The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Optimized waste tea activated carbon for adsorption of Methylene Blue and Acid Blue 29 dyes using response surface methodology
Abstract
Abstract Waste tea activated carbon (WTAC) was produced at optimum conditions for adsorption of both anionic and cationic dyes. The WTAC was produced through chemical activation with potassium acetate for adsorption of Methylene Blue (MB) and Acid Blue 29 (AB29) dyes. Response surface methodology statistical technique was used to optimize the preparation conditions which were activation temperature, activation time and chemical impregnation ratio (IR); with percentage yield and removal as the targeted responses. The optimal conditions obtained for good percentage yield and removal of the two dyes were at 800 °C, IR 1.4 and 120 min. The high surface area of 854.30 m 2 /g and mesoporous adsorbent prepared gave good adsorption capacities of 453.12 and 554.30 mg/g for AB29 and MB, respectively. Adsorption data were modeled using Langmuir, Freundlich and Temkin adsorption isotherms; the adsorption of MB and AB29 on WTAC both obeyed Langmuir model and, pseudo-second-order kinetics was the order that best described the two adsorption processes. The WTAC produced can be used effectively to salvage pollution problems posed by both anionic and cationic dyes in the environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
The constitution and fundamental properties of solids and liquids
Langmuir, I. (1917) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(17)90938-x · Cited by 3,778
ALDEGS, Y., ELBARGHOUTHI, M., ELSHEIKH, A., & WALKER, G. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2007.03.001 · Cited by 1,292
Recent modifications to Langmuir isotherms
Temkin, M. J., & Pyzhev, V. (1940) · Cited by 1,057
Industrial water pollution control
Eckenfelder, W. W. (2000) · Andalas University Repository (Andalas University) · Cited by 926
Al-Ghouti, M. A., Khraisheh, M. A. M., Allen, S. J., & Ahmad, M. N. (2003) · Journal of Environmental Management · doi:10.1016/j.jenvman.2003.09.005 · Cited by 705
Adsorptive removal of methylene blue by tea waste
Uddin, M. T., Islam, M. A., Mahmud, S., & Rukanuzzaman, M. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.07.131 · Cited by 568
Amin, N. K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.067 · Cited by 547
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008) · Desalination · doi:10.1016/j.desal.2007.07.005 · Cited by 512
Self-citationAdsorption of Acid Blue 193 from aqueous solutions onto Na–bentonite and DTMA–bentonite
Özcan, A. S., Erdem, B., & Özcan, A. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.07.035 · Cited by 482
Jaycock, M. J., & Parfitt, G. D. (1980) · Cited by 454
Production of activated carbon from coconut shell: Optimization using response surface methodology
Gratuito, M. K. B., Panyathanmaporn, T., Chumnanklang, R.-A., Sirinuntawittaya, N., & Dutta, A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.09.042 · Cited by 429
Preparing activated carbon from various nutshells by chemical activation with K2CO3
Hayashi, J., Horikawa, T., Takeda, I., Muroyama, K., & Nasir Ani, F. (2002) · Carbon · doi:10.1016/s0008-6223(02)00118-5 · Cited by 407
Hameed, B. H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.05.120 · Cited by 402
Self-citationAdsorption of basic dyes from aqueous solution onto activated carbons
El Qada, E. N., Allen, S. J., & Walker, G. M. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.02.023 · Cited by 401
Ahmad, M. A., & Alrozi, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.018 · Cited by 396
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.09.014 · Cited by 378
Self-citationHadi, M., Samarghandi, M. R., & McKay, G. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.03.016 · Cited by 326
Auta, M., & Hameed, B. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.017 · Cited by 287
Self-citationChiou, M.-S., & Chuang, G.-S. (2006) · Chemosphere · doi:10.1016/j.chemosphere.2005.04.068 · Cited by 280
Ahmad, M. A., & Alrozi, R. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.049 · Cited by 226
Li, Q., Yue, Q., Su, Y., Gao, B., & Sun, H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.033 · Cited by 199
Hameed, B. H., Tan, I. A. W., & Ahmad, A. L. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.088 · Cited by 196
Self-citationŞentorun-Shalaby, Ç., Uçak-Astarlıogˇlu, M. G., Artok, L., & Sarıcı, Ç. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.09.003 · Cited by 194
Mittal, A., Gajbe, V., & Mittal, J. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.04.117 · Cited by 150
Al-Degs, Y. S., Khraisheh, M. A. M., Allen, S. J., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.10.009 · Cited by 134
Dolaş, H., Şahi̇n, Ö., Saka, C., & Demir, H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.061 · Cited by 118
Ahmaruzzaman, M., & Sorokhaibam, L. G. (2010) · Journal of Chemical & Engineering Data · doi:10.1021/je100117s · Cited by 108
Duran, C., Özdeş, D., Gündoğdu, A., İmamoğlu, M., & Şentürk, H. B. (2010) · Analytica Chimica Acta · doi:10.1016/j.aca.2010.12.029 · Cited by 105
Dafale, N. A., Wate, S. R., Meshram, S. U., & Nandy, T. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.058 · Cited by 100
Kinetic and thermodynamic investigations on arsenic adsorption onto dolomitic sorbents
Salameh, Y., Al-Lagtah, N. M. A., Ahmad, M. N., Allen, S. J., & Walker, G. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.03.039 · Cited by 79
dos Reis, L. G. T., Robaina, N. F., Pacheco, W. F., & Cassella, R. J. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.024 · Cited by 74
Investigations on the adsorption of acidic gases using activated dolomite
Duffy, A., Walker, G., & Allen, S. R. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.11.016 · Cited by 58
Adsorption of Acid blue 25 dye on diatomite in aqueous solutions
Badii, K., Ardejani, F. D., Saberi, M., Limaee, N. Y., & Shafaei, S. Z. (2010) · Indian Journal of Chemical Technology · Cited by 54
Kinetic and Thermodynamic Investigations on Arsenic Adsorption Onto Dolomitic Sorbents
Salameh, Y., Ahmad, M. N., Allen, S., Walker, G., Albadarin, A. B., & Al-Lagtah, N. M. A. (2010) · Chemical engineering transactions · doi:10.3303/cet1021133 · Cited by 38
Surface modification of Penicillium chrysogenum mycelium for enhanced anionic dye removal
Low, B. T., Ting, Y., & Deng, S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.10.004 · Cited by 36
Cited by
Methods for preparation and activation of activated carbon: a review
Heidarinejad, Z., Dehghani, M. H., Heidari, M., Javedan, G., Ali, I., & Sillanpää, M. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00955-0 · Cited by 1,475
Kinetics and Equilibrium Study for the Adsorption of Textile Dyes on Coconut Shell Activated Carbon
Aljeboree, A. M., Alshirifi, A. N., & Alkaim, A. F. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.01.020 · Cited by 844
Kabir, G., & Hameed, B. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.001 · Cited by 591
Self-citationReview on recent advances of carbon based adsorbent for methylene blue removal from waste water
Santoso, E., Ediati, R., Kusumawati, Y., Bahruji, H., Sulistiono, D. O., & Prasetyoko, D. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.100233 · Cited by 500
Auta, M., & Hameed, B. H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.09.066 · Cited by 454
Self-citation
Metadata
- Authors
- Auta, M., & Hameed, B. H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2011-11
- Volume
- 175
- Pages
- 233-243
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2076816836
- Cited by
- 258
- References
- 37
- FWCI
- 13.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.