The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Cellulose/carbon Composites and their Applications in Water Treatment – a Review
Abstract
Abstract Cellulose, as the most abundant natural polymer material on the earth, has attracted worldwide attention due to its characteristics of reproducibility, universality, low cost, biocompatibility and biodegradability. Cellulose-based materials have potential value in supercapacitors, environment and biomedicine. The combination of cellulose and carbon materials can further adjust the microstructure of the composite such as porosity (76–98.8%) and specific surface area (5.07–47.3 m2/g), and enhance the properties of the composite such as the adsorption rate (47–100%) and the degradation rate of pollutants (60–100%), the Young's modulus (1.14–16.6 GPa) and the tensile strength (23.1–277.5 MPa). Besides, composites have the advantages of high electronic transmission efficiency and good reusability, which broaden their applications in water treatment. This review summarizes the molding methods of multi-dimensional cellulose materials, as well as the development status, preparation and modification methods of composites formed by carbon materials such as graphene, carbon nanotubes, activated carbon and nanodiamonds with cellulose, analyzes the research progress and existing problems of the composites in water treatment fields such as adsorption, catalysis, membrane separation and microbial fuel cells, and finally, we make some perspectives for the future researches and applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Georgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
Burakov, A. E., Galunin, E. V., Burakova, I. V., Kucherova, A. E., Agarwal, S., Tkachev, A. G., & Gupta, V. K. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.11.034 · Cited by 1,612
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Liang, H.-W., Wu, Z.-Y., Chen, L.-F., Li, C., & Yu, S.-H. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.008 · Cited by 440
Electrospun nanocomposites from polystyrene loaded with cellulose nanowhiskers
Rojas, O. J., Montero, G. A., & Habibi, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30011 · Cited by 198
Cited by
Teo, S. H., Ng, C. H., Islam, A., Abdulkareem-Alsultan, G., Joseph, C. G., Janaun, J., Taufiq-Yap, Y. H., Khandaker, S., Islam, G. J., Znad, H., et al. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.130039 · Cited by 352
Metadata
- Authors
- Dong, Y.-D., Zhang, H., Zhong, G.-J., Yao, G., & Lai, B.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 405
- Pages
- 126980
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3084605008
- Cited by
- 198
- References
- 11
- FWCI
- 6.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.