The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Hydrothermal conversion of sewage sludge: Focusing on the characterization of liquid products and their methane yields
Abstract
The conversion of dewatered sewage sludge (DSS) into bio-oil and hydro-char through hydrothermal conversion (HTC) has been well studied, while the treatment of wastewater (HTCWW) was overlooked. The present study aimed to investigate the organic compositions of HTCWW obtained under different temperatures and residence time (170–320 °C, 0.5–6.0 h) and their potentials use for methane production through anaerobic digestion (AD). Results showed that the methane yield achieved to 286 mL CH4/g COD when HTC temperature was 170 °C while it was decreased to only 136 mL CH4/g COD at 320 °C. The methane yield of HTCWW was also decreased with the increase of HTC residence time. Proteins and volatile fatty acids (VFAs) were the main products of HTCWW but more recalcitrant degradable compounds e.g. humic acid-like, melanoidins, nitrogen heterocycle, and phenols were formed through 3D-EEM and GC–MS analysis, which might result in the lower methane yield of HTCWW at increased temperatures. Furthermore, microbial analysis showed that different microbial community compositions for anaerobic degradation of the HTCWW samples were established due to the different organic compositions. Therefore, the integration of HTC and AD can be a potential complementary process for energy recovery from DSS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Ruiz, H. A., Rodríguez-Jasso, R. M., Fernandes, B. D., Vicente, A. A., & Teixeira, J. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.069 · Cited by 608
Danso-Boateng, E., Shama, G., Wheatley, A. D., Martin, S. J., & Holdich, R. G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.096 · Cited by 353
Zhou, Y., Schideman, L., Yu, G., & Zhang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24241b · Cited by 269
Cited by
Valorization of hydrothermal liquefaction aqueous phase: pathways towards commercial viability
Watson, J., Wang, T., Si, B., Chen, W.-T., Aierzhati, A., & Zhang, Y. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100819 · Cited by 394
Usman, M., Chen, H., Chen, K., Ren, S., Clark, J. H., Fan, J., Luo, G., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c8gc03957g · Cited by 229
Self-citationLucian, M., Volpe, M., Merzari, F., Wüst, D., Kruse, A., Andreottola, G., & Fiori, L. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123734 · Cited by 121
Leng, L., Yang, L., Chen, J., Hu, Y., Li, H., Li, H., Jiang, S., Peng, H., Yuan, X., & Huang, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126238 · Cited by 89
Chen, Z., Rao, Y., Usman, M., Chen, H., Białowiec, A., Zhang, S., & Luo, G. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.146077 · Cited by 71
Self-citationPecchi, M., Patuzzi, F., Benedetti, V., Di Maggio, R., & Baratieri, M. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106206 · Cited by 42
Pecchi, M., Patuzzi, F., Benedetti, V., Di Maggio, R., & Baratieri, M. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114810 · Cited by 24
Metadata
- Authors
- Chen, H., Rao, Y., Cao, L., Shi, Y., Hao, S., Luo, G., & Zhang, S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 357
- Pages
- 367-375
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2892702034
- Cited by
- 220
- References
- 5
- FWCI
- 15.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.