Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.

3D printing of polymer matrix composites: A review and prospective

Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,474

A review on solid adsorbents for carbon dioxide capture

Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707

A short review of recent advances in CO 2 hydrogenation to hydrocarbons over heterogeneous catalysts

Li, W., Wang, H., Jiang, X., Zhu, J., Liu, Z., Guo, X., & Song, C. (2018) · RSC Advances · doi:10.1039/c7ra13546g · Cited by 690

Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review

Helwani, Z., Othman, M. R., Aziz, N., Kim, J., & Fernando, W. J. N. (2009) · Applied Catalysis A General · doi:10.1016/j.apcata.2009.05.021 · Cited by 614

Monolithic reactors for environmental applications

Avila, P., Montes, M., & Miró, E. E. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.02.025 · Cited by 539

Metal–organic frameworks meet scalable and sustainable synthesis

Julien, P., Mottillo, C., & Friščić, T. (2017) · Green Chemistry · doi:10.1039/c7gc01078h · Cited by 526

Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue Gas by Pressure Swing Adsorption

Chue, K.-T., Kim, J. N., Yoo, Y.-J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499

A review on inkjet printing of nanoparticle inks for flexible electronics

Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Parra‐Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 494

Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

Fu, K. K., Yao, Y., Dai, J., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 486

Conductive nanomaterials for 2D and 3D printed flexible electronics

Kamyshny, A. L., & Magdassi, S. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 477

Design and 3D Printing of Scaffolds and Tissues

An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461

Coordination-Chemistry Control of Proton Conductivity in the Iconic Metal–Organic Framework Material HKUST-1

Jeong, N. C., Samanta, B., Lee, C. Y., Farha, O. K., & Hupp, J. T. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2110152 · Cited by 435

Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption

Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424

Digital light processing 3D printing of conductive complex structures

Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 412

Structuring adsorbents and catalysts by processing of porous powders

Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363

Metal–organic framework gels and monoliths

Hou, J., Sapnik, A. F., & Bennett, T. D. (2020) · Chemical Science · doi:10.1039/c9sc04961d · Cited by 331

Structured adsorbents in gas separation processes

Rezaei, F., & Webley, P. A. (2009) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.10.004 · Cited by 305

3D-Printed Metal–Organic Framework Monoliths for Gas Adsorption Processes

Thakkar, H. V., Eastman, S., Al‐Naddaf, Q., Rownaghi, A. A., & Rezaei, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11626 · Cited by 302

Metallic Nanoparticle Inks for 3D Printing of Electronics

Tan, H., An, J., Chua, C. K., & Tran, T. A. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800831 · Cited by 297

3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments

Thakkar, H. V., Eastman, S., Hajari, A., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09647 · Cited by 294

Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing

Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 289

Laser Sintering of Liquid Metal Nanoparticles for Scalable Manufacturing of Soft and Flexible Electronics

Liu, S., Yuen, M. C., White, E. L., Boley, J. W., Deng, B., Cheng, G. J., & Kramer-Bottiglio, R. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08722 · Cited by 286

3D‐Printed Transparent Glass

Nguyen, D. T., Meyers, C. D., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C. Y., Duoss, E. B., Baumann, T. F., Suratwala, T. I., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273

Monoliths: A Review of the Basics, Preparation Methods and Their Relevance to Oxidation

Govender, S., & Friedrich, H. B. (2017) · Catalysts · doi:10.3390/catal7020062 · Cited by 249

Capture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption

Xiao, P., Zhang, J., Webley, P. A., Li, G., Singh, R. K., & Todd, R. (2008) · Adsorption · doi:10.1007/s10450-008-9128-7 · Cited by 248

Shape engineering of metal–organic frameworks

Valizadeh, B., Nguyen, T. N., & Stylianou, K. C. (2018) · Polyhedron · doi:10.1016/j.poly.2018.01.004 · Cited by 244

Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing

Zhu, C. Y., Qi, Z., Beck, V. A., Luneau, M., Lattimer, J. R. C., Chen, W., Worsley, M. A., Ye, J., Duoss, E. B., Spadaccini, C. M., et al. (2018) · Science Advances · doi:10.1126/sciadv.aas9459 · Cited by 219

3D printing of a heterogeneous copper-based catalyst

Tubio, C. R., Azuaje, J., Escalante, L., Coelho, A., Guitián, F., Sotelo, E., & Gil, Á. (2015) · Journal of Catalysis · doi:10.1016/j.jcat.2015.11.019 · Cited by 217

Optimum structured adsorbents for gas separation processes

Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210

A more efficient way to shape metal-organic framework (MOF) powder materials for hydrogen storage applications

Ren, J., Musyoka, N. M., Langmi, H. W., Swartbooi, A., North, B. C., & Mathe, M. K. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.011 · Cited by 192

Connecting Microscopic Structures, Mesoscale Assemblies, and Macroscopic Architectures in 3D-Printed Hierarchical Porous Covalent Organic Framework Foams

Mohammed, A. K., Usgaonkar, S. S., Kanheerampockil, F., Karak, S., Halder, A., Tharkar, M., Addicoat, M. A., Ajithkumar, T. G., & Banerjee, R. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c00555 · Cited by 187

Design of packed bed reactors: guides to catalyst shape, size, and loading selection

Afandizadeh, S., & Foumeny, E. A. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00072-7 · Cited by 184

Shaping of ultrahigh-loading MOF pellet with a strongly anti-tearing binder for gas separation and storage

Zheng, J., Cui, X., Yang, Q., Ren, Q., Yang, Y., & Xing, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.119 · Cited by 183

Experimental and numerical investigations on the water vapor adsorption isotherms and kinetics of binderless zeolite 13X

Mette, B., Kerskes, H., Drück, H., & Muller-Steinhagen, H. M. G. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.061 · Cited by 177

Three-dimensional Printed Acrylonitrile Butadiene Styrene Framework Coated with Cu-BTC Metal-organic Frameworks for the Removal of Methylene Blue

Wang, Z., Wang, J., Li, M., Sun, K., & Liu, C. (2014) · Scientific Reports · doi:10.1038/srep05939 · Cited by 175

Hierarchical-Coassembly-Enabled 3D-Printing of Homogeneous and Heterogeneous Covalent Organic Frameworks

Zhang, M., Li, L., Lin, Q., Tang, M., Wu, Y., & Ke, C. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b01561 · Cited by 172

Effects of pelletization pressure on the physical and chemical properties of the metal–organic frameworks Cu3(BTC)2 and UiO-66

Peterson, G. W., DeCoste, J. B., Glover, T. G., Huang, Y., Jasuja, H., & Walton, K. S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.02.025 · Cited by 166

CO2, CH4 and N2 separation with a 3DFD-printed ZSM-5 monolith

Couck, S., Lefevere, J., Mullens, S., Protasova, L. N., Meynen, V., Desmet, G., Baron, G. V., & Denayer, J. F. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.046 · Cited by 165

Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing

Wu, H., Chen, P., Yan, C., Cai, C., & Shi, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107704 · Cited by 159

MOF-74 and UTSA-16 film growth on monolithic structures and their CO2 adsorption performance

Rezaei, F., Lawson, S., Hosseini, H., Thakkar, H. V., Hajari, A., Monjezi, S., & Rownaghi, A. A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.058 · Cited by 155

Comparative Techno-Economic and Environmental Analysis of Ethylene and Propylene Manufacturing from Wet Shale Gas and Naphtha

Yang, M., & You, F. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00354 · Cited by 154

Formulation of Aminosilica Adsorbents into 3D-Printed Monoliths and Evaluation of Their CO 2 Capture Performance

Thakkar, H. V., Eastman, S., Al-Mamoori, A. A., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16732 · Cited by 151

Binder-free 3D printing of covalent organic framework (COF) monoliths for CO2 adsorption

Liu, X., Lim, G. J. H., Wang, Y., Zhang, L., Mullangi, D., Wu, Y., Zhao, D., Ding, J., Cheetham, A. K., & Wang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126333 · Cited by 145

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO 2 -ABS nanocomposites

Skorski, M., Esenther, J. M., Ahmed, Z., Miller, A. E., & Hartings, M. R. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1152879 · Cited by 144

