The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Equilibrium two-parameter isotherms of acid dyes sorption by activated carbons: Study of residual errors
Open accessAbstract
The adsorption of two acid dyes Acid Black 1 (AB1) and Acid Blue 113 (AB113) onto mesoporous granular pine-cone derived activated carbon and the adsorption of three acid dyes Acid Black 80 (AB80), Acid Red 114 (AR114) and Acid Yellow 117 (AY117) onto microporous Granular Activated Carbon (GAC) type F400, from aqueous solution, has been studied in a batch system. Seven two-parameter isotherm models – Langmuir, Freundlich, Dubinin–Radushkevich, Temkin, Halsey, Jovanovic and Harkins–Jura – were used to correlate the experimental data. Adsorption isotherm modeling shows that the interaction of dye with activated carbon surface is by localized monolayer adsorption. In order to determine the best fit isotherm for each system, nine error analysis methods, namely, chi-square (χ2), log-likelihood (G2), residual root mean square error (RMSE), sum of the squares of the errors (ERRSQ), composite functional error (HYBRD), derivative of Marquardt's percent standard deviation (MPSD), average relative error (ARE), sum of absolute error (EABS) and average percentage error (APE) were used to evaluate the data. In order to facilitate decision making for the best fit data set, a procedure of normalizing and combining the error results was adopted producing a “sum of the normalized errors” for each parameter set from which the “lowest normalized error set” is selected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new look at the statistical model identification
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100705 · Cited by 51,879
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
An Introduction to Categorical Data Analysis
Agresti, A. (2007) · Wiley Series in Probability and Statistics · doi:10.1002/0470114754 · Cited by 6,689
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Robinson, T., McMullan, G., Marchant, R., & Nigam, P. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00080-8 · Cited by 4,422
ANew Look at the Statistical Model Identification
AKAlKE, H. (2011) · Cited by 4,177
Removal of synthetic dyes from wastewaters: a review
Forgacs, E., Cserháti, T., & Oros, G. (2004) · Environment International · doi:10.1016/j.envint.2004.02.001 · Cited by 3,008
Pore- and Solid-Diffusion Kinetics in Fixed-Bed Adsorption under Constant-Pattern Conditions
Hall, K. R., Eagleton, L. C., Acrivos, A., & Vermeulen, T. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160018a011 · Cited by 2,819
Cited by
Martins, A. C., Pezoti, O., Cazetta, A. L., Bedin, K. C., Yamazaki, D. A. S., Bandoch, G. F. G., Asefa, T., Visentainer, J. V., & Almeida, V. C. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.017 · Cited by 779
Adsorption isotherm models: A comprehensive and systematic review (2010−2020)
Mozaffari Majd, M., Kordzadeh-Kermani, V., Ghalandari, V., Askari, A., & Sillanpää, M. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151334 · Cited by 728
Vargas, A. M. M., Cazetta, A. L., Kunita, M. H., Silva, T. L., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.067 · Cited by 585
Jang, H. M., Yoo, S., Choi, Y.-K., Park, S., & Kan, E. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.013 · Cited by 580
Relevance of isotherm models in biosorption of pollutants by agricultural byproducts
Rangabhashiyam, S., Anu, N., Giri Nandagopal, M. S., & Selvaraju, N. (2014) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2014.01.014 · Cited by 478
Metadata
- Authors
- Hadi, M., Samarghandi, M. R., & McKay, G.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2010-06
- Volume
- 160
- Issue
- 2
- Pages
- 408-416
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W1995157209
- Cited by
- 326
- References
- 41
- FWCI
- 11.77
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Equilibrium two-parameter isotherms of acid dyes sorption by activated carbons: Study of residual errors. https://app.cochat.ai/papers/10.1016/j.cej.2010.03.016
- The paper
- Hadi, M., Samarghandi, M. R., & McKay, G. (2010). Equilibrium two-parameter isotherms of acid dyes sorption by activated carbons: Study of residual errors. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2010.03.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.