Carbon adsorbents for CO2 capture from bio-hydrogen and biogas streams: Breakthrough adsorption study
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The biological production of H2 by dark fermentation is being extensively investigated due to the great potential of the two-phase hydrogen/methane fermentation process for recovering energy from carbohydrate-rich wastes. However, the purification of the bio-hydrogen and biogas obtained is needed to produce high-purity H2 and CH4 streams appropriate for industrial application. In this study, the performance of three activated carbons (No1KCla-600, No1KClb-1000 and No2OS-1000), synthesized from phenol–formaldehyde resins, as potential adsorbents for CO2 capture from bio-hydrogen and biogas streams has been evaluated under dynamic conditions. Adsorption–desorption cycles by means of temperature swings were conducted at ambient temperature and atmospheric pressure with CO2/H2 (40/60 and 70/30 vol.%) and CO2/CH4 (50/50 vol.%) binary gas mixtures in a purpose-built fixed-bed set-up. The performance of the resin-derived carbons to separate CO2 was superior to that of reference commercial carbons in terms of CO2 uptake, breakthrough time and column efficiency. These adsorbents presented high CO2/H2 and CO2/CH4 selectivity values, were easily completely regenerated and did not show capacity decay after multiple cycling. Breakthrough capacities reached 2.11 and 2.03 mmol g−1 at 25 °C for 70/30 CO2/H2 and 50/50 CO2/CH4, respectively. The No2OS-1000 adsorbent, produced from phenol–formaldehyde resin and olive stones (20:80 wt.), gave the greatest values of CO2 capture capacity on a volumetric basis and CO2/CH4 selectivity, which may be advantageous to biogas purification applications because it reduces the size of the necessary equipment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100 · cited 1×
“Previous research conducted in our laboratory has successfully proved the potential of olive stones based carbons for post-combustion CO2 capture [42, 43].”
Self-citation
Cited by
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Recent advances in aerogels for environmental remediation applications: A review
Maleki, H. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.098 · Cited by 679
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
Sorption direct air capture with CO2 utilization
Jiang, L., Liu, W., Wang, R. Q., Gonzalez-Diaz, A., Rojas-Michaga, M. F., Michailos, S., Pourkashanian, M., Zhang, X. J., & Font-Palma, C. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101069 · Cited by 318
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Metadata
- Authors
- Gil, M. V., Álvarez-Gutiérrez, N., Martínez, M., Rubiera, F., Pevida, C., & Morán, A.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2015-06
- Volume
- 269
- Pages
- 148-158
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2041934128
- Cited by
- 96
- References
- 1
- FWCI
- 12.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Carbon adsorbents for CO2 capture from bio-hydrogen and biogas streams: Breakthrough adsorption study. https://app.cochat.ai/papers/10.1016/j.cej.2015.01.100
- The paper
- Gil, M. V., Álvarez-Gutiérrez, N., Martínez, M., Rubiera, F., Pevida, C., & Morán, A. (2015). Carbon adsorbents for CO2 capture from bio-hydrogen and biogas streams: Breakthrough adsorption study. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2015.01.100
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.