The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
A magnetically recyclable chitosan composite adsorbent functionalized with EDTA for simultaneous capture of anionic dye and heavy metals in complex wastewater
Abstract
Abstract Ascribing to their significant differences in physicochemical properties, it is extremely challenging to treat complex wastewater containing more than one class of pollutants via one-step treatment. Here, we focused on disposal of complex wastewater bearing organic dye and heavy metal by using adsorptive method. Thus, we successfully fabricated a novel and versatile EDTA functionalized magnetic chitosan composite adsorbent (Fe3O4-CS/EDTA) for simultaneous removal of methyl blue(MB) and heavy metal (Pb(II) and Cu(II)) from complex wastewater. In this setting, EDTA chelating groups are mainly responsible for the binding of heavy metals, while the protonated amino groups of CS adsorb anionic dyes through electrostatic interaction, thus enabling the simultaneous capture of these two classes of pollutants. In mono-pollutant system, the resulting material showed prominent uptake ability toward MB, Pb(II), and Cu(II) with uptake characteristics of pseudo-second-order model and Langmuir isotherm equation. The maximum monolayer uptake capacities were determined to be 225.0 mg g−1 of Cu(II), 220.0 mg g−1 of Pb(II), and 459.9 mg g−1 of MB at 303 K, respectively. More interestingly, in metal-MB binary system, uptake of MB was almost not affected by coexisting metal. While the uptake capacity of Cu(II) or Pb(II) was enhanced with increasing of MB concentration. These results demonstrated the synergetic removal performance of as-designed adsorbent toward cationic metal ions and anionic dye. Moreover, as-resulting adsorbent showed no significant adsorption capacity loss even after 8 runs of sorption-desorption cycle, manifesting that it is of great stability and could be regarded as a promising candidate adsorbent for treating complex wastewater. This study provides some insights into the design of highly efficient adsorbents with spatially separated sorption sites for disposing complex wastewater bearing organic and metallic contaminants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Li, J., Fan, Q., Wu, Y., Wang, X., Chen, C., Tang, Z., & Wang, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09132b · Cited by 273
RetractedMonodisperse Magnetic Single‐Crystal Ferrite Microspheres
Deng, H., Li, X., Peng, Q., Wang, X., Chen, J., & Li, Y. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462551 · Cited by 2,006
ALDEGS, Y., ELBARGHOUTHI, M., ELSHEIKH, A., & WALKER, G. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2007.03.001 · Cited by 1,292
Fu, J., Chen, Z., Wang, M., Liu, S., Zhang, J., Zhang, J., Han, R., & Xu, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.101 · Cited by 1,096
Wang, J., Zheng, S., Shao, Y., Liu, J., Xu, Z., & Zhu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.05.010 · Cited by 1,062
Ma, J., Yu, F., Zhou, L., Jin, L., Yang, M., Luan, J., Tang, Y., Fan, H., Yuan, Z., & Chen, J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301053m · Cited by 746
Cui, L., Wang, Y., Gao, L., Hu, L., Yan, L., Wei, Q., & Du, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.043 · Cited by 716
Fan, L., Luo, C., Li, X., Lu, F., Qiu, H., & Sun, M. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.02.068 · Cited by 642
Deng, J.-H., Zhang, X.-R., Zeng, G.-M., Gong, J.-L., Niu, Q.-Y., & Liang, J. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.045 · Cited by 638
Hao, Y.-M., Man, C., & Hu, Z.-B. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.08.048 · Cited by 601
Li, Z., Wang, L., Meng, J., Liu, X., Xu, J., Wang, F., & Brookes, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.09.036 · Cited by 594
Ren, Y., Abbood, H. A., He, F., Peng, H., & Huang, K. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.059 · Cited by 570
Preparation and properties of magnetic Fe3O4–chitosan nanoparticles
