The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
3D-printed hierarchical porous cellulose/alginate/carbon black hydrogel for high-efficiency solar steam generation
Abstract
Abstract Solar steam generation (SSG) has great application prospects in seawater desalination and dye wastewater treatment. However, it is still a challenge to realize a low-cost, rapid evaporation, high water quality and sustainable solar-driven water purification system. Three-dimensional (3D) structural design of evaporator is conducive to promoting evaporation efficiency, which has great potential in SSG field. In this study, 3D hierarchical porous hybrid hydrogel evaporators with embedded carbon black (CB) for SSG are built through 3D printing method. The 3D hierarchically porous cellulose/alginate/carbon black hydrogel (CACH) shows a super-hydrophilic wettability, and excellent light absorption (97%) within the wavelength range from 300 to 2500 nm, which can dramatically improve water transportation capacity and photothermal performance in the evaporator. The evaporation rate of the evaporator is as high as 1.33 kg m-2h−1 and the conversion efficiency of solar energy at 1 kW m−2 (one-sun) solar illumination is up to 90.6%. Moreover, the evaporation also exhibits superior salt resistant performance, and collected water meets World Health Organization (WHO) drinking water standards after purification from seawater. In addition, a small amount of photothermal material (1 wt% CB) is required in this system, which is beneficial to reduce the cost of the system. The 3D-printed hierarchically porous hydrogel evaporator has great application prospects in seawater desalination and wastewater purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination
Zhou, L., Tan, Y., Wang, J., Xu, W., Yuan, Y., Cai, W., Zhu, S., & Zhu, J. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.75 · Cited by 2,148
Materials for solar-powered water evaporation
Zhao, F., Guo, Y., Zhou, X., Shi, W., & Yu, G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0182-4 · Cited by 1,541
Challenges and Opportunities for Solar Evaporation
Chen, C., Kuang, Y., & Hu, L. (2019) · Joule · doi:10.1016/j.joule.2018.12.023 · Cited by 1,518
Zhang, P., Li, J., Lv, L., Zhao, Y., & Qu, L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01965 · Cited by 1,081
Tailoring Graphene Oxide‐Based Aerogels for Efficient Solar Steam Generation under One Sun
Hu, X., Xu, W., Zhou, L., Tan, Y., Wang, Y., Zhu, S., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201604031 · Cited by 978
Highly Flexible and Efficient Solar Steam Generation Device
Chen, C., Li, Y., Song, J., Yang, Z., Kuang, Y., Hitz, E., Jia, C., Gong, A., Jiang, F., Zhu, J. Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701756 · Cited by 868
Biomass‐Derived Hybrid Hydrogel Evaporators for Cost‐Effective Solar Water Purification
Guo, Y., Lu, H., Zhao, F., Zhou, X., Shi, W., & Yu, G. (2020) · Advanced Materials · doi:10.1002/adma.201907061 · Cited by 791
Enhancement of Interfacial Solar Vapor Generation by Environmental Energy
Li, X., Li, J., Lu, J., Xu, N., Chen, C., Min, X., Zhu, B., Li, H., Zhou, L., Zhu, S., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.004 · Cited by 790
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Hydrogels as an Emerging Material Platform for Solar Water Purification
Zhou, X., Guo, Y., Zhao, F., & Yu, G. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00455 · Cited by 666
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Lu, Y., Fan, D., Wang, Y., Xu, H., Lu, C., & Yang, X. (2021) · ACS Nano · doi:10.1021/acsnano.1c02578 · Cited by 426
Li, Y., Gao, T., Yang, Z., Chen, C., Kuang, Y., Song, J., Jia, C., Hitz, E. M., Yang, B., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.034 · Cited by 416
Zhang, Y., Xiong, T., Nandakumar, D. K., & Tan, S. C. (2020) · Advanced Science · doi:10.1002/advs.201903478 · Cited by 414
Zhou, J., Gu, Y., Liu, P., Wang, P., Miao, L., Liu, J., Wei, A., Mu, X., Li, J., & Zhu, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903255 · Cited by 396
Wang, Y., Wu, X., Gao, T., Lu, Y., Yang, X., Chen, G. Y., Owens, G., & Xu, H. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105477 · Cited by 393
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
Reversing heat conduction loss: Extracting energy from bulk water to enhance solar steam generation
Wang, Y., Wu, X., Yang, X., Owens, G., & Xu, H. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105269 · Cited by 324
Advances in solar evaporator materials for freshwater generation
Cao, S., Jiang, Q., Wu, X., Ghim, D., Gholami Derami, H., Chou, P.-I., Jun, Y.-S., & Singamaneni, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06034k · Cited by 287
Cellulose Nanomaterials in Interfacial Evaporators for Desalination: A “Natural” Choice
Cao, S., Rathi, P., Wu, X., Ghim, D., Jun, Y., & Singamaneni, S. (2021) · Advanced Materials · doi:10.1002/adma.202000922 · Cited by 275
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
Li, N., Qiao, L., He, J., Wang, S., Yu, L., Murto, P., Li, X., & Xu, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008681 · Cited by 263
Allouss, D., Essamlali, Y., Amadine, O., Chakir, A., & Zahouily, M. (2019) · RSC Advances · doi:10.1039/c9ra06450h · Cited by 231
Li, H., Yan, Z