The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Highly efficient and selective capture of heavy metals by poly(acrylic acid) grafted chitosan and biochar composite for wastewater treatment
Abstract
A novel poly(acrylic acid) grafted chitosan and biochar composite (PAA/CTS/BC) for highly efficient and selective capture of heavy metals (HMs) was prepared. PAA/CTS/BC showed efficient and rapid adsorption of Cu2+, Zn2+, Ni2+, Pb2+, Cd2+, Mn2+, Co2+, and Cr3+, well fitted by Langmuir and pseudo-second-order kinetic models, respectively, and it could be applied in a wide pH range (2–7) with high adsorption capacity. Attractively, PAA/CTS/BC showed strongly selective adsorption in the order of Cr3+ > Pb2+ > Cu2+ ≫ Cd2+ > Ni2+ > Zn2+ > Co2+ > Mn2+. The distribution coefficients of Cu2+, Pb2+, and Cr3+ (~104, ~106, and ~107 mL/g, respectively) nearly matched or exceeded that of reported adsorbents in literatures. Surface complexation via inner-sphere complexes with carboxyl, hydroxyl, or amine groups is proposed as the major removal mechanism of HMs by PAA/CTS/BC; however, the covalent bond strength between HMs and oxygen/nitrogen atoms significantly differed among HMs based on the principle of hard and soft acids and bases, essentially determining the adsorption affinity and selectivity of HMs on PAA/CTS/BC. Surface precipitation was also an important mechanism for adsorption of Cr3+ by PAA/CTS/BC. Additionally, Cr3+ adsorbed on PAA/CTS/BC was almost completely resistant to desorption by 0.01 mol/L Na2EDTA solution, while other HMs could be mostly recovered (>80%) by the same method, indicating its promising potential of recycling pure Cr3+ and excellent reusability. Finally, the case study on the treatment of metal finishing wastewater confirmed that PAA/CTS/BC could efficiently achieve both wastewater purification and metal recycling for specific industrial wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Relative distribution of Pb2+ sorption mechanisms by sludge-derived biochar
Lu, H., Zhang, W., Yang, Y., Huang, X., Wang, S., & Qiu, R. (2012) · Water Research · doi:10.1016/j.watres.2011.11.058 · Cited by 1,102
Metal–carboxylate interactions in metal–alginate complexes studied with FTIR spectroscopy
Papageorgiou, S. K., Kouvelos, E. P., Favvas, E. P., Sapalidis, A. A., Romanos, G. E., & Katsaros, F. K. (2010) · Carbohydrate Research · doi:10.1016/j.carres.2009.12.010 · Cited by 904
Ma, L., Wang, Q., Islam, S. M., Liu, Y., Ma, S., & Kanatzidis, M. G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00110 · Cited by 705
Self-citationDeng, J., Liu, Y., Liu, S., Zeng, G., Tan, X., Huang, B., Tang, X., Wang, S., Hua, Q., & Yan, Z. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.069 · Cited by 483
Self-citationSorption of heavy metals on chitosan-modified biochars and its biological effects
Zhou, Y., Gao, B., Zimmerman, A. R., Fang, J., Sun, Y., & Cao, X. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.07.036 · Cited by 443
Ling, L.-L., Liu, W.-J., Zhang, S., & Jiang, H. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02382 · Cited by 407
Ma, Y., Lv, L., Guo, Y., Fu, Y., Shao, Q., Wu, T., Guo, S., Sun, K., Guo, X., Wujcik, E. K., et al. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.009 · Cited by 340
3D graphene/δ-MnO2 aerogels for highly efficient and reversible removal of heavy metal ions
Liu, J., Ge, X., Ye, X., Wang, G., Zhang, H., Zhou, H., Zhang, Y., & Zhao, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08106h · Cited by 304
Aging induced changes in biochar's functionality and adsorption behavior for phosphate and ammonium
Mia, S., Dijkstra, F. A., & Singh, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b00647 · Cited by 286
Abdul, G., Zhu, X., & Chen, B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.074 · Cited by 256