3D Printed Optical Quality Silica and Silica–Titania Glasses from Sol–Gel Feedstocks

Destino, J. F., Dudukovic, N. A., Johnson, M. A., Nguyen, D. T., Yee, T. D., Egan, G. C., Sawvel, A. M., Steele, W. A., Baumann, T. F., Duoss, E. B., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700323 · Cited by 142

3D-Printing of Pure Metal–Organic Framework Monoliths

Lim, G. J. H., Wu, Y., Shah, B. B., Koh, J. J., Liu, C. K., Zhao, D., Cheetham, A. K., Wang, J., & Ding, J. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00069 · Cited by 137

3D-printed SAPO-34 monoliths for gas separation

Couck, S., Cousin-Saint-Remi, J., der Perre, S. V., Baron, G. V., Minas, C., Ruch, P., & Denayer, J. F. M. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.07.014 · Cited by 135

Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing

Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 133

Development of 3D-printed polymer-zeolite composite monoliths for gas separation

Thakkar, H. V., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.178 · Cited by 132

Adsorption and diffusion of H2, N2, CO, CH4 and CO2 in UTSA-16 metal-organic framework extrudates

Águeda, V. I., Delgado, J. A., Uguina, M. A., Brea, P., Spjelkavik, A. I., Blom, R., & Grande, C. A. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.08.039 · Cited by 131

Advanced Support Structures for Enhanced Catalytic Activity

Stuecker, J. N., Miller, J. E., Ferrizz, R. E., Mudd, J. E., & Cesarano, J. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030291v · Cited by 131

Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)

Busse, C., Freund, H., & Schwieger, W. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.01.023 · Cited by 127

Manufacturing of metal-organic framework monoliths and their application in CO 2 adsorption

Hong, W. Y., Perera, S. P., & Burrows, A. D. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.05.014 · Cited by 126

Combining additive manufacturing and catalysis: a review

Hurt, C., Brandt, M., Samudrala, S. P., Bhatelia, T., Patel, J., Selvakannan, P., & Bhargava, S. K. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00615b · Cited by 124

Effect of particle size gradation on the performance of glass-ceramic 3D printing process

Sun, C., Tian, X., Wang, L., Liu, Y., Wirth, C. M., Günster, J., Li, D., & Jin, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.09.197 · Cited by 120

Three-Dimensional Printing in Catalysis: Combining 3D Heterogeneous Copper and Palladium Catalysts for Multicatalytic Multicomponent Reactions

Díaz-Marta, A. S., Tubio, C. R., Carbajales, C., Fernández, C., Escalante, L., Sotelo, E., Guitián, F., Barrio, V. L., Gil, Á., & Coelho, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b02592 · Cited by 117

Amine-Functionalized MIL-101 Monoliths for CO 2 Removal from Enclosed Environments

Lawson, S., Griffin, C., Rapp, K., Rownaghi, A. A., & Rezaei, F. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b04508 · Cited by 115

Electrical conductive 3D-printed monolith adsorbent for CO2 capture

Regufe, M. J., Ferreira, A. F. P., LOUREIRO, J. M., Rodrigues, A. E., & Ribeiro, A. M. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.01.009 · Cited by 114

UTSA-16 Growth within 3D-Printed Co-Kaolin Monoliths with High Selectivity for CO2/CH4, CO2/N2, and CO2/H2 Separation

Lawson, S., Al‐Naddaf, Q., Krishnamurthy, A., Amour, M. S., Griffin, C., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05192 · Cited by 114

Light olefins/paraffins separation with 13X zeolite binderless beads

Narin, G., Martins, V. F. D., Campo, M. C., Ribeiro, A. M., Ferreira, A. F. P., Santos, J. C., Schumann, K., & Rodrigues, A. E. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.06.060 · Cited by 112

Low‐Cost Manufacturing of Bioresorbable Conductors by Evaporation–Condensation‐Mediated Laser Printing and Sintering of Zn Nanoparticles

Shou, W., Mahajan, B. K., Ludwig, B., Yu, X., Staggs, J., Huang, X. L., & Pan, H. (2017) · Advanced Materials · doi:10.1002/adma.201700172 · Cited by 109

Natural gas storage in activated carbon pellets without a binder

Inomata, K., Kanazawa, K., Urabe, Y., Hosono, H., & Araki, T. (2002) · Carbon · doi:10.1016/s0008-6223(01)00084-7 · Cited by 108

Fabricating Mechanically Robust Binder‐Free Structured Zeolites by 3D Printing Coupled with Zeolite Soldering: A Superior Configuration for CO2 Capture

Wang, S., Bai, P., Sun, M., Liu, W., Li, D., Wu, W., Yan, W., Shang, J., & Yu, J. (2019) · Advanced Science · doi:10.1002/advs.201901317 · Cited by 108

Catalytic cracking of n-hexane for producing light olefins on 3D-printed monoliths of MFI and FAU zeolites

Li, X., Li, W., Rezaei, F., & Rownaghi, A. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.001 · Cited by 106

Linking fresh paste microstructure, rheology and extrusion characteristics of cementitious binders for 3D printing

Nair, S. A. O., Alghamdi, H., Arora, A., Mehdipour, I., Sant, G., & Neithalath, N. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16305 · Cited by 106

Development of 3D-Printed Polymer-MOF Monoliths for CO 2 Adsorption

Lawson, S., Snarzyk, M., Hanify, D., Rownaghi, A. A., & Rezaei, F. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05445 · Cited by 105

Toward 3D printed hydrogen storage materials made with ABS‐MOF composites

Kreider, M. C., Sefa, M., Fedchak, J. A., Scherschligt, J. K., Bible, M., Natarajan, B., Klimov, N. N., Miller, A. E., Ahmed, Z., & Hartings, M. R. (2017) · Polymers for Advanced Technologies · doi:10.1002/pat.4197 · Cited by 104

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Middelkoop, V., Vamvakeros, A., de Wit, D., Jacques, S. D. M., Danaci, S., Jacquot, C., Vos, Y. D., Matras, D., Price, S. W. T., & Beale, A. M. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.07.013 · Cited by 104

Oxidative dehydrogenation of ethane under a cyclic redox scheme – Process simulations and analysis

Haribal, V. P., Neal, L. M., & Li, F. (2016) · Energy · doi:10.1016/j.energy.2016.11.039 · Cited by 102

3D-printing of hierarchical porous ZSM-5: The importance of the binder system

Lefevere, J., Protasova, L. N., Mullens, S., & Meynen, V. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.044 · Cited by 100

Effect of particle size on 3D printing performance of the food-ink system with cellular food materials

Lee, J. H., Won, D. J., Kim, H., & Park, H. J. (2019) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2019.03.014 · Cited by 99

An efficient and recyclable 3D printed α-Al2O3 catalyst for the multicomponent assembly of bioactive heterocycles

Azuaje, J., Tubio, C. R., Escalante, L., Gómez, M., Guitián, F., Coelho, A., Caamaño, O., Gil, Á., & Sotelo, E. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.11.031 · Cited by 94

Multiscale investigation of adsorption properties of novel 3D printed UTSA-16 structures

Grande, C. A., Blom, R., Middelkoop, V., Matras, D., Vamvakeros, A., Jacques, S. D. M., Beale, A. M., Michiel, M. D., Andreassen, K. A., & Bouzga, A. M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126166 · Cited by 94

The impact of formulation and 3D-printing on the catalytic properties of ZSM-5 zeolite

Lefevere, J., Mullens, S., & Meynen, V. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.058 · Cited by 93

Fabrication of granulated NaY zeolite nanoparticles using a new method and study the adsorption properties

Charkhi, A., Kazemeini, M., Ahmadi, S. J., & Kazemian, H. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.06.041 · Cited by 93

Designing a supercritical steam cycle to integrate the energy requirements of CO2 amine scrubbing

Romeo, L. M., Espatolero, S., & Bolea, I. (2008) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2008.03.002 · Cited by 92

Catalytic performance of Ni/CaO-Ca 5 Al 6 O 14 bifunctional catalyst extrudate in sorption-enhanced steam methane reforming