Li, G.-Y., Jiang, Y.-R., Huang, K.-L., Ding, P., & Chen, J. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.11.100 · Cited by 523
Zhao, F., Repo, E., Yin, D., Meng, Y., Jafari, S., & Sillanpää, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02227 · Cited by 508
Repo, E., Warchol, J. K., Kurniawan, T. A., & Sillanpää, M. E. T. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.030 · Cited by 450
Zhou, Q., Liao, B., Lin, L., Qiu, W., & Song, Z. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.09.220 · Cited by 397
Annadurai, G., Ling, L. Y., & Lee, J.-F. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.07.002 · Cited by 369
Wu, T., Cai, X., Tan, S., Li, H., Liu, J., & Yang, W. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.050 · Cited by 352
Removal of Congo red dye from aqueous solution with hydroxyapatite/chitosan composite
Hou, H., Zhou, R., Wu, P., & Wu, L. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.09.100 · Cited by 322
Study on the adsorption of Cu(II) by EDTA functionalized Fe3O4 magnetic nano-particles
Liu, Y., Chen, M., & Yongmei, H. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.12.027 · Cited by 292
Monier, M., & Abdel-Latif, D. A. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.01.015 · Cited by 274
Luo, S., Xu, X., Zhou, G., Liu, C., Tang, Y., & Liu, Y. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.03.062 · Cited by 265
Ghaedi, M., Sadeghian, B., Pebdani, A. A., Sahraei, R., Daneshfar, A., & Duran, C. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.111 · Cited by 259
Pb (II) removal from aqueous media by EDTA-modified mesoporous silica SBA-15
Huang, J., Ye, M., Qu, Y., Chu, L., Chen, R., He, Q., & Xu, D. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.06.054 · Cited by 220
Tabesh, S., Davar, F., & Loghman-Estarki, M. R. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.246 · Cited by 217
Sharma, P., Hussain, N., Borah, D. J., & Das, M. R. (2013) · Journal of Chemical & Engineering Data · doi:10.1021/je400743r · Cited by 211
Sorption of Brilliant Blue FCF in soils as affected by pH and ionic strength
Germán-Heins, J., & Flury, M. (2000) · Geoderma · doi:10.1016/s0016-7061(00)00027-6 · Cited by 199
Enhanced malachite green removal from aqueous solution by citric acid modified rice straw
Gong, R., Jin, Y., Chen, F., Chen, J., & Liu, Z. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.03.010 · Cited by 186
Preparation and adsorption properties of magnetic chitosan composite adsorbent for Cu 2+ removal
Li, J., Jiang, B., Liu, Y., Qiu, C., Hu, J., Qian, G., Guo, W., & Ngo, H. H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.156 · Cited by 180
Removal of Ag+ from water environment using a novel magnetic thiourea-chitosan imprinted Ag+
Fan, L., Luo, C., Lv, Z., Lu, F., & Qiu, H. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.07.080 · Cited by 174
Zheng, J., Dong, Y., Wang, W., Ma, Y., Hu, J., Chen, X., & Chen, X. (2013) · Nanoscale · doi:10.1039/c3nr01075a · Cited by 172
Ge, Y., Li, Z., Kong, Y., Song, Q., & Wang, K. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.02.011 · Cited by 167
Wang, Z., Guo, J., Ma, J., & Shao, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04840k · Cited by 164
Mesoporous Chitosan–SiO2 Nanoparticles: Synthesis, Characterization, and CO2 Adsorption Capacity
Rafigh, S. M., & Heydarinasab, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02388 · Cited by 164
Chen, H., Lin, J., Zhang, N., Chen, L., Zhong, S., Wang, Y., Zhang, W., & Ling, Q. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.11.002 · Cited by 157
Wang, J., & Li, Z. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.06.043 · Cited by 145
Synthesis of amino-functionalized mesoporous alumina with enhanced affinity towards Cr(VI) and CO2
Cai, W., Tan, L., Yu, J., Jaroniec, M., Liu, X., Cheng, B., & Verpoort, F. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.11.011 · Cited by 136
Pb(II) sorption from aqueous solution by novel biochar loaded with nano-particles
Wang, C., & Wang, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.10.125 · Cited by 134
