The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Strengthening, toughing and thermally stable ultra-thin MXene nanosheets/polypropylene nanocomposites via nanoconfinement
Abstract
Abstract Developing high-performance polymer nanocomposites with outstanding heat resistance and high strength, and superior ductility is vital for their practical applications. However, it is a great challenge to achieve simultaneous improvements in the strength and ductility due to the presence of antagonistic mechanisms in the both parameters. Nanoconfinement structure affording heat resistance and high strength, and good extensibility is inspired by the natural world, such as spider web, silkworm net, and honeycomb consisting of three-dimensional networks generated by vast hydrogen bonds. Here, we reported the methods of oxygen-free fast drying assisted solution casting and melt blending for fabricating advanced ultrathin two-dimensional (2D) titanium carbide (Ti3C2Tx)/polypropylene nanocomposites with significantly enhanced initial degradation temperature (79.1 °C increase), tensile strength (35.3% increase), ductility (674.6% increase) and storage modulus (102.2% increase). The thermal stability and mechanical properties improvements induced by Ti3C2Tx nanosheets are superior to those of similar 2D nanomaterials, such as graphene, molybdenum disulfide, montmorillonite, layered double hydroxide, and even 1D carbon nanotubes because of the combination of H-bonds induced nanoconfinement structure with the physical barrier effect of ultrathin Ti3C2Tx nanosheets. This work provides a facile nanoconfinement-inspired strategy for the design of thermally stable, mechanical strong and ductile polymer materials and a paradigm for broadening the application of 2D MXenes in polymeric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Hu, M., Hu, T., Li, Z., Yang, Y., Cheng, R., Yang, J., Cui, C., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b00676 · Cited by 468
RetractedConductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Ran, J., Gao, G., Li, F.-T., Ma, T.-Y., Du, A., & Qiao, S.-Z. (2017) · Nature Communications · doi:10.1038/ncomms13907 · Cited by 2,023
Novel Electronic and Magnetic Properties of Two‐Dimensional Transition Metal Carbides and Nitrides
Khazaei, M., Arai, M., Sasaki, T., Chung, C., Venkataramanan, N. S., Estili, M., Sakka, Y., & Kawazoe, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202502 · Cited by 1,998
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Dispersions of Two-Dimensional Titanium Carbide MXene in Organic Solvents
Maleski, K., Mochalin, V. N., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04830 · Cited by 1,033
Cited by
Panda, S., Deshmukh, K., Khadheer Pasha, S. K., Theerthagiri, J., Manickam, S., & Choi, M. Y. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214518 · Cited by 465
Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials
Yang, H., Yu, B., Xu, X., Bourbigot, S., Wang, H., & Song, P. (2020) · Green Chemistry · doi:10.1039/d0gc00449a · Cited by 461
Self-citationMXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
Self-citationXue, Y., Feng, J., Huo, S., Song, P., Yu, B., Liu, L., & Wang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125336 · Cited by 311
Self-citationPolyphosphazenes-based flame retardants: A review
Zhou, X., Qiu, S., Mu, X., Zhou, M., Cai, W., Song, L., Xing, W., & Hu, Y. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108397 · Cited by 280
Metadata
- Authors
- Shi, Y., Liu, C., Liu, L., Fu, L., Yu, B., Lv, Y., Yang, F., & Song, P.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 378
- Pages
- 122267
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2957077005
- Cited by
- 261
- References
- 44
- FWCI
- 16.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strengthening, toughing and thermally stable ultra-thin MXene nanosheets/polypropylene nanocomposites via nanoconfinement. https://app.cochat.ai/papers/10.1016/j.cej.2019.122267
- The paper
- Shi, Y., Liu, C., Liu, L., Fu, L., Yu, B., Lv, Y., Yang, F., & Song, P. (2019). Strengthening, toughing and thermally stable ultra-thin MXene nanosheets/polypropylene nanocomposites via nanoconfinement. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.122267
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.