Pan, X., Zhou, Z., Zhao, C., & Cheng, Z. (2015) · Catalysis Today · doi:10.1016/j.cattod.2015.05.026 · Cited by 92

Gel–Print–Grow: A New Way of 3D Printing Metal–Organic Frameworks

Lawson, S., Alwakwak, A.-A., Rownaghi, A. A., & Rezaei, F. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18720 · Cited by 90

Methanol-to-olefin conversion on 3D-printed ZSM-5 monolith catalysts: Effects of metal doping, mesoporosity and acid strength

Li, X., Rezaei, F., & Rownaghi, A. A. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.016 · Cited by 89

The effects of cell density and intrinsic porosity on structural properties and adsorption kinetics in 3D-printed zeolite monoliths

Lawson, S., Adebayo, B. O., Robinson, C., Al‐Naddaf, Q., Rownaghi, A. A., & Rezaei, F. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115564 · Cited by 87

3D-Printed Fe-doped silicon carbide monolithic catalysts for wet peroxide oxidation processes

Quintanilla, A., Casas, J. A., Miranzo, P., Osendi, M. I., & Belmonte, M. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.04.066 · Cited by 83

The effect of the binder on the manufacture of a 5A zeolite monolith

Li, Y. Y., Perera, S. P., Crittenden, B. D., & Bridgwater, J. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00366-1 · Cited by 83

Optimization of process parameters on the extrusion of honeycomb shaped monolith of H-ZSM-5 zeolite

Aranzabal, A., Iturbe, D., Romero‐Sáez, M., González-Marcos, M. P., González-Velasco, J. R., & González-Marcos, J. A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.05.043 · Cited by 82

3D printed versus spherical adsorbents for gas sweetening

Middelkoop, V., Coenen, K., Schalck, J., Annaland, M. V. S., & Gallucci, F. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.130 · Cited by 81

Surface functionalization – a new functional dimension added to 3D printing

Jiang, P., Ji, Z., Wang, X., & Zhou, X. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc02850a · Cited by 81

Ammonia decomposition over 3D-printed CeO2 structures loaded with Ni

Lucentini, I., Serrano, I., Soler, L., Divins, N. J., & Llorca, J. (2019) · Applied Catalysis A General · doi:10.1016/j.apcata.2019.117382 · Cited by 80

3D-printed ZSM-5 monoliths with metal dopants for methanol conversion in the presence and absence of carbon dioxide

Magzoub, F., Li, X., Al-Darweesh, J., Rezaei, F., & Rownaghi, A. A. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.01.008 · Cited by 79

Adsorption of Propane and Propylene in Pellets and Crystals of 5A Zeolite

Grande, C. A., Gígola, C. E., & Rodrigues, A. E. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010494o · Cited by 78

3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction

Ugarteburu, A. E., Soler, L., Llorca, J., & Casanova, I. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.06.007 · Cited by 78

Three-Dimensional-Printed Core–Shell Structured MFI-Type Zeolite Monoliths for Volatile Organic Compound Capture under Humid Conditions

Wang, S., Bai, P., Wei, Y., Liu, W., Ren, X., Bai, J., Lu, Z., Yan, W., & Yu, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13819 · Cited by 76

Carbon-Based Honeycomb Monoliths for Environmental Gas-Phase Applications

Moreno‐Castilla, C., & Pérez‐Cadenas, A. F. (2010) · Materials · doi:10.3390/ma3021203 · Cited by 76

Binary adsorption of CO2/CH4 in binderless beads of 13X zeolite

Silva, J. A. C., Cunha, A. F., Schumann, K., & Rodrigues, A. E. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.12.017 · Cited by 74

Additive manufacturing of polymer-derived titania for one-step solar water purification

Vyatskikh, A., Kudo, A., Delalande, S., & Greer, J. R. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.010 · Cited by 74

Functionalized 3D Architected Materials via Thiol‐Michael Addition and Two‐Photon Lithography

Yee, D. W., Schulz, M. D., Grubbs, R. H., & Greer, J. R. (2017) · Advanced Materials · doi:10.1002/adma.201605293 · Cited by 73

Next frontiers in cleaner synthesis: 3D printed graphene-supported CeZrLa mixed-oxide nanocatalyst for CO2 utilisation and direct propylene carbonate production

Middelkoop, V., Slater, T. J. A., Florea, M., Neațu, F., Danaci, S., Onyenkeadi, V., Boonen, K., Saha, B., Bărăgău, I.-A., & Kellici, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.274 · Cited by 72

Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane

Michorczyk, P., Hędrzak, E., & Węgrzyniak, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08629b · Cited by 71

Adsorption of propane and propylene in zeolite 4A honeycomb monolith

Grande, C. A., Cavenati, S., Bárcia, P. S., Hammer, J., Fritz, H.-G., & Rodrigues, A. E. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2005.11.058 · Cited by 70

3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process

Gyak, K., Vishwakarma, N. K., Hwang, Y., Kim, J., Yun, H., & Kim, D. (2019) · Reaction Chemistry & Engineering · doi:10.1039/c9re00201d · Cited by 70

Towards additive manufacturing of magnesium alloys through integration of binderless 3D printing and rapid microwave sintering

Salehi, M., Maleksaeedi, S., Nai, M. L. S., & Gupta, M. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100790 · Cited by 68

Hierarchical porous metal–organic framework monoliths

Ahmed, A., Forster, M., Clowes, R., Myers, P., & Zhang, H. (2014) · Chemical Communications · doi:10.1039/c4cc06967f · Cited by 68

Adsorption of CO2 on a confined fluidized bed of pelletized 13X zeolite

Girimonte, R., Formisani, B., & Testa, F. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.01.033 · Cited by 66

Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO 2 Capture

Akhtar, F., & Bergström, L. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.04044.x · Cited by 65

Fabrication of Ce/N co-doped TiO2/diatomite granule catalyst and its improved visible-light-driven photoactivity

Chen, Y., & Liu, K. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.10.043 · Cited by 65

Activation of pyrolytic tire char with CO2: kinetic study

Murillo, R., Navarro, M. V., López, J. M., García, T., Callén, M. S., Aylón, E., & Mastral, A. M. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.12.005 · Cited by 65

3D printed catalytic converters with enhanced activity for low-temperature methane oxidation in dual-fuel engines

Hajimirzaee, S., & Doyle, A. M. (2020) · Fuel · doi:10.1016/j.fuel.2020.117848 · Cited by 65

Direct 3D Printing of Catalytically Active Structures

Manzano, J. S., Weinstein, Z. B., Sadow, A. D., & Slowing, I. I. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b02111 · Cited by 64

Biomimetic metal-organic nanoparticles prepared with a 3D-printed microfluidic device as a novel formulation for disulfiram-based therapy against breast cancer

Chang, Y., Jiang, J., Wu, C., Yang, W. L., Chen, L., Chen, P., Shen, J., Qian, S., Zhou, T., Wu, L., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100492 · Cited by 63

Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting

Ojuva, A., Järveläinen, M., Bauer, M., Keskinen, L., Valkonen, M., Akhtar, F., Levänen, E., & Bergström, L. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.03.001 · Cited by 61

Innovative 3D-manufacture of structured copper supports post-coated with catalytic material for CO2 methanation

Danaci, S., Protasova, L. N., Snijkers, F. M. M., Bouwen, W., Bengaouer, A., & Marty, P. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.03.023 · Cited by 60

Fluorine-containing polyimide/polysilsesquioxane carbon molecular sieve membranes and techno-economic evaluation thereof for C3H6/C3H8 separation

Shin, J. H., Yu, H. J., Park, J., Lee, A. S., Hwang, S. S., Kim, S., Park, S., Cho, K. Y., Won, W., & Lee, J. S. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117660 · Cited by 60

Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: Towards load-bearing applications

Lee, G., Carrillo, M., McKittrick, J. M., Martin, D. G., & Olevsky, E. A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101107 · Cited by 60

Customizable Heterogeneous Catalysts: Nonchanneled Advanced Monolithic Supports Manufactured by 3D-Printing for Improved Active Phase Coating Performance

