The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fabrication and characterization of thin-film composite (TFC) nanofiltration membranes incorporated with cellulose nanocrystals (CNCs) for enhanced desalination performance and dye removal
Abstract
Abstract In this study, cellulose nanocrystals (CNCs) were incorporated into a polyamide (PA) layer to prepare novel thin film composite (TFC) nanofiltration membranes (CNC-TFC-Ms). Scanning electron microscopy (SEM) results revealed differences in the surface morphologies of the CNC-TFC-Ms compared with that of a control membrane (TFC-control-M). The pore size distribution (PSD) results showed that the CNC-TFC-Ms exhibited smaller pore sizes and narrower PSD curves as the CNC content in the PA layer increased. Continuous potential measurements showed that the negativity of the surface charge of the CNC-TFC-Ms decreased as the CNC concentration increased. The CNC-TFC-Ms showed great rejection performance for divalent salts with rejection rates over 98.0% and 97.5% for Na2SO4 and MgSO4, respectively. Meanwhile, the filtration flux of salts was dramatically enhanced compared with that of TFC-control-M. Additionally, the permeate flux and rejection of NaCl were simultaneously enhanced as the CNC content increased, demonstrating that CNC-TFC-Ms can overcome the trade-off limitation. In addition, the NaCl/Na2SO4 selectivity of the CNC-TFC-Ms reached as high as 60, suggesting their distinguished divalent/monovalent separation characteristics. The CNC-TFC-Ms exhibited greater dye removal for both anionic and cationic dyes due to their decreased negative charge and smaller pore size than the control membrane.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cited by
A Review on Reverse Osmosis and Nanofiltration Membranes for Water Purification
Yang, Z., Zhou, Y., Feng, Z., Rui, X., Zhang, T., & Zhang, Z. (2019) · Polymers · doi:10.3390/polym11081252 · Cited by 606
Yang, Z., Sun, P.-F., Li, X., Gan, B., Wang, L., Song, X., Park, H.-D., & Tang, C. Y. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c05377 · Cited by 577
Wang, K., Wang, X., Januszewski, B., Liu, Y., Li, D., Fu, R., Elimelech, M., & Huang, X. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01599g · Cited by 577
Self-citationArabkhani, P., & Asfaram, A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121394 · Cited by 389
How to coordinate the trade-off between water permeability and salt rejection in nanofiltration?
Zhang, R., Tian, J., Gao, S., & Van der Bruggen, B. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02510k · Cited by 268
Metadata
- Authors
- Bai, L., Liu, Y., Ding, A., Ren, N., Li, G., & Liang, H.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 358
- Pages
- 1519-1528
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2896600806
- Cited by
- 254
- References
- 1
- FWCI
- 9.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication and characterization of thin-film composite (TFC) nanofiltration membranes incorporated with cellulose nanocrystals (CNCs) for enhanced desalination performance and dye removal. https://app.cochat.ai/papers/10.1016/j.cej.2018.10.147
- The paper
- Bai, L., Liu, Y., Ding, A., Ren, N., Li, G., & Liang, H. (2019). Fabrication and characterization of thin-film composite (TFC) nanofiltration membranes incorporated with cellulose nanocrystals (CNCs) for enhanced desalination performance and dye removal. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.10.147
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.