The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations
Open accessAbstract
Abstract Activated carbons were prepared from ashitaba waste and a walnut shell to study the adsorption mechanism of congo red and methylene blue dyes in aqueous solution. These adsorbents were characterized via XRD, FTIR and SEM techniques and the dye adsorption isotherms at three temperatures were quantified. A statistical physics model was applied to interpret the adsorption mechanism of tested dyes and adsorbents. Modeling results showed that these dyes were practically separated in the solution leading to an absence of the aggregation process. Adsorption orientations of dye molecules on the adsorbents changed depending on the temperature and nature of systems. The adsorption capacity of ashitaba waste activated carbon for the removal of congo red was significant thus indicating strong interactions between this dye and tested adsorbent. Calculated adsorption energy varied from 7.25 to 20.43 kJ/mol and they showed that the adsorption of both adsorbates occurred via physical interactions at different temperatures where the removal process was endothermic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357
Physical Adsorption Characterization of Nanoporous Materials
Thommes, M. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.201000064 · Cited by 1,394
Role of nanomaterials in water treatment applications: A review
Santhosh, C., Velmurugan, V., Jacob, G., Jeong, S. K., Grace, A. N., & Bhatnagar, A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.053 · Cited by 1,256
Xu, F., Yu, J., Tesso, T., Dowell, F., & Wang, D. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.019 · Cited by 981
Dai, Y., Zhang, N., Xing, C., Cui, Q., & Sun, Q. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.161 · Cited by 935
Prahas, D., Kartika, Y., Indraswati, N., & Ismadji, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.08.032 · Cited by 873
Danish, M., & Ahmad, T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.02.003 · Cited by 807
Saeed, A., Sharif, M., & Iqbal, M. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.03.041 · Cited by 600
Isotherms, kinetics and thermodynamics of acid dye adsorption on activated palm ash
Hameed, B. H., Ahmad, A. A., & Aziz, N. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.01.032 · Cited by 574
Garside, P., & Wyeth, P. (2003) · Studies in Conservation · doi:10.1179/sic.2003.48.4.269 · Cited by 561
Cited by
Bouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.12.028 · Cited by 124
Mani, D., Elango, D., Priyadharsan, A., Al-Humaid, L. A., Al- Dahmash, N. D., Ragupathy, S., Jayanthi, P., & Ahn, Y.-H. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116026 · Cited by 62
Utilization of Tea Wastes for the Removal of Toxic Dyes from Polluted Water—A Review
Nasar, A. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-01205-y · Cited by 41
Metadata
- Authors
- Li, Z., Hanafy, H., Zhang, L., Sellaoui, L., Schadeck Netto, M., Oliveira, M. L. S., Seliem, M. K., Luiz Dotto, G., Bonilla-Petriciolet, A., & Li, Q.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 388
- Pages
- 124263
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3004247939
- Cited by
- 513
- References
- 37
- FWCI
- 24.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations. https://app.cochat.ai/papers/10.1016/j.cej.2020.124263
- The paper
- Li, Z., Hanafy, H., Zhang, L., Sellaoui, L., Schadeck Netto, M., Oliveira, M. L. S., Seliem, M. K., Luiz Dotto, G., Bonilla-Petriciolet, A., & Li, Q. (2020). Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.124263
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