Chaparro-Garnica, C. Y., Jordá-Faus, P., Bailón‐García, E., Ocampo‐Pérez, R., Aguilar-Madera, C. G., Davó‐Quiñonero, A., Lozano‐Castelló, D., & Bueno‐López, A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c14703 · Cited by 60

High-temperature interaction of vanadium pentoxide with H-ZSM-5 zeolite: ESR and IR study

Petráš, M., & Wichterlová, B. (1992) · The Journal of Physical Chemistry · doi:10.1021/j100183a056 · Cited by 60

Catalytic wet oxidation of phenol in a trickle bed reactor over a Pt/TiO2 catalyst

Maugans, C. B., & Akgerman, A. (2002) · Water Research · doi:10.1016/s0043-1354(02)00289-0 · Cited by 59

A conceptual framework and techno-economic analysis of a pelletization-gasification based bioenergy system

Pradhan, P., Gadkari, P., Mahajani, S. M., & Arora, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.129 · Cited by 59

Adsorption Kinetics and Dynamic Behavior of a Carbon Monolith

Brandani, F., Rouse, A., Brandani, S., & Ruthven, D. M. (2004) · Adsorption · doi:10.1023/b:adso.0000039866.37214.6a · Cited by 59

3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase

Agueniou, F., Vidal, H., López‐Castro, J. D. D., Hernández‐Garrido, J. C., Cauqui, M. A., Botana, F. J., Calvino, J. J., Galvita, V., & Gatica, J. M. (2020) · Catalysis Communications · doi:10.1016/j.catcom.2020.106181 · Cited by 58

Binderless zeolite monoliths production with sacrificial biopolymers

Lawson, S., Newport, K., Al‐Naddaf, Q., Ameh, A. E., Rownaghi, A. A., Petrik, L. F., & Rezaei, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128011 · Cited by 58

Kinetics of hydrogen iodide decomposition over activated carbon catalysts in pellets

Favuzza, P., Felici, C., Nardi, L., Tarquini, P., & Tito, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.032 · Cited by 55

Performance of an open thermal adsorption storage system with Linde type A zeolites: Beads versus honeycombs

Jänchen, J., Herzog, T. H., Gleichmann, K., Unger, B., Brandt, A., Fischer, G., & Richter, H. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.01.018 · Cited by 55

Synthesis of Cr, Cu, Ni, and Y-Doped 3D-Printed ZSM-5 Monoliths and Their Catalytic Performance for n -Hexane Cracking

Li, X., Alwakwak, A.-A., Rezaei, F., & Rownaghi, A. A. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00412 · Cited by 53

Multi-purpose structured catalysts designed and manufactured by 3D printing

Lind, A. M., Vistad, Ø. B., Sunding, M. F., Andreassen, K. A., Hafizovic, J., & Grande, C. A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108377 · Cited by 53

MOF immobilization on the surface of polymer-cordierite composite monoliths through in-situ crystal growth

Lawson, S., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.03.072 · Cited by 52

Performance Comparison of Metal–Organic Framework Extrudates and Commercial Zeolite for Ethylene/Ethane Separation

Pu, S., Wang, J., Li, L., Zhang, Z., Bao, Z., Yang, Q., Yang, Y., Xing, H., & Ren, Q. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04391 · Cited by 52

3D-printed HZSM-5 and 3D-HZM5@SAPO-34 structured monoliths with controlled acidity and porosity for conversion of methanol to dimethyl either

Magzoub, F., Li, X., Lawson, S., Rezaei, F., & Rownaghi, A. A. (2020) · Fuel · doi:10.1016/j.fuel.2020.118628 · Cited by 52

Carbon Hollow Fiber‐Supported Metal–Organic Framework Composites for Gas Adsorption

Lawson, S., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201700657 · Cited by 52

3D-Printed ZIF‑8 Monoliths for Biobutanol Recovery

Claessens, B., Dubois, N., Lefevere, J., Mullens, S., Cousin-Saint-Remi, J., & Denayer, J. F. M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00453 · Cited by 52

Production of MOF Adsorbent Spheres and Comparison of Their Performance with Zeolite 13X in a Moving-Bed TSA Process for Postcombustion CO2 Capture

Mondino, G., Spjelkavik, A. I., Didriksen, T., Krishnamurthy, S., Stensrød, R. E., Grande, C. A., Nord, L. O., & Blom, R. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b06387 · Cited by 48

Three-dimensional printing of porous carbon structures with tailorable pore sizes

Zhou, X., & Liu, C. (2018) · Catalysis Today · doi:10.1016/j.cattod.2018.05.044 · Cited by 47

Adsorption of Ethane and Ethylene over 3D-Printed Ethane-Selective Monoliths

Thakkar, H. V., Al‐Naddaf, Q., Legion, N., Hovis, M., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03685 · Cited by 46

3D Printing of Powder‐Based Inks into Functional Hierarchical Porous TiO2 Materials

Xu, C., Liu, T., Guo, W., Sun, Y., Liang, C., Cao, K., Guan, T., Liang, Z., & Jiang, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201901088 · Cited by 45

Structured Zeolite Monoliths with Ultrathin Framework for Fast CO2 Adsorption Enabled by 3D Printing

Zhang, H., Wang, P., Zhang, H., Yang, H., Wang, H., & Zhang, L. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b07060 · Cited by 45

A TSA process with indirect heating and cooling: parametric analysis and scaling-up to practical sizes

Bonjour, J., Clausse, M., & Meunier, F. E. (2005) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2005.01.002 · Cited by 39

A techno-economic evaluation of the hydrogen production for energy generation using an ethanol fuel processor

Moraes, T. S., da Silva, H. N. C., Zotes, L. P., Mattos, L. V., Borges, L. E. P., Farrauto, R. J., & Noronha, F. B. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.06.182 · Cited by 39

3D Printed Palladium Catalyst for Suzuki‐Miyaura Cross‐coupling Reactions

Bulatov, E., Lahtinen, E., Kivijärvi, L., Hey‐Hawkins, E., & Haukka, M. (2020) · ChemCatChem · doi:10.1002/cctc.202000806 · Cited by 39

Direct Ink Writing of Metal Oxide/H-ZSM-5 Catalysts for n -Hexane Cracking: A New Method of Additive Manufacturing with High Metal Oxide Loading

Lawson, S., Farsad, A., Rezaei, F., Ludlow, D. K., & Rownaghi, A. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20752 · Cited by 38

Analysis of dynamic CO2 capture over 13X zeolite monoliths in the presence of SOx , NOx and humidity

Al‐Naddaf, Q., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2020) · AIChE Journal · doi:10.1002/aic.16297 · Cited by 36

Design and development of 3D printed catalytically-active stirrers for chemical synthesis

Penny, M. R., & Hilton, S. T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00492k · Cited by 35

3D-printed zeolite monoliths with hierarchical porosity for selective methanol to light olefin reaction

Li, X., Rezaei, F., & Rownaghi, A. A. (2018) · Reaction Chemistry & Engineering · doi:10.1039/c8re00095f · Cited by 35

Towards the preparation of binderless ZSM-5 zeolite catalysts: the crucial role of silanol nests

Li, Z., Jiang, X., Xiong, G., Nie, B., Liu, C., He, N., & Liu, J. (2020) · Catalysis Science & Technology · doi:10.1039/d0cy01289k · Cited by 34

Optimal design of engineered gas adsorbents: Pore-scale level

Rezaei, F., & Webley, P. A. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.10.039 · Cited by 31

Experimental and theoretical determination of the particle size of hydrotreating catalysts of different shapes

Ancheyta, J., Muñoz, J. A. D., & Macias, M. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.08.009 · Cited by 31

Integrating Reactors and Catalysts through Three‐Dimensional Printing: Efficiency and Reusability of an Impregnated Palladium on Silica Monolith in Sonogashira and Suzuki Reactions

Díaz-Marta, A. S., Yáñez, S., Lasorsa, E., Pacheco, P., Tubio, C. R., Rivas, J. M., Piñeiro, Y., Gómez, M. A. G., Amorín, M., Guitián, F., et al. (2020) · ChemCatChem · doi:10.1002/cctc.201902143 · Cited by 31