Dong, X., Ma, L. Q., Zhu, Y., Li, Y., & Gu, B. (2013) · Environmental Science & Technology · doi:10.1021/es4017816 · Cited by 245
Ma, J., Zhou, G., Chu, L., Liu, Y., Liu, C., Luo, S., & Wei, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02181 · Cited by 240
Self-citationLiang, Q., Luo, H., Geng, J., & Chen, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.145 · Cited by 238
Silva-Weiss, A., Bifani, V., Ihl, M., Sobral, P. J. A., & Gómez-Guillén, M. C. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2012.11.028 · Cited by 233
Chen, H., Wang, X., Li, J., & Wang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00299k · Cited by 230
Zhang, D., Wang, L., Zeng, H., Yan, P., Nie, J., Sharma, V. K., & Wang, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.127 · Cited by 220
Liu, J., Su, D., Yao, J., Huang, Y., Shao, Z., & Chen, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10814h · Cited by 212
Zhang, M., Song, L., Jiang, H., Li, S., Shao, Y., Yang, J., & Li, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10513k · Cited by 202
Ding, C., Cheng, W., Wang, X., Wu, Z., Sun, Y., Chen, C., Wang, X., & Yu, S. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.04.002 · Cited by 199
Zhang, L., Wang, J., Ren, X., Zhang, W., Zhang, T., Liu, X., Du, T., Li, T., & Wang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07349j · Cited by 198
Self-citationSurface-Functionalized Porous Lignin for Fast and Efficient Lead Removal from Aqueous Solution
Li, Z., Xiao, D., Ge, Y., & Koehler, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03994 · Cited by 195
Competitive sorption of As(V) and Cr(VI) on carbonaceous nanofibers
Cheng, W., Ding, C., Wang, X., Wu, Z., Sun, Y., Yu, S., Hayat, T., & Wang, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.02.073 · Cited by 195
Myglovets, M., Poddubnaya, O. I., Sevastyanova, O., Lindström, M. E., Gawdzik, B., Sobiesiak, M., Tsyba, M. M., Sapsay, V. I., Klymchuk, D. O., & Puziy, A. M. (2014) · Carbon · doi:10.1016/j.carbon.2014.09.032 · Cited by 192
Synthesis, characterization and stability of Cr(III) and Fe(III) hydroxides
Papassiopi, N., Vaxevanidou, K., Christou, C., Karagianni, E., & Antipas, G. S. E. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.09.058 · Cited by 189
Fan, H.-L., Zhou, S.-F., Jiao, W.-Z., Qi, G.-S., & Liu, Y.-Z. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.050 · Cited by 179
Self-citationEffective Adsorption/Reduction of Cr(VI) Oxyanion by Halloysite@Polyaniline Hybrid Nanotubes
Zhou, T., Li, C., Jin, H., Lian, Y., & Han, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14079 · Cited by 176
Adsorption and desorption of U(VI) on different-size graphene oxide
Liu, X., Sun, J. T., Xu, X.-T., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.050 · Cited by 165
Ifthikar, J., Jiao, X., Ngambia, A., Wang, T., Khan, A., Jawad, A., Xue, Q., Liu, L., & Chen, Z. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.053 · Cited by 161
Zhang, H., Dang, Q., Liu, C., Cha, D., Yu, Z., Zhu, W., & Fan, B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00480 · Cited by 145
Zhang, L., Xia, W., Liu, X., & Zhang, W. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05194g · Cited by 144
Self-citationChen, Y., He, M., Wang, C., & Wei, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01512f · Cited by 136
Ma, J., Luo, J., Liu, Y., Wei, Y., Cai, T., Yu, X., Liu, H., Liu, C., & Crittenden, J. C. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07250g · Cited by 134
Self-citationZhang, L., Tang, S., Jiang, C., Jiang, X., & Guan, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15049 · Cited by 132
Self-citationKomárek, M., Koretsky, C. M., Stephen, K. J., Alessi, D. S., & Chrastný, V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03063 · Cited by 123
Development of nitrogen-doped carbon for selective metal ion capture
