CoChat

A systematic literature review on the conversion of plastic wastes into valuable 2D graphene-based materials

Open access
Vieira, Octávia, Ribeiro, Rui S., Diaz de Tuesta, Jose L., Gomes, Helder T., Silva, Adrián M.T. · 2022 · Chemical Engineering Journal
Cited by 139

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

Increasing the economic attractiveness of plastic waste reusing/recycling is expected to contribute towards reducing their input in the environment. The use of plastic wastes as feedstock for the synthesis of added-value carbon materials has been studied in this context. However, there is a lack of a systematic review of the published works on this topic. Bearing this in mind, a systematic review was carried out in this study, covering the available literature on the conversion of plastic wastes into carbon materials. Clearly defined methodologies/criteria were accordingly established. 142 studies were selected for qualitative/overall analysis, including type/condition of plastic (pristine or waste), and type of carbon materials obtained. It was found that most of the studies report the utilization of plastic wastes (75%); and that the most representative materials obtained are carbon nanotubes (CNTs; 47.1% of the studies under evaluation), activated carbons (ACs; 22.2%) and 2D graphene-based materials (9.2%). Nevertheless, despite already being the third most significant group of carbon materials produced from plastic wastes, none of the 12 review articles available in the literature is fully devoted to the conversion of plastic wastes into 2D graphene-based materials. Therefore, the literature available on this topic was thoroughly reviewed for the first time. These studies report the synthesis of monolayer, few-layer and multi-layer graphene (including flash graphene) obtained through 4 main synthesis methodologies: (i) thermal decomposition of the plastics directly over a metal substrate; (ii) prior thermal decomposition of the plastics, with the resulting hydrocarbon gases released being fed to a chemical vapour deposition (CVD) system containing the metal substrate; (iii) thermal decomposition followed by ball milling and microwave sintering; and (iv) flash Joule heating (FJH).

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2021.131399

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 139

Metadata

Authors
Vieira, O., Ribeiro, R. S., Diaz de Tuesta, J. L., Gomes, H. T., & Silva, A. M. T.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2022-01
Volume
428
Pages
131399
ISSN
1385-8947 (ISSN-L)
OpenAlex
W3189118156
Cited by
139
References
9
FWCI
1.15
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.