3D Printing of Structured Nanotitania Catalysts: A Novel Binder-Free and Low-Temperature Chemical Sintering Method

Ugarteburu, A. E., & Casanova, I. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0164 · Cited by 30

Monoliths with MFI zeolite layers prepared with the assistance of 3D printing: Characterization and performance in the gas phase isomerization of α-pinene

Hędrzak, E., Węgrzynowicz, A., Rachwalik, R., Sulikowski, B., & Michorczyk, P. (2019) · Applied Catalysis A General · doi:10.1016/j.apcata.2019.04.017 · Cited by 29

Direct 3D Printing of Reactive Agitating Impellers for the Convenient Treatment of Various Pollutants in Water

Sun, X., Yan, Y., Zhang, L., Ma, G., Liu, Y., Yu, Y., An, Q., & Tao, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701626 · Cited by 29

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

Lawson, S., Farsad, A., Adebayo, B. O., Newport, K., Schueddig, K., Lowrey, E., Polo‐Garzon, F., Rezaei, F., & Rownaghi, A. A. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000257 · Cited by 29

Additive manufacturing of ceramic nanopowder by direct coagulation printing

Hensen, T. J., Aguirre, T. G., Cramer, C. L., Wand, A. S., Ma, K., Prawel, D. A., Williams, J. D., & Holland, T. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.010 · Cited by 23

High Throughput Screening of 3D Printable Resins: Adjusting the Surface and Catalytic Properties of Multifunctional Architectures

Manzano, J. S., Wang, H., & Slowing, I. I. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00598 · Cited by 22

Reduction of Electric Power Consumption in CO2-PSA with Zeolite 13X Adsorbent

Shigaki, N., Mogi, Y., Haraoka, T., & Sumi, I. (2018) · Energies · doi:10.3390/en11040900 · Cited by 22

Modeling of cryo-adsorption of hydrogen on MOF-5 pellets: Effect of pellet properties on moderate pressure refueling

Ortmann, J. P., & Kaisare, N. S. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.10.138 · Cited by 20

Intrinsic Thermal Desorption in a 3D Printed Multifunctional Composite CO2 Sorbent with Embedded Heating Capability

Thompson, J. F., Bellerjeau, C., Marinick, G., Osio‐Norgaard, J., Evans, A., Carry, P., Street, R. A., Petit, C., & Whiting, G. L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14111 · Cited by 19

Enhanced Mass Transfer and Improved Catalyst Recovery in a Stirred Reactor by Polymeric Ionic Liquids Modified 3D Printed Devices

Wu, J., Yan, Y., Zhang, L., Qin, Z., & Tao, S. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800515 · Cited by 19

Effect of the degree of substitution in the transition temperatures and hydrophobicity of hydroxypropyl cellulose esters

López‐Velázquez, D., Hernández-Sosa, A. R., & Pérez, E. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.086 · Cited by 17

Shaped binderless ZSM-11 zeolite catalyst prepared via a dry-gel conversion method: Characterization and application for alkylation of benzene with dimethyl ether

Zhang, W., Zhang, S., Xin, W., Liu, H., Shang, Y., Zhu, X., Liu, S., & Xu, L. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.12.008 · Cited by 17

Origin and Abatement of Heterogeneity at the Support Granule Scale of Silver on Silica Catalysts

Plessers, E., van den Reijen, J. E., de Jongh, P. E., de Jong, K. P., & Roeffaers, M. B. J. (2017) · ChemCatChem · doi:10.1002/cctc.201700753 · Cited by 17

Separation and enrichment of CH4 and CO2 from a dry biogas using a thermally regenerative adsorbent-packed heat exchanger

Zainol, N. I., Osaka, Y., Tsujiguchi, T., Kumita, M., & Kodama, A. (2019) · Adsorption · doi:10.1007/s10450-019-00018-4 · Cited by 17

Photocatalytic reaction intensification using monolithic supports designed by stereolithography

Furman, M., Corbel, S., Wild, G., & Zahraa, O. (2009) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2009.11.002 · Cited by 16

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

Liu, X., Li, Y., Xue, W., Sun, J., & Tang, Q. (2018) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-018-1615-6 · Cited by 15

Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle

Zare, M., & Hashemabadi, S. H. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2013.02.010 · Cited by 15

Study on the Printability through Digital Light Processing Technique of Ionic Liquids for CO2 Capture

Gillono, M., Chiappone, A., Mendola, L., Gomez, M. G., Scaltrito, L., Pirri, C. F., & Roppolo, I. (2019) · Polymers · doi:10.3390/polym11121932 · Cited by 15

Investigation on Long Term Operation of Thermochemical Heat Storage with MgO-Based Composite Honeycombs

Lee, J., Yim, T., Kim, H. J., Hong, S. K., Seo, D.-W., & Kim, H. S. (2019) · Energies · doi:10.3390/en12071262 · Cited by 15

Directly Printed Oxide/ZSM-5 Bifunctional Catalysts for Methanol Conversion to Dimethyl Ether with Exceptional Stability, Conversion, and Selectivity

Magzoub, F., Lawson, S., Rezaei, F., & Rownaghi, A. A. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04279 · Cited by 14

Modelling of gas interstitial velocity radial distribution over cross-section of a tube packed with granular catalyst bed; effects of granule shape and of lateral gas mixing

Ziółkowska, I., & Ziółkowski, D. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.029 · Cited by 12

Tailored catalyst pellet specification for improved fixed-bed transport characteristics: A shortcut method for the model-based reactor design

Pietschak, A., Kaiser, M., & Freund, H. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2018.06.043 · Cited by 12

3D printed microchannel loaded with hematite nanoadsorbent for fluoride removal from water

Patel, R. K., Chawla, A. K., Loulergue, P., Teychene, B., & Pandey, J. K. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.07.061 · Cited by 11

Fabrication of 3D photocatalytic α- Fe 2 O 3 structure using direct ink writing method

Li, Y., Li, B., & Li, L. (2014) · Modern Physics Letters B · doi:10.1142/s0217984914500511 · Cited by 10

Preparation of binderless honeycomb silicalite-1 monolith by using bundled palm fibers as template

Xu, J., Yao, J., Zeng, C., Zhang, L., & Xu, N. (2009) · Journal of Porous Materials · doi:10.1007/s10934-009-9296-1 · Cited by 9

Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties

Manzano, J. S., Wang, H., Qi, L. H., & Slowing, I. I. (2019) · Applied Catalysis A General · doi:10.1016/j.apcata.2020.117794 · Cited by 9

Recent advances in direct air capture by adsorption

Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 464

Ionic Liquids Functionalized MOFs for Adsorption

Li, X., Chen, K., Guo, R., & Wei, Z. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00248 · Cited by 410

A robust and 3D-printed solar evaporator based on naturally occurring molecules

Zhang, X., Yu, Y., Li, N., Yang, P., Yang, Y., Duan, G., Wang, X., Li, Y., & Li, Y. (2023) · 中国科学通报：英文版 · doi:10.1016/j.scib.2023.01.017 · Cited by 186

Understanding Synthesis–Structure–Performance Correlations of Nanoarchitectured Activated Carbons for Electrochemical Applications and Carbon Capture

Zhang, S., Zheng, M., Tang, Y., Zang, R., Zhang, X., Huang, X., Chen, Y., Yamauchi, Y., Kaskel, S., & Pang, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204714 · Cited by 180

Synthesis and shaping of metal–organic frameworks: a review

Li, Y., Wen, G., Li, J., Li, Q., Zhang, H., Tao, B., & Zhang, J. (2022) · Chemical Communications · doi:10.1039/d2cc04190a · Cited by 161

Shaping of Metal–Organic Frameworks: A Review

Wang, Z., Liu, L., Li, Z., Goyal, N., Du, T., He, J., & Li, G. K. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c03426 · Cited by 159

Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review

George, S. M., Nayak, C., Singh, I., & Balani, K. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00140 · Cited by 157

Evaluation of amine-based solid adsorbents for direct air capture: a critical review

