The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Shaping of ultrahigh-loading MOF pellet with a strongly anti-tearing binder for gas separation and storage
Abstract
Abstract Four anion-pillared ultramicroporous powder (SIFSIX-3-Ni, SIFSIX-2-Cu-i, GEFSIX-2-Cu-i, TIFSIX-2-Cu-i) were shaped into pellets for the first time, using a strongly anti-tearing and highly sticky binder—polyvinyl butyral (PVB). PVB binder exhibited good compatibility and interaction with MOFs, which afforded the ultrahigh-loading of MOFs (up to 95%). Interestingly, this shaping method showed slight influence to the adsorption capacity of C2H2 (decreased by 0.56%–0.93%), while greatly hindered the adsorption of C2H4 (decreased by 5.0%–12.5%). These different influences resulted in the enhanced IAST selectivity (116.4) of GeFSIX-2-Cu-i pellet for the separation of C2H2/C2H4 (1:99, v/v), which was 35% larger than the pure GeFSIX-2-Cu-i powder (86.3). Fixed-bed breakthrough experiments showed that SIFSIX-3-Ni pellets achieved the effective separation of C2H2/C2H4 (1:99, v/v) mixtures. Furthermore, SO2 adsorption of SIFSIX-3-Ni pellets and GeFSIX-2-Cu-i pellets were obtained at 2000 ppm and 298 K. Remarkably, GeFSIX-2-Cu-i pellet had an excellent capacity of SO2 (95%-loading: 2.25 mmol g−1; 90%-loading: 1.96 mmol g−1) at such a low pressure. Additionally, this approach was applied to other three typical MOFs HKUST-1, Mg-MOF-74, and MIL-101-Cr for CO2 capture. It revealed that the PVB binder was applicable to diverse MOFs for pelletization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal-organic framework materials as catalysts
Lee, J., Farha, O. K., Roberts, J., Scheidt, K. A., Nguyen, S. T., & Hupp, J. T. (2009) · Chemical Society Reviews · doi:10.1039/b807080f · Cited by 7,969
Cited by
Yang, L., Qian, S., Wang, X., Cui, X., Chen, B., & Xing, H. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00756c · Cited by 746
Self-citationRecent advances in process engineering and upcoming applications of metal–organic frameworks
Ryu, U., Jee, S., Rao, P. C., Shin, J., Ko, C., Yoon, M., Park, K. S., & Choi, K. M. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213544 · Cited by 439
Large‐Scale Production of Metal–Organic Frameworks
Chakraborty, D., Yurdusen, A., Mouchaham, G., Nouar, F., & Serre, C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202309089 · Cited by 421
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
Metadata
- Authors
- Zheng, J., Cui, X., Yang, Q., Ren, Q., Yang, Y., & Xing, H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 354
- Pages
- 1075-1082
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2885337925
- Cited by
- 184
- References
- 1
- FWCI
- 4.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Shaping of ultrahigh-loading MOF pellet with a strongly anti-tearing binder for gas separation and storage. https://app.cochat.ai/papers/10.1016/j.cej.2018.08.119
- The paper
- Zheng, J., Cui, X., Yang, Q., Ren, Q., Yang, Y., & Xing, H. (2018). Shaping of ultrahigh-loading MOF pellet with a strongly anti-tearing binder for gas separation and storage. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.08.119
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.