The DOI matches its Crossref record.
Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture
Abstract
Abstract Calcium looping is regarded as an effective and viable way to address CO2 emissions. To overcome the loss-in-capacity problems of calcium-based sorbents with the number of calcium looping cycles, a novel CaO/Ca12Al14O33 sorbent with a microtube-like structure was prepared from carbide slag and Al(NO3)3·9H2O using paper fibre as a biotemplate. The CO2 capture performance and microstructure of the novel synthetic sorbent under calcium looping conditions were investigated. The results show that the utilization of the biotemplate is good to retain the high cyclic CO2 capture reactivity of the synthetic sorbent. Due to the unique hollow porous structure, the CO2 capture capacity of the synthetic sorbent containing 7.5 wt% Al2O3 retains 0.56 and 0.33 g/g after 30 cycles under mild and severe calcination conditions, respectively, which are 2.56 and 2.11 times higher than those of carbide slag under the same respective calcination conditions. With the presence of 10% steam in the carbonation atmosphere, the CO2 capture capacity of the synthetic sorbent retains 0.55 g/g under the severe calcination conditions after 10 cycles. The native hierarchical biostructure of paper fibre is preserved in the synthetic sorbent. CaO and Ca12Al14O33 are uniformly distributed in the synthetic sorbent, resulting in a high sintering resistance during multiple CO2 capture cycles. CO2 can penetrate through the microtube-like structure of the synthetic sorbent from two directions, i.e., from the outer surface and inner surface. This phenomenon effectively enlarges the contact area between CO2 and CaO. The CaO/Ca12Al14O33 sorbent with a hollow porous structure by means of a biotemplate appears promising in the calcium looping technology for CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122736 · Cited by 519
Thermochemical conversion of biomass: Potential future prospects
Wang, Y., & Wu, J. J. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113754 · Cited by 259
Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Enhanced CO2 capture using organic acid structure modified waste eggshell derived CaO sorbent
Nawar, A., Ali, M., Khoja, A. H., Waqas, A., Anwar, M., & Mahmood, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104871 · Cited by 89
Metadata
- Authors
- Ma, X., Li, Y., Yan, X., Zhang, W., Zhao, J., & Wang, Z.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 361
- Pages
- 235-244
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2904465984
- Cited by
- 192
- References
- 0
- FWCI
- 6.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture. https://app.cochat.ai/papers/10.1016/j.cej.2018.12.061
- The paper
- Ma, X., Li, Y., Yan, X., Zhang, W., Zhao, J., & Wang, Z. (2019). Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.12.061
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.