Panda, D., Kulkarni, V., & Singh, S. K. (2022) · Reaction Chemistry & Engineering · doi:10.1039/d2re00211f · Cited by 115

3D printing of hydrogels for flexible micro‐supercapacitors

Baig, M. M., Khan, S. A., Ahmad, H., Liang, J., Zhu, G., Pang, H., & Zhang, Y. (2024) · FlexMat. · doi:10.1002/flm2.14 · Cited by 111

Binder-free Three-dimensional (3D) printing of Cellulose-ZIF8 (CelloZIF-8) for water treatment and carbon dioxide (CO2) adsorption

Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143567 · Cited by 108

3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications

Molavi, H., Mirzaei, K., Barjasteh, M., Rahnamaee, S. Y., Saeedi, S., Hassanpouryouzband, A., & Rezakazemi, M. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01487-1 · Cited by 107

Recent advances and challenges in solid sorbents for CO2 capture

Zentou, H., Hoque, B., Abdalla, M. A., Saber, A. F., Abdelaziz, O. Y., Aliyu, M., Alkhedhair, A. M., Alabduly, A. J., & Abdelnaby, M. M. (2025) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2025.100386 · Cited by 98

Recent advances in environmental and agricultural applications of hydrochars: A review

Al-Nuaimy, M. N. M., Azizi, N., Nural, Y., & Yabalak, E. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117923 · Cited by 94

3D Printing Flexible Sodium‐Ion Microbatteries with Ultrahigh Areal Capacity and Robust Rate Capability

Ma, J., Zheng, S., Chi, L., Liu, Y., Zhang, Y., Wang, K., & Wu, Z. (2022) · Advanced Materials · doi:10.1002/adma.202205569 · Cited by 88

Shaping techniques of adsorbents and their applications in gas separation: a review

Wu, J., Zhu, X., Yang, F., Wang, R. Z., & Ge, T. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta04352a · Cited by 88

An Overview on 3D Printing of Structured Porous Materials and Their Applications

Gao, Y., Lalevée, J., & Simon‐Masseron, A. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300377 · Cited by 88

Structural Engineering of Hierarchical Zeolite-Based Catalysts

Wei, Y., Feng, J., Guan, B., & Yu, J. (2024) · Accounts of Materials Research · doi:10.1021/accountsmr.4c00076 · Cited by 88

Fabrication of metal-organic framework architectures with macroscopic size: A review

Fonseca, J., & Gong, T. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214520 · Cited by 82

Recent advances in ink-based additive manufacturing for porous structures

Guo, Z., & Zhou, C. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102405 · Cited by 75

Utilizing graphene oxide in cementitious composites: A systematic review

Murali, M., Alaloul, W. S., Mohammed, B. S., Musarat, M. A., Salaheen, M. A., Al-Sabaeei, A. M., & Abdulkadir, I. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01359 · Cited by 75

3D printing of metal–organic framework composite materials for clean energy and environmental applications

Kearns, E. R., Gillespie, R., & D’Alessandro, D. M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08777k · Cited by 70

Enhancement of wastewater treatment performance using 3D printed structures: A major focus on material composition, performance, challenges, and sustainable assessment

Saidulu, D., Srivastava, A., & Gupta, A. K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.114461 · Cited by 70

3D-printed zeolite 13X gyroid monolith adsorbents for CO2 capture

Jivrakh, K. B., Varghese, A. M., Ehrling, S., Reddy, K. S. K., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154674 · Cited by 70

3D-printed titanium-based ionic sieve monolithic adsorbent for selective lithium recovery from salt lakes

Yu, J., Zhu, J., Luo, G., Chen, L., Li, X., Cui, P., Wu, P., Chao, Y., Zhu, W., & Liu, Z. (2023) · Desalination · doi:10.1016/j.desal.2023.116651 · Cited by 68

Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO 2 Adsorption and Water Treatment

Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13966 · Cited by 65

3D-Printed photocatalysts for revolutionizing catalytic conversion of solar to chemical energy

Lin, H., Ma, M., Qi, H., Wang, X., Xing, Z., Alowasheeir, A., Tang, H., Jun, S. C., Yamauchi, Y., & Liu, S. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101427 · Cited by 65

Engineering metal–organic frameworks for adsorption-based gas separations: from process to atomic scale

Taddei, M., & Petit, C. (2021) · Molecular Systems Design & Engineering · doi:10.1039/d1me00085c · Cited by 64

Cold Temperature Direct Air CO 2 Capture with Amine-Loaded Metal–Organic Framework Monoliths

Wang, Y., Rim, G., Song, M., Holmes, H. E., Jones, C. W., & Lively, R. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13528 · Cited by 64

3D printing in photocatalysis: Methods and capabilities for the improved performance

Aguirre-Cortés, J. M., Moral-Rodríguez, A. I., Bailón‐García, E., Davó‐Quiñonero, A., Pérez‐Cadenas, A. F., & Carrasco-Marı́n, F. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101831 · Cited by 63

MOF/POM hybrids as catalysts for organic transformations

Maru, K., Kalla, S., & Jangir, R. (2022) · Dalton Transactions · doi:10.1039/d2dt01895k · Cited by 62

Adsorbent technologies and applications for carbon capture, and direct air capture in environmental perspective and sustainable climate action

Ayeleru, O. O., Modekwe, H. U., Onisuru, O. R., Ohoro, C. R., Akinnawo, C. A., & Olubambi, P. A. (2023) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2023.100029 · Cited by 63

The analysis and evaluation of direct air capture adsorbents on the material characterization level

Wu, J., Zhu, X., Chen, Y., Wang, R. Z., & Ge, T. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137958 · Cited by 58

Low-concentration CO 2 capture using metal–organic frameworks – current status and future perspectives

Åhlén, M., Cheung, O. Y. H., & Xu, C. (2023) · Dalton Transactions · doi:10.1039/d2dt04088c · Cited by 58

A review of adsorption materials and their application of 3D printing technology in the separation process

Yu, J., Zhu, J., Chen, L., Chao, Y., Zhu, W., & Liu, Z. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146247 · Cited by 58

Water based adsorption thermal battery: Sorption mechanisms and applications

Zeng, Z., Zhao, B., & Wang, R. Z. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.11.024 · Cited by 56

Metal–organic frameworks for biomedical applications: bridging materials science and regenerative medicine

Nasri, N., Azad, M., Mehrabi, Z., Dini, G., & Marandi, A. (2025) · RSC Advances · doi:10.1039/d5ra05337d · Cited by 56

Electrical swing adsorption on 3D-printed activated carbon monoliths for CO2 capture from biogas

Verougstraete, B., Schoukens, M., Sutens, B., Haute, N. V., Vos, Y. D., Rombouts, M., & Denayer, J. F. M. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121660 · Cited by 55

Coaxial 3D Printing of Zeolite‐Based Core–Shell Monolithic Cu‐SSZ‐13@SiO2 Catalysts for Diesel Exhaust Treatment

Wei, Y., Wang, S., Chen, M., Han, J., Yang, G., Wang, Q., Di, J., Li, H., Wu, W., & Yu, J. (2023) · Advanced Materials · doi:10.1002/adma.202302912 · Cited by 54

Mind the Gap: The Role of Mass Transfer in Shaped Nanoporous Adsorbents for Carbon Dioxide Capture

Verstreken, M. F. K., Chanut, N., Magnin, Y., Landa, H. O. R., Denayer, J. F. M., Baron, G. V., & Ameloot, R. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c03086 · Cited by 53

Structural and functional tailoring of interfacial solar evaporators using 3D printing

Zhang, X., Wang, J., Wang, X., Xu, Y., & Li, Y. (2025) · Materials Today · doi:10.1016/j.mattod.2025.01.011 · Cited by 53

Additive manufacturing for adsorption‐related applications—A review

Pereira, A., Ferreira, A. F. P., Rodrigues, A. E., Ribeiro, A. M., & Regufe, M. J. (2021) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10108 · Cited by 52

Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification

Rosseau, L. R. S., Middelkoop, V., Willemsen, H. A. M., Roghair, I., & Annaland, M. V. S. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.834547 · Cited by 51

