. F., Himmelblau, D. M., & Lasdon, L. S. (1987) · Cited by 758
Regression analysis for the sorption isotherms of basic dyes on sugarcane dust
Ho, Y.-S., Chiu, W.-T., & Wang, C.-C. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.10.021 · Cited by 569
Selection of optimum sorption isotherm
Ho, Y. (2004) · Carbon · doi:10.1016/j.carbon.2004.03.019 · Cited by 565
The Use of Maximum Likelihood Estimates in $\chi^2$ Tests for Goodness of Fit
Chernoff, H., & Lehmann, E. L. (1954) · The Annals of Mathematical Statistics · doi:10.1214/aoms/1177728726 · Cited by 559
Arami, M., Limaee, N. Y., Mahmoodi, N. M., & Tabrizi, N. S. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.03.020 · Cited by 550
Removal of basic dye from aqueous solution using tree fern as a biosorbent
Ho, Y.-S., Chiang, T.-H., & Hsueh, Y.-M. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2003.11.035 · Cited by 456
An Introduction to Categorical Data Analysis
Bilder, C. R., & Tebbs, J. M. (2008) · Journal of the American Statistical Association · doi:10.1198/jasa.2008.s251 · Cited by 455
Ncibi, M. C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.08.038 · Cited by 290
Choy, K. K. H., Porter, J. F., & McKay, G. (2000) · Journal of Chemical & Engineering Data · doi:10.1021/je9902894 · Cited by 286
Self-citationComparative cost of colour removal from textile effluents using natural adsorbents
Nassar, M. M., & El‐Geundi, M. S. (1991) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.280500210 · Cited by 246
Correlation of equilibrium adsorption data of condensible vapours on porous adsorbents
Kapoor, A., & Yang, R. T. (1989) · Gas Separation & Purification · doi:10.1016/0950-4214(89)80004-0 · Cited by 246
Physical adsorption of gases: I: Isotherms for monolayer and multilayer adsorption
Jovanović, D. S. (1969) · Kolloid-Zeitschrift & Zeitschrift für Polymere · doi:10.1007/bf01542530 · Cited by 226
Comparison of isotherm models for hydrocarbon adsorption on activated carbon
Malek, A., & Farooq, S. (1996) · AIChE Journal · doi:10.1002/aic.690421120 · Cited by 224
Intraparticle diffusion in single and multicomponent acid dye adsorption from wastewater onto carbon
Choy, K. K. H., Porter, J. F., & McKay, G. (2004) · Chemical Engineering Journal · doi:10.1016/j.cej.2004.05.012 · Cited by 142
Self-citationKhan, A. R., Al-Waheab, I. R., & Al-Haddad, A. A. (1996) · Environmental Technology · doi:10.1080/09593331708616356 · Cited by 131
Tsai, S., & Juang, K.-W. (2000) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1023/a:1010694910170 · Cited by 120
Modelling of the competitive isotherms and the chromatographic separation of two enantiomers
Seidel‐Morgenstern, A., & Guiochon, G. A. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80189-w · Cited by 115
Seidel, A., & Gelbin, D. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)87128-8 · Cited by 107
Valix, M., Cheung, W. H., & McKay, G. (2006) · Langmuir · doi:10.1021/la051711j · Cited by 103
Self-citationComputational methods in chemical engineering
(1996) · Choice Reviews Online · doi:10.5860/choice.33-2756 · Cited by 84
Desorption and regeneration of dye colours from low-cost materials
McKay, G., Ramprasad, G., & Mowli, P. P. (1987) · Water Research · doi:10.1016/0043-1354(87)90218-1 · Cited by 84
Self-citationHarkins, W. D., & Jura, G. (1944) · The Journal of Chemical Physics · doi:10.1063/1.1723913 · Cited by 81
Ncibi, M. C., Altenor, S., Seffen, M., Brouers, F., & Gaspard, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.04.001 · Cited by 70
Cited by
Martins, A. C., Pezoti, O., Cazetta, A. L., Bedin, K. C., Yamazaki, D. A. S., Bandoch, G. F. G., Asefa, T., Visentainer, J. V., & Almeida, V. C. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.017 · Cited by 779
Adsorption isotherm models: A comprehensive and systematic review (2010−2020)
Mozaffari Majd, M., Kordzadeh-Kermani, V., Ghalandari, V., Askari, A., & Sillanpää, M. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151334 · Cited by 728
Vargas, A. M. M., Cazetta, A. L., Kunita, M. H., Silva, T. L., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.067 · Cited by 585
Jang, H. M., Yoo, S., Choi, Y.-K., Park, S., & Kan, E. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.013 · Cited by 580
Relevance of isotherm models in biosorption of pollutants by agricultural byproducts
Rangabhashiyam, S., Anu, N., Giri Nandagopal, M. S., & Selvaraju, N. (2014) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2014.01.014 · Cited by 478
Metadata
- Authors
- Hadi, M., Samarghandi, M. R., & McKay, G.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2010-06
- Volume
- 160
- Issue
- 2
- Pages
- 408-416
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W1995157209
- Cited by
- 326
- References
- 41
- FWCI
- 11.77
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.