A new honeycomb carbon monolith for CO2 capture by rapid temperature swing adsorption using steam regeneration
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A rapid process for CO2 capture is of key importance for the economic feasibility of the process in industry, consequently short adsorption/desorption cycles are crucial. With this aim in mind, a carbon based honeycomb monolith was evaluated for CO2 capture in a thermal swing adsorption process at short contact times. The effect of (1) regeneration time, (2) presence of water vapor during adsorption and desorption and (3) regeneration method (steam versus hot air) on CO2 adsorption was studied. The monolith was characterized in terms of porosity and CO2, N2, and H2O isotherms. Cyclic adsorption/desorption experiments were performed using different synthetic gas mixtures with concentrations of CO2 ranging between 6 and 15 vol%. The effect of water vapor in the synthetic gas mixture on adsorption capacity was limited but increases with relative humidity. Steam of 120 °C was used to heat the monolith and desorb CO2. Advantages of steam usage are the facile separation of steam and concentrated CO2 and the low (waste) heating energy cost of steam. It was demonstrated that the steam allows very fast heating and cooling of the monolith. However, the presence of residual condensation water after the cooling step reduces the cyclic adsorption capacity, requiring an additional drying step with hot or cold air.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Optimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210
Cited by
Advancements in CO2 capture by absorption and adsorption: A comprehensive review
Soo, X. Y. D., Lee, J. J. C., Wu, W.-Y., Tao, L., Wang, C., Zhu, Q., & Bu, J. (2024) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2024.102727 · Cited by 509
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World
Wang, Y., Tian, Y., Pan, S., & Snyder, S. W. (2022) · ChemSusChem · doi:10.1002/cssc.202201290 · Cited by 39
A novel contactor for reducing the cost of direct air capture of CO2
Tegeler, E., Cui, Y., Masoudi, M., Bahmanpour, A. M., Colbert, T., Hensel, J., & Balakotaiah, V. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119107 · Cited by 31
Sandu, V.-C., Cormos, A.-M., Dumbrava, I.-D., Imre-Lucaci, A., Cormos, C.-C., de Boer, R., Boon, J., & Sluijter, S. (2021) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2021.103447 · Cited by 23
Metadata
- Authors
- Verougstraete, B., Martín-Calvo, A., Van der Perre, S., Baron, G., Finsy, V., & Denayer, J. F. M.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 383
- Pages
- 123075
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2980193182
- Cited by
- 76
- References
- 3
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new honeycomb carbon monolith for CO2 capture by rapid temperature swing adsorption using steam regeneration. https://app.cochat.ai/papers/10.1016/j.cej.2019.123075
- The paper
- Verougstraete, B., Martín-Calvo, A., Van der Perre, S., Baron, G., Finsy, V., & Denayer, J. F. M. (2020). A new honeycomb carbon monolith for CO2 capture by rapid temperature swing adsorption using steam regeneration. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.123075
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.