Recent advances in intermediate-temperature CO2 capture: Materials, technologies and applications

Zhao, C., Wang, L., Huang, L., Musyoka, N. M., Xue, T., Rabeah, J., & Wang, Q. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.11.024 · Cited by 50

Integrated direct air capture and oxidative dehydrogenation of propane with CO2 at isothermal conditions

Lawson, S., Baamran, K. S., Newport, K., Alghamadi, T., Jacobs, G., Rezaei, F., & Rownaghi, A. A. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120907 · Cited by 49

Facile synthesis of structured adsorbent with enhanced hydrophobicity and low energy consumption for CO2 capture from the air

Wu, J., Chen, Y., Xu, Y., Chen, S., Lv, H., Gan, Z., Zhu, X., Wang, R. Z., Wang, C., & Ge, T. (2023) · Matter · doi:10.1016/j.matt.2023.10.019 · Cited by 49

Recent Advances in Carbon-Based Adsorbents for Adsorptive Separation of Light Hydrocarbons

Wang, Y., Zhang, X., Ba, Y., Li, T.-Y., Hao, G., & Lu, A. (2022) · Research · doi:10.34133/2022/9780864 · Cited by 47

Evaluation of the Potential of a 3d-Printed Hybrid Zeolite 13x/Activated Carbon Material for Co2/N2 Separation Using Electric Swing Adsorption

Pereira, A., Ferreira, A. F. P., Rodrigues, A. E., Ribeiro, A. M., & Regufe, M. J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138197 · Cited by 47

Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66

Alghamdi, T., Aina, P. O., Rownaghi, A. A., & Rezaei, F. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05821 · Cited by 45

Effects of Process Parameters on CO2/H2 Separation Performance of 3D-Printed MOF-74 Monoliths

Lawson, S., & Rezaei, F. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c03443 · Cited by 44

3D-printed structured catalysts for CO2 methanation reaction: Advancing of gyroid-based geometries

González‐Castaño, M., Baena‐Moreno, F. M., de Miguel, J. C. N., Miah, K. U. M., Torralvo, F. A., Ossenbrink, R., Odriozola, J. A., Benzinger, W., Hensel, A., Wenka, A., et al. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115464 · Cited by 43

Adsorbent shaping as enabler for intensified pressure swing adsorption (PSA): A critical review

Chisăliță, D.-A., Boon, J., & Lücking, L. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128466 · Cited by 41

Vat polymerization-based 3D printing of nanocomposites: A mini review

Li, Y., Wang, W., Wu, F., & Kankala, R. K. (2023) · Frontiers in Materials · doi:10.3389/fmats.2022.1118943 · Cited by 41

Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming

Li, C., Yuan, S., Yao, X., Yu, X., Li, B., & Tu, S. (2023) · Fuel · doi:10.1016/j.fuel.2023.128367 · Cited by 40

Advances in vat photopolymerization 3D printing: Multifunctional materials, process innovations, and emerging applications

Khan, K., Hussain, M. I., Tareen, A. K., Ali, A., Hamza, M., & Chen, Z. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101120 · Cited by 39

Formulation and processing of dual functional Adsorbent/Catalyst structured monoliths using an additively manufactured contactor for direct Capture/Conversion of CO2 with cogeneration of ethylene

Lawson, S., Baamran, K. S., Newport, K., Rezaei, F., & Rownaghi, A. A. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133224 · Cited by 39

Assessment of CO2/CH4 Separation Performance of 3D-Printed Carbon Monoliths in Pressure Swing Adsorption

Lawson, S., Al‐Naddaf, Q., Newport, K., Rownaghi, A. A., & Rezaei, F. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01741 · Cited by 38

3D printed degradable hydrogel evaporator for high-efficiency, environmental-friendly solar alkaline-water evaporation

Hu, M., Wu, C., Xie, Q., Yu, J., Guo, Y., Shuai, Y., Wang, X., & Wang, Z. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156132 · Cited by 37

3D printing of TiO2 nano particles containing macrostructures for As(III) removal in water

Wang, D., Zhi, T., Liu, L., Li, Y., Yan, W. Q., Tang, Y., He, B., Hu, L., Jing, C., & Jiang, G. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.152754 · Cited by 37

Process evaluation and kinetic analysis of 3D-printed monoliths comprised of CaO and Cr/H-ZSM-5 in combined CO2 Capture-C2H6 oxidative dehydrogenation to C2H4

Baamran, K. S., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.134706 · Cited by 36

A critical review on 3D-printed adsorbents, membranes, and catalysts for carbon dioxide capture, separation, and conversion

Jivrakh, K. B., Reddy, K. S. K., Dumée, L. F., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143522 · Cited by 35

Zeolite-coated 3D-printed gyroid scaffolds for carbon dioxide adsorption

Jivrakh, K. B., Reddy, K. S. K., Taher, S. E., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127523 · Cited by 34

3D printing enhanced catalysis for energy conversion and environment treatment

Chen, J., Wu, P., Bu, F., Gao, Y., Liu, X., & Guan, C. (2023) · DeCarbon · doi:10.1016/j.decarb.2023.100019 · Cited by 34

Screening of Adsorbent/Catalyst Composite Monoliths for Carbon Capture-Utilization and Ethylene Production

Lawson, S., Baamran, K. S., Newport, K., Rezaei, F., & Rownaghi, A. A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c17668 · Cited by 33

Adsorption film with sub-milli-interface morphologies via direct ink writing for indoor formaldehyde removal

Chen, Q., Tian, E., Luo, Z., & Mo, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128190 · Cited by 33

Adsorption-Enhanced Bifunctional Catalysts for In Situ CO2 Capture and Utilization in Propylene Production: A Proof-Of-Concept Study

Lawson, S., Baamran, K. S., Newport, K., Garcia, E. S., Jacobs, G., Rezaei, F., & Rownaghi, A. A. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c04455 · Cited by 33

Review and Perspectives of Monolithic Metal–Organic Frameworks: Toward Industrial Applications

Yu, X., Li, B., Wu, L., Shi, D., & Han, S. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00858 · Cited by 32

Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas‐Phase Adsorption and Catalysis

Chen, Q., Tian, E., Wang, Y., Mo, J., Xu, G., & Zhu, M. (2023) · Small Methods · doi:10.1002/smtd.202201302 · Cited by 32

3D printing synthesis of catalysts

Zhao, X., Karakaya, C., Qian, M., Zou, R., Zhang, W., Lü, Z., Maiti, D., Samanta, A., Wan, W., Liu, X., et al. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100746 · Cited by 31

3D printing of poly(ethyleneimine)-functionalized Mg-Al mixed metal oxide monoliths for direct air capture of CO2

Shao, Q., Gan, Z., Ge, B., Liu, X., Chen, C., O'Hare, D. M., & Zhu, X. (2024) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.05.015 · Cited by 31

3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol

Salazar-Aguilar, A. D., Quintanilla, A., López, P., Martínez, C., Vega-Díaz, S. M., Casas, J. A., Miranzo, P., Osendi, M. I., & Belmonte, M. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c19755 · Cited by 31

Phosphor-Enhanced, Visible-Light-Storing g-C3N4/Ag3PO4/SrAl2O4:Eu2+,Dy3+ Photocatalyst Immobilized on Fractal 3D-Printed Supports

Lei, L., Wang, D., Kang, Y., de Mimérand, Y. D. R., Jin, X., & Guo, J. Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c23650 · Cited by 31

Direct Ink 3D Printing of Porous Carbon Monoliths for Gas Separations

Comroe, M. L., Kołasiński, K. W., & Saha, D. (2022) · Molecules · doi:10.3390/molecules27175653 · Cited by 31

Tailoring 3D Printed Micro‐Structured Carbons for Adsorption

Scott, S., Chew, Y. M. J., Barnard, J. E., Burrows, A. D., Smith, M. W., Tennison, S., & Perera, S. P. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213715 · Cited by 30

3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production

Feng, J., Wei, Y., Li, X., Wang, Q., Wang, B., Guo, Y., Feng, B., Jin, E., & Yu, J. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202508226 · Cited by 30