Huang, Y., & Wang, Z. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.057 · Cited by 134
Removal of toxic metal ions from wastewater using ZnO@Chitosan core-shell nanocomposite
Saad, A. H. A., Azzam, A. M., El‐Wakeel, S. T., Mostafa, B. B., & El-latif, M. B. A. (2017) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2017.12.004 · Cited by 131
Tovar-Gómez, R., Rivera-Ramírez, D. A., Hernández‐Montoya, V., Bonilla‐Petriciolet, A., Duran-Valle, C. J., & Montes-Morán, M. Á. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.015 · Cited by 129
Monier, M., Ayad, D. M., Wei, Y., et al. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2010.01.002 · Cited by 125
Jiang, H., Yang, T., Wang, Y., Lian, H., & Hu, X. (2013) · Talanta · doi:10.1016/j.talanta.2013.05.008 · Cited by 120
Preparation and Characterization of Chitosan Poly(acrylic acid) Magnetic Microspheres
Guo, L., Liu, G., Hong, R., & Li, H. (2010) · Marine Drugs · doi:10.3390/md8072212 · Cited by 115
Adsorption of anionic dyes on chitosan grafted poly(alkyl methacrylate)s
Konaganti, V. K., Ramanjaneyulu, K., Patil, S., & Madras, G. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.003 · Cited by 115
Evaluation of magnetic chitosan beads for adsorption of heavy metal ions
Fan, C., Li, K., He, Y., Wang, Y., Qian, X., & Jia, J. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.033 · Cited by 103
Efficient Adsorption of Methyl Orange Using a Modified Chitosan Magnetic Composite Adsorbent
Yang, D., Qiu, L., & Yang, Y. (2016) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.6b00706 · Cited by 98
Zhou, L., Pan, S., Chen, X., Zhao, Y., Zou, B., & Jin, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.060 · Cited by 96
Aqueous Hg(II) immobilization by chitosan stabilized magnetic iron sulfide nanoparticles
Sun, M., Cheng, G., Ge, X., Chen, M., Wang, C., Lou, L., & Xu, X. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.10.119 · Cited by 90
Bhatt, R., Sreedhar, B., & Sudhakar, P. P. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.041 · Cited by 84
Nitrogen-enriched carbon sheet for Methyl blue dye adsorption
Hussain, I., Li, Y., Qi, J., Li, J., & Wang, L. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.03.051 · Cited by 82
Application of chitosan in removal of molybdate ions from contaminated water and groundwater
Bertoni, F. A., González, J. C., García, S. I., Sala, L. F., & Bellú, S. E. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.027 · Cited by 77
Zhou, Z., FeiHong, J., Lee, T.-C., & Yue, T. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.07.207 · Cited by 56
Cestari, A. R., Vieira, E. F. S., de Oliveira, I. A., & Bruns, R. E. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.08.063 · Cited by 55
Kuroiwa, T., Takada, H., Asami, S., Saito, K., Kobayashi, I., Uemura, K., & Kanazawa, A. (2016) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2016.11.046 · Cited by 54
Cited by
Elgarahy, A. M., Elwakeel, K. Z., Mohammad, S. H., & Elshoubaky, G. A. (2021) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2021.100209 · Cited by 686
Chitosan-based materials: Preparation, modification and application
Wang, J., & Zhuang, S. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131825 · Cited by 602
Recent Advances in Chitosan-Based Applications—A Review
Thambiliyagodage, C., Jayanetti, M., Mendis, A., Ekanayake, G., Liyanaarachchi, H., & Vigneswaran, S. (2023) · Materials · doi:10.3390/ma16052073 · Cited by 374
Insight on water remediation application using magnetic nanomaterials and biosorbents
Abdel Maksoud, M. I. A., Elgarahy, A. M., Farrell, C., Al-Muhtaseb, A. H., Rooney, D. W., & Osman, A. I. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213096 · Cited by 374
Methods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Metadata
- Authors
- Chen, B., Zhao, H., Chen, S., Long, F., Huang, B., Yang, B., & Pan, X.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 356
- Pages
- 69-80
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2888849941
- Cited by
- 381
- References
- 55
- FWCI
- 18.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.