Development Trends in Porous Adsorbents for Carbon Capture
The DOI matches its Crossref record; 272 of the 275 references it cites were found in a registry or an index.
Abstract
Accumulation of greenhouse gases especially CO2 in the atmosphere leading to global warming with undesirable climate changes has been a serious global concern. Major power generation in the world is from coal based power plants. Carbon capture through pre- and post- combustion technologies with various technical options like adsorption, absorption, membrane separations, and chemical looping combustion with and without oxygen uncoupling have received considerable attention of researchers, environmentalists and the stake holders. Carbon capture from flue gases can be achieved with micro and meso porous adsorbents. This review covers carbonaceous (organic and metal organic frameworks) and noncarbonaceous (inorganic) porous adsorbents for CO2 adsorption at different process conditions and pore sizes. Focus is also given to noncarbonaceous micro and meso porous adsorbents in chemical looping combustion involving insitu CO2 capture at high temperature (>400 °C). Adsorption mechanisms, material characteristics, and synthesis methods are discussed. Attention is given to isosteric heats and characterization techniques. The options to enhance the techno-economic viability of carbon capture techniques by integrating with CO2 utilization to produce industrially important chemicals like ammonia and urea are analyzed. From the reader's perspective, for different classes of materials, each section has been summarized in the form of tables or figures to get a quick glance of the developments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“unlike the microporous organic polymers, there are not any complexity or concern regarding the synthesis, cost and environmental aspects of synthesis of carbon-based adsorbents [11,18,20,33].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [20]
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Research works printed but not linked: 24
- 10.1016/j.cherd.2012.02.011 · DOI
- 10.1016/S0196-8904(96)00242-7 · DOI · Paper page
- 2014, Design and Synthesis of Nitrogen-Doped Porous Carbon Materials for CO2 Capture and Investigation of CO2 Sorption Kinetics; 2.4.2
- Coombs D. S., 1997, Canadian Mineralogist, 35, 1571
- Collart, O.Nano design of an Aluminosilicate Framework into a mesoporous MCM-4A Architecture. Ph.D. Dissertation,Universiteti, Antwerpen, 2003.
- Kangwanwatana W., 2013, Chemical Engineering Transactions., 35, 1
- DRAFT: Technology and Applied R&D Needs for Carbon Capture- Beyond 2020, Resource Document for the Workshop on Basic Research needs for Carbon Capture: Beyond 2020, March, 2010, U.S. Department of Energy.
- 10.1016/j.apenergy.2012.11.034 · DOI · Paper page
- 10.1016/j.ijggc.2012.12.014 · DOI
- Buasri A., 2013, Sustainable Energy., 1, 7
- 10.1016/j.fuel.2009.11.019 · DOI · Paper page
- Songolzadeh M., 2012, Sci. World J., 6, 213
- Fauth D. J., 2003, Fuel Chemistry Division Preprints., 48, 169
- Kotyczka-Moranska M., 2012, Adv. Mater. Res., 48, 77
- Dangi G. P., 2012, Indian J. Chem., 51, 1238
- Ramírez-Moreno M. J., 2014, Alkaline and Alkaline-Earth Ceramic Oxides for CO2 Capture, Separation and Subsequent Catalytic Chemical Conversion, Intech
- 10.1039/C4EE01647E · DOI · Paper page
- Ouyang S., 2011, Sustain. Environ. Res., 21, 21
- 10.1016/j.apenergy.2014.02.012 · DOI
- Sciubidło A., 2012, Journal of Power Technologies., 92, 115
- Cho, P.Development and Characterisation of Oxygen-Carrier Materials for Chemical-Looping Combustion, Ph.D. Dissertation,Chalmers University of Technology, Göteborg, Sweden, 2005.
- Aydoğdu, B.Comparison of sorption capacities of hydrocarbons on different samples of MCM-41, Ph.D. Dissertation,Middle East Technical University,Turkey, 2013.
- Hanapimat, K. S. N. K.Synthesis and modification of micro and mesoporous materials as CO 2 adsorbents, Ph.D. Dissertation,Universiti Teknologi Malaysia,Malaysia, 2009.
- Kleitz, F.Ordered Mesoporous Materials: Template Removal, Frameworks and Morphology, Ph.D. Dissertation,Ruhr University Bochum,Germany, 2002.
Cited by
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework
Qazvini, O. T., Babarao, R., & Telfer, S. G. (2021) · Nature Communications · doi:10.1038/s41467-020-20489-2 · Cited by 350
Acidity and basicity of zeolites: A fundamental approach
Busca, G. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.007 · Cited by 290
Ding, N., Li, H., Feng, X., Wang, Q., Wang, S., Ma, L., Zhou, J., & Wang, B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06051 · Cited by 275
Metadata
- Authors
- Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V.
- Affiliations
- Birla Institute of Technology and Science - Hyderabad Campus (IN)
- Granules India Ltd, Gagillapur, Hyderabad, India
- Indian Institute of Chemical Technology (IN)
- Corresponding author
- Sreedhar, Inkollu
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-14
- Volume
- 49
- Issue
- 21
- Pages
- 12641-12661
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2242231821
- Cited by
- 127
- References
- 275
- Citations by year
- 2026: 12 · 2025: 6 · 2024: 16 · 2023: 16 · 2022: 7 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 10 · 2017: 17 · 2016: 15
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- BITS Pilani Hyderabad
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, CO2 adsorption, porous adsorbents, metal-organic frameworks, carbon adsorbents, porous inorganic materials, flue gas, chemical looping combustion, oxygen uncoupling, adsorption mechanism, isosteric heat of adsorption, CO2 utilization, ammonia synthesis, urea synthesis, coal-fired power plants, pore size
- MeSH terms
- Adsorption, Carbon Dioxide, Oxygen, Urea, Porosity, Climate Change, Carbon Sequestration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development Trends in Porous Adsorbents for Carbon Capture. https://app.cochat.ai/papers/10.1021/acs.est.5b03149
- The paper
- Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015). Development Trends in Porous Adsorbents for Carbon Capture. Environmental Science & Technology. https://doi.org/10.1021/acs.est.5b03149
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.