3D printing of hierarchically porous monolithic TS‐1 catalyst for one-pot synthesis of ethylene glycol

Huo, C., Tian, X., Yang, N., Qiu, Z., Zhong, Q., Huang, X., & Li, D. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138259 · Cited by 30

Magnetic-Field Assisted Gas Desorption from Fe2O3/Zeolite 13X Sorbent Monoliths for Biogas Upgrading

Newport, K., Baamran, K. S., Rownaghi, A. A., & Rezaei, F. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c02969 · Cited by 30

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al2O3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Liu, J., Zhu, J., Zhu, J. T., Xu, J., Liu, H., Hua, M., Cheng, H., Li, H., Liu, J., Zhu, W., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05620 · Cited by 30

Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer

Jiang, J., Nikbin, E., Liu, Y., Lei, S., Ye, G., Howe, J. Y., Manners, I., & Winnik, M. A. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c09791 · Cited by 30

A 3D-printed CuNi alloy catalyst with a triply periodic minimal surface for the reverse water-gas shift reaction

Li, W., Ding, J., Chen, X., Wang, Y., Song, X., & Zhang, S. M. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta05845j · Cited by 28

Unveiling the Power of Proximity of Prevalent Fe-Based Tandem Catalysts in CO 2 Hydrogenation via Modified Fischer–Tropsch: Crucial Relations toward Industrialization

Najari, S., Saeidi, S., Sápi, A., Kónya, Z., & Somorjai, G. A. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00697 · Cited by 28

In situ crystal engineering on 3D-printed woodpile scaffolds: a monolith catalyst with highly accessible active sites for enhanced catalytic cracking

Wang, R., Gong, Y., Wang, P., He, W., Ye, S., Xin, M., Jiang, Q., Sha, Y., Cao, T., Song, H., et al. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta01645e · Cited by 28

Surface Chemical Engineering of a Metal 3D-Printed Flow Reactor Using a Metal–Organic Framework for Liquid-Phase Catalytic H 2 Production from Hydrogen Storage Materials

Mori, K., Fujita, T., Hata, H., Kim, H.-J., Nakano, T., & Yamashita, H. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10945 · Cited by 27

From breakup to coiling and buckling regimes in buoyant viscoplastic injections

Akbari, S., & Taghavi, S. M. (2022) · Journal of Fluid Mechanics · doi:10.1017/jfm.2022.254 · Cited by 27

3D-printed heterogeneous Cu2O monoliths: Reusable supports for antibiotic treatment of wastewater

Xie, Y., Yu, Y., Xie, H., Huang, F., & Hughes, T. C. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.129170 · Cited by 27

A scalable solar-based adsorption thermal battery for day and night heating in a low-carbon scenario

Zeng, Z., Yang, X., Zhao, B., Chen, Z., Chua, K. J., & Wang, R. Z. (2023) · Energy & Environmental Science · doi:10.1039/d3ee03519k · Cited by 27

Kinetic and mechanistic way for photocatalytic degradation of pollutants from textile wastewater by graphene oxide supported nanocomposite

Das, A., & Adak, M. K. (2024) · Next Materials · doi:10.1016/j.nxmate.2024.100153 · Cited by 27

Scalable 3D ‐printed lattices for pressure control in fluid applications

Woodward, I. R., Attia, L., Patel, P. P., & Fromen, C. A. (2021) · AIChE Journal · doi:10.1002/aic.17452 · Cited by 26

Polymer–Nickel Composite Filaments for 3D Printing of Open Porous Materials

Mackiewicz, E., Wejrzanowski, T., Adamczyk‐Cieślak, B., & Oliver, G. J. (2022) · Materials · doi:10.3390/ma15041360 · Cited by 26

Advances in Designing 3D‐Printed Systems for CO2 Reduction

Padinjareveetil, A. K. K., & Pumera, M. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202201734 · Cited by 26

3D‐printed green and low‐cost porous g‐C 3 N 4 /geopolymer components for the removal of methylene blue from wastewater

Liu, X., Ma, S., Yang, H., He, P., Duan, X., Jia, D., Colombo, P., & Zhou, Y. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.19654 · Cited by 26

DLP 3D printing of alumina catalyst architectures: Design, kinetics and modeling of structure effects on catalyst performance

Mastroianni, L., Ferrer, A. D. J. M., Domenico, A. M. D., Eränen, K., Serio, M. D., Murzin, D. Y., Russo, V., & Salmi, T. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157691 · Cited by 25

Chitosan-polylactic acid composites: from seafood waste to advanced functional materials for 3D printing

Blanzeanu, E., Marin, M. M., Verziu, M. N., Dumitru, A., Vasile, B. Ş., Stavarache, C. E., Cozorici, D., Luque, R., Zaharia, C., & Radu, I. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01131-x · Cited by 25

Rotary-angle 3D printing multilayer membrane dead-end filtration for rapid and highly efficient water treatment

Ju, Y., Zhang, J., Cai, Q., Zhang, Z., Zhao, Y., Cui, J., Hou, R., Wei, Y., Liang, Z., & Chen, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139969 · Cited by 25

CVD nanocrystalline multilayer graphene coated 3D-printed alumina lattices

Ramírez, C., Shamshirgar, A. S., Pérez-Coll, D., Osendi, M. I., Miranzo, P., Tewari, G. C., Karppinen, M. J., Hussainova, I., & Belmonte, M. (2022) · Carbon · doi:10.1016/j.carbon.2022.10.085 · Cited by 25

3D printed SrNbO 2 N photocatalyst for degradation of organic pollutants in water

Iborra-Torres, A., Huš, M., Nguyen, K. G., Vamvakeros, A., Sajjad, M. T., Dunn, S., Mertens, M., Jacques, S. D. M., Beale, A. M., Likozar, B., et al. (2023) · Materials Advances · doi:10.1039/d2ma01076c · Cited by 25

Functionalization of recycled polymer and 3D printing into porous structures for selective recovery of copper from copper tailings

Ibebunjo, K., Ouardi, Y. E., Bediako, J. K., Iurchenkova, A. A., & Repo, E. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119664 · Cited by 25

Exploring the 3D printing of molybdenum carbide-based catalysts for the reverse water gas shift reaction: A multi scale study

Pajares, A., Andrade‐Arvizu, J., Jain, D., Monai, M., Lefevere, J., de la Piscina, P. R., Homs, N., & Michielsen, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149048 · Cited by 25

Recent Advances in the Development of Highly Conductive Structured Supports for the Intensification of Non-adiabatic Gas-Solid Catalytic Processes: The Methane Steam Reforming Case Study

Balzarotti, R., Ambrosetti, M., Beretta, A., Groppi, G., & Tronconi, E. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2021.811439 · Cited by 24

Porous 3D Printable Hydrogels

Baur, E., Hirsch, M., & Amstad, E. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201763 · Cited by 24

3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations

Ling, B., Agrawal, R., He, D., Poole, R. J., Cooper, A. I., Liu, M., & García‐Tuñón, E. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202405320 · Cited by 24

An Overview on 3D Printing of Structured Porous Materials and Their Applications

Gao, Y., Lalevée, J., & Simon‐Masseron, A. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300377 · Cited by 88

Three-Dimensionally Printed Catalytic Structures

Marchenkova, M. A., Gadzhiev, J. K., Guda, A. A., Soldatov, A. V., & Chapek, S. V. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9110372 · Cited by 5

A review of adsorption materials and their application of 3D printing technology in the separation process

Yu, J., Zhu, J., Chen, L., Chao, Y., Zhu, W., & Liu, Z. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146247 · Cited by 58

Additive manufacturing of high-performance adsorbents for environmental use

Zheng, A. L. T., Teo, E. Y. L., Marzuki, O. F., Koo, L. F., Wong, T. J., Chung, E. L. T., & Andou, Y. (2025) · Engineering Research Express · doi:10.1088/2631-8695/adfacc · Cited by 11

Catalytic Materials by 3D Printing: A Mini Review

Chen, L., Zhou, S., Li, M., Mo, F., Yu, S., & Wei, J. (2022) · Catalysts · doi:10.3390/catal12101081 · Cited by 38