The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Photocatalytic properties of TiO2 and Fe-doped TiO2 prepared by metal organic framework-mediated synthesis
Open accessAbstract
The Ti-containing metal organic framework (MOF) MIL-125 has been used as sacrificial precursor to obtain TiO2 materials through the MOF-mediated synthesis route. In this study, Fe3+ was deposited on the surface of MIL-125 after its hydrothermal synthesis. Targeted Fe-doped titania photocatalysts were prepared through the direct calcination in air of Fe/MIL-125 crystals and/or by using a two-step method, including carbonization in inert atmosphere followed by calcination in air. The relationship between the synthesis conditions and the properties of the Fe-doped titania nanopowders, such as Fe content, porosity, phase composition and particle size was investigated. From elemental mapping, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, UV–Vis absorption spectroscopy and photoluminescence emission spectra, the presence of highly dispersed Fe3+ ions incorporated into the TiO2 crystal lattice was confirmed, which led to a significant red shift of photoresponse towards visible light and reduced the recombination rate of electron-hole pairs at low iron content. By varying the pre-carbonization temperature, both crystal size and phase composition in the final materials were modulated. The performance of Fe-doped titania materials in photocatalytic water-splitting was tested for hydrogen evolution. Optimal photocatalytic performance was found at 0.15 and 0.5 wt% iron concentration and exceeded those of non-doped titania and commercial anatase both under visible and UV light irradiation, respectively, and among the highest reported in literature for these systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
Adsorption/catalytic properties of MIL-125 and NH2-MIL-125
Kim, S.-N., Kim, J., Kim, H.-Y., Cho, H.-Y., & Ahn, W.-S. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.08.014 · Cited by 528 · cited 1×
“The reaction rate was found to be initially 32 μmol gcat-1 h−1 (Figure 10b), but the activity decreases with time due to the low stability in aqueous solution of this MOF [49].”
Background
Cited by
Bavykina, A., Kolobov, N., Khan, I. S., Bau, J. A., Ramirez, A., & Gascon, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00685 · Cited by 1,754
Self-citationDoping regulation in transition metal compounds for electrocatalysis
Zhang, A., Liang, Y., Zhang, H., Geng, Z., & Zeng, J. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00330e · Cited by 692
A Review of MOFs and Their Composites‐Based Photocatalysts: Synthesis and Applications
Qian, Y., Zhang, F., & Pang, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104231 · Cited by 540
Bai, S., Yang, N., Wang, X., Gong, F., Dong, Z., Gong, Y., Liu, Z., & Cheng, L. (2020) · ACS Nano · doi:10.1021/acsnano.0c05235 · Cited by 332
Metadata
- Authors
- Valero-Romero, M. J., Santaclara, J. G., Oar-Arteta, L., van Koppen, L., Osadchii, D. Y., Gascon, J., & Kapteijn, F.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 360
- Pages
- 75-88
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2901423098
- Cited by
- 199
- References
- 3
- FWCI
- 3.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.