The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Modeling of adsorption isotherms and kinetics of reactive dye from aqueous solution by peanut hull
Abstract
Adsorption of Reactive Black 5 (RB5) in aqueous solution by peanut hull was studied by using Placket–Burman (PB) and Central Composite Design (CCD). Four out of the 7 factors (initial dye concentration, initial solution pH, amount of adsorbent, temperature, particle size, shaking speed and contact time) studied by PB design influenced the adsorption of dye. A CCD was used to develop mathematical model equation. Analysis of variance (ANOVA) showed a high coefficient of determination value (R2 = 0.95). Linear and quadratic effects of the initial dye concentration and linear effect of peanut hull quantity were demonstrated to be very significant (P < 0.05) for RB5 adsorption. The interaction between peanut hull dose and initial dye concentration showed remarkable effect on adsorption process. The equilibrium adsorption data of RB5 on peanut hull were analyzed by Langmuir and Freundlich models. The monolayer adsorption capacity (qm) increased from 50 to 55.55 mg/g with the increase in temperature from 20 °C to 60 °C. The kinetic data were analyzed using the pseudo-first-order and pseudo-second-order adsorption kinetic models. According to these models, the rate constants were calculated for different initial dye concentrations. It can be concluded that the experimental data are well defined with pseudo-second-order kinetic model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Response surface methodology (RSM) as a tool for optimization in analytical chemistry
Bezerra, M. A., Santelli, R. E., Oliveira, E. P., Villar, L. S., & Escaleira, L. A. (2008) · Talanta · doi:10.1016/j.talanta.2008.05.019 · Cited by 6,075
Design and Analysis of Experiments
Srinivasan, S. (1992) · Technometrics · doi:10.1080/00401706.1992.10484919 · Cited by 2,747
Chatfield, C., & Weisberg, S. (1986) · Journal of the Royal Statistical Society. Series A (General) · doi:10.2307/2981572 · Cited by 1,365
ALDEGS, Y., ELBARGHOUTHI, M., ELSHEIKH, A., & WALKER, G. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2007.03.001 · Cited by 1,292
Hassard, T. H., & Weisberg, S. (1981) · The Statistician · doi:10.2307/2987575 · Cited by 1,216
Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems
Allen, S. J., Mckay, G., & Porter, J. F. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.078 · Cited by 1,051
Utilization of powdered peanut hull as biosorbent for removal of anionic dyes from aqueous solution
Gong, R., Ding, Y., Li, M., Yang, C., Liu, H., & Sun, Y. (2005) · Dyes and Pigments · doi:10.1016/j.dyepig.2004.05.005 · Cited by 500
Amin, N. K. (2008) · Desalination · doi:10.1016/j.desal.2007.01.203 · Cited by 478
Aksu, Z., & Tezer, S. (2000) · Process Biochemistry · doi:10.1016/s0032-9592(00)00233-8 · Cited by 458
Optimization of α-amylase production by Bacillus sp. using response surface methodology
Tanyildizi, M. S., Özer, D., & Elibol, M. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.06.018 · Cited by 396
Self-citationGarg, U. K., Kaur, M. P., Garg, V. K., & Sud, D. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.02.011 · Cited by 341
Adsorption of Reactive Black 5 from an aqueous solution: equilibrium and kinetic studies
Eren, Z., & Acar, F. N. (2006) · Desalination · doi:10.1016/j.desal.2005.10.022 · Cited by 338
Papic, S. (2004) · Dyes and Pigments · doi:10.1016/s0143-7208(03)00148-7 · Cited by 322
Evaluation of the adsorptive capacity of peanut hull pellets for heavy metals in solution
Brown, P., Atly Jefcoat, I., Parrish, D., Gill, S., & Graham, E. (2000) · Advances in Environmental Research · doi:10.1016/s1093-0191(00)00004-6 · Cited by 291
Potential use of cotton plant wastes for the removal of Remazol Black B reactive dye
Tunç, Ö., Tanacı, H., & Aksu, Z. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.078 · Cited by 280
Removal of Cu(II) from aqueous solution by agricultural by-product: Peanut hull
Zhu, C.-S., Wang, L.-P., & Chen, W.-B. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.02.085 · Cited by 278
Methylene blue adsorption from aqueous solution by dehydrated peanut hull
Özer, D., Dursun, G., & Özer, A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.092 · Cited by 274
Ip, A. W. M., Barford, J. P., & McKay, G. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.05.015 · Cited by 234
Utilization of ground eggshell waste as an adsorbent for the removal of dyes from aqueous solution
Tsai, W.-T., Hsien, K.-J., Hsu, H.-C., Lin, C.-M., Lin, K.-Y., & Chiu, C.-H. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.04.010 · Cited by 222
Optimization of an azo dye batch adsorption parameters using Box–Behnken design
Tripathi, P., Srivastava, V. C., & Kumar, A. (2009) · Desalination · doi:10.1016/j.desal.2009.03.010 · Cited by 222
Peanut hull pellets as a single use sorbent for the capture of Cu(II) from wastewater
Johnson, P. D., Watson, M. A., Brown, J., & Jefcoat, I. A. (2002) · Waste Management · doi:10.1016/s0956-053x(01)00036-8 · Cited by 205
Hameed, B. H., & El-Khaiary, M. I. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.11.102 · Cited by 204
Dafale, N., Rao, N. N., Meshram, S. U., & Wate, S. R. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.04.044 · Cited by 179
The reuse of dried activated sludge for adsorption of reactive dye
Gulnaz, O., Kaya, A., & Dincer, S. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.10.050 · Cited by 162
Xue, Y., Hou, H., & Zhu, S. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.017 · Cited by 162
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2007) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.12.018 · Cited by 150
Application of response surface analysis to the photolytic degradation of Basic Red 2 dye
Körbahti, B. K., & Rauf, M. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.06.016 · Cited by 125
Won, S. W., Kim, H.-J., Choi, S.-H., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.04.005 · Cited by 92
Removal characteristics of reactive black 5 using surfactant-modified activated carbon
Choi, H.-D., Shin, M., Kim, D., Jeon, C., & Baek, K. (2008) · Desalination · doi:10.1016/j.desal.2007.01.224 · Cited by 71
Şayan, E. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.03.025 · Cited by 67
Ozkan‐Yucel, U. G., & Gokcay, C. F. (2010) · CLEAN - Soil Air Water · doi:10.1002/clen.200900165 · Cited by 12
Cited by
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357
Cationic and anionic dye adsorption by agricultural solid wastes: A comprehensive review
Salleh, M. A. M., Mahmoud, D. K., Karim, W. A. W. A., & Idris, A. (2011) · Desalination · doi:10.1016/j.desal.2011.07.019 · Cited by 1,916
Water Purification by Using Adsorbents: A Review
Singh, N. B., Nagpal, G., Agrawal, S., & Rachna (2018) · Environmental Technology & Innovation · doi:10.1016/j.eti.2018.05.006 · Cited by 962
Hassan, M. M., & Carr, C. M. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.043 · Cited by 816
A Review on Heavy Metal Ions and Dye Adsorption from Water by Agricultural Solid Waste Adsorbents
Afroze, S., & Sen, T. K. (2018) · Water, Air, & Soil Pollution · doi:10.1007/s11270-018-3869-z · Cited by 587
Metadata
- Authors
- Tanyildizi, M. Ş.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2011-04
- Volume
- 168
- Issue
- 3
- Pages
- 1234-1240
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W1969318513
- Cited by
- 269
- References
- 31
- FWCI
- 19.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.