Ji, Q., Hu, C., Liu, H., & Qu, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.06.018 · Cited by 120
Yu, W., Yuan, P., Liu, D., Deng, L., Yuan, W., Tao, B., Cheng, H., & Chen, F. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.11.034 · Cited by 97
Inorganic layered ion-exchangers for decontamination of toxic metal ions in aquatic systems
He, W., Ai, K., Ren, X., Wang, S., & Lu, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05076c · Cited by 96
dos Anjos, V. E., Rohwedder, J. J. R., Cadore, S., Abate, G., & Grassi, M. T. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.07.013 · Cited by 94
Adsorption, equilibrium isotherm, and thermodynamic studies to the removal of acid orange 7
Zaheer, Z., Bawazir, W. A., Albukhari, S. M., & Basaleh, A. S. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.04.064 · Cited by 89
Zhang, H., Li, P., Wang, Z.-M., Cui, W. W., Zhang, Y., Zhang, Y., Zheng, S., & Zhang, Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00640 · Cited by 70
Effectiveness and mechanisms of ammonium adsorption on biochars derived from biogas residues
Yu, Q., Xia, D., Li, H., Ke, L., Wang, Y., Wang, H., Zheng, Y., & Li, Q. (2016) · RSC Advances · doi:10.1039/c6ra16913a · Cited by 67
Yang, Z., Ren, L., Jin, L., Huang, L., He, Y., Tang, J., Yang, W., & Wang, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.086 · Cited by 67
Huang, Y., Zhao, W., Zhang, X., Peng, H., & Gong, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.121935 · Cited by 63
Zhang, L., Zhao, B., Xu, G., & Guan, Y. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.04.211 · Cited by 61
Self-citationXu, G., Xie, Y., Cao, J., Tao, M., & Zhang, W. (2016) · Polymer Chemistry · doi:10.1039/c6py00335d · Cited by 60
Huang, R., Li, H., Zhang, T., Li, D., Tang, P., & Feng, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01557 · Cited by 48
Mucoadhesive property and biocompatibility of methylated N-aryl chitosan derivatives
Sajomsang, W., Ruktanonchai, U., Gonil, P., & Nuchuchua, O. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.07.020 · Cited by 45
Lalita, Singh, A. P., & Sharma, R. K. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.163 · Cited by 38
Chen, Y., Chen, J., Chen, S., Tian, K., & Jiang, H. T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01011j · Cited by 31
She, H., Ma, X., & Chang, G. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.01.114 · Cited by 27
Song, Q., Yang, B., Wang, H., Xu, S., & Cao, Y. (2016) · Journal of Residuals Science and Technology · doi:10.12783/issn.1544-8053/13/3/3 · Cited by 19
Cited by
Recent advances in heavy metal removal by chitosan based adsorbents
Upadhyay, U., Sreedhar, I., Singh, S. A., Patel, C. M., & Anitha, K. L. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117000 · Cited by 532
da Silva Alves, D. C., Healy, B., Pinto, L. A. D. A., Cadaval, T. R. S., & Breslin, C. B. (2021) · Molecules · doi:10.3390/molecules26030594 · Cited by 381
Adsorption of potentially toxic elements in water by modified biochar: a review
Zhang, A., Li, X., Xing, J., & Xu, G. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104196 · Cited by 368
Qiu, Y., Zhang, Q., Gao, B., Li, M., Fan, Z., Sang, W., Hao, H., & Wei, X. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115018 · Cited by 304
KOH-activated biochar and chitosan composites for efficient adsorption of industrial dye pollutants
Su, X., Wang, X., Ge, Z., Bao, Z., Lin, L., Chen, Y., Dai, W., Sun, Y., Yuan, H., Yang, W., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150387 · Cited by 296
Metadata
- Authors
- Zhang, L., Tang, S., He, F., Liu, Y., Mao, W., & Guan, Y.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 378
- Pages
- 122215
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2958283432
- Cited by
- 300
- References
- 51
- FWCI
- 10.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.