The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
3D-printed hierarchical porous cellulose/alginate/carbon black hydrogel for high-efficiency solar steam generation
Abstract
Abstract Solar steam generation (SSG) has great application prospects in seawater desalination and dye wastewater treatment. However, it is still a challenge to realize a low-cost, rapid evaporation, high water quality and sustainable solar-driven water purification system. Three-dimensional (3D) structural design of evaporator is conducive to promoting evaporation efficiency, which has great potential in SSG field. In this study, 3D hierarchical porous hybrid hydrogel evaporators with embedded carbon black (CB) for SSG are built through 3D printing method. The 3D hierarchically porous cellulose/alginate/carbon black hydrogel (CACH) shows a super-hydrophilic wettability, and excellent light absorption (97%) within the wavelength range from 300 to 2500 nm, which can dramatically improve water transportation capacity and photothermal performance in the evaporator. The evaporation rate of the evaporator is as high as 1.33 kg m-2h−1 and the conversion efficiency of solar energy at 1 kW m−2 (one-sun) solar illumination is up to 90.6%. Moreover, the evaporation also exhibits superior salt resistant performance, and collected water meets World Health Organization (WHO) drinking water standards after purification from seawater. In addition, a small amount of photothermal material (1 wt% CB) is required in this system, which is beneficial to reduce the cost of the system. The 3D-printed hierarchically porous hydrogel evaporator has great application prospects in seawater desalination and wastewater purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination
Zhou, L., Tan, Y., Wang, J., Xu, W., Yuan, Y., Cai, W., Zhu, S., & Zhu, J. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.75 · Cited by 2,148
Materials for solar-powered water evaporation
Zhao, F., Guo, Y., Zhou, X., Shi, W., & Yu, G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0182-4 · Cited by 1,541
Challenges and Opportunities for Solar Evaporation
Chen, C., Kuang, Y., & Hu, L. (2019) · Joule · doi:10.1016/j.joule.2018.12.023 · Cited by 1,518
Zhang, P., Li, J., Lv, L., Zhao, Y., & Qu, L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01965 · Cited by 1,081
Tailoring Graphene Oxide‐Based Aerogels for Efficient Solar Steam Generation under One Sun
Hu, X., Xu, W., Zhou, L., Tan, Y., Wang, Y., Zhu, S., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201604031 · Cited by 978
Highly Flexible and Efficient Solar Steam Generation Device
Chen, C., Li, Y., Song, J., Yang, Z., Kuang, Y., Hitz, E., Jia, C., Gong, A., Jiang, F., Zhu, J. Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701756 · Cited by 868
Biomass‐Derived Hybrid Hydrogel Evaporators for Cost‐Effective Solar Water Purification
Guo, Y., Lu, H., Zhao, F., Zhou, X., Shi, W., & Yu, G. (2020) · Advanced Materials · doi:10.1002/adma.201907061 · Cited by 791
Enhancement of Interfacial Solar Vapor Generation by Environmental Energy
Li, X., Li, J., Lu, J., Xu, N., Chen, C., Min, X., Zhu, B., Li, H., Zhou, L., Zhu, S., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.004 · Cited by 790
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Hydrogels as an Emerging Material Platform for Solar Water Purification
Zhou, X., Guo, Y., Zhao, F., & Yu, G. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00455 · Cited by 666
Cited by
Fan, Z., Ren, J., Bai, H., He, P., Hao, L., Liu, N., Chen, B., Niu, R., & Gong, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138534 · Cited by 209
Qi, S., Jia, T., Zhang, Y., Zhao, Y., Xing, Y., Zhang, M., Wang, F., Chen, C., & Wong, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202503234 · Cited by 70
Metadata
- Authors
- Yuan, J., Lei, X., Yi, C., Jiang, H., Liu, F., & Cheng, G. J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 430
- Pages
- 132765
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3204549454
- Cited by
- 289
- References
- 39
- FWCI
- 7.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-printed hierarchical porous cellulose/alginate/carbon black hydrogel for high-efficiency solar steam generation. https://app.cochat.ai/papers/10.1016/j.cej.2021.132765
- The paper
- Yuan, J., Lei, X., Yi, C., Jiang, H., Liu, F., & Cheng, G. J. (2022). 3D-printed hierarchical porous cellulose/alginate/carbon black hydrogel for high-efficiency solar steam generation. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2021.132765
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.