CoChat

Simultaneous syngas and biochar production during heavy metal separation from Cd/Zn hyperaccumulator (Sedum alfredii) by gasification

Cui, Xiaoqiang, Shen, Ye, Yang, Qianying, Kawi, Sibudjing, He, Zhenli, Yang, Xiaoe, Wang, Chi-Hwa · 2018 · Chemical Engineering Journal
Cited by 130

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

Abstract Phytoremediation is increasingly recognized as a cost-effective approach for remediation of heavy metal (HM) contaminated soils, whereas the derived HM-enriched hyperaccumulators must be properly harvested and disposed. In this study, gasification of Sedum alfredii was performed at a temperature series (300–900 °C) with different gasifying agents (N2, CO2 and air), then the transfer behaviors of zinc (Zn), cadmium (Cd), and lead (Pb) and the characteristics of the derived biochar and syngas were investigated. The high gasification temperatures and reducing atmosphere (N2) effectively enhanced the volatilization of Zn, Cd, and Pb, and the results from toxicity characteristic leaching process indicate that gasification greatly enhanced the stability and reduced the availability of HMs in S. alfredii. The CO2-derived biochars had moderate pH and greater stability, while the N2-derived biochars showed better energy density. The evolution of functional groups and crystalline phases in biochars were both influenced by the temperature, and the role of atmosphere was increasingly obvious at temperatures above 600 °C. As expected, biochars derived under N2 and CO2 both showed considerable sorption capacity for Pb (134.2–198.8 mg g−1) and Cd (38.1–186.8 mg g−1). CO2 atmosphere greatly enhanced the production of CO at higher temperatures (>700 °C), while N2 atmosphere favored the yield of H2 and CH4. These results imply that gasification could be a promising technique to achieve the separation of HMs from hyperaccumulator as well as the production of energy and multifunctional material, and this process is greatly affected by the gasification temperature and atmosphere.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2018.04.133

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 130

Metadata

Authors
Cui, X., Shen, Y., Yang, Q., Kawi, S., He, Z., Yang, X., & Wang, C.-H.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2018-09
Volume
347
Pages
543-551
ISSN
1385-8947 (ISSN-L)
OpenAlex
W2802789281
Cited by
130
References
4
FWCI
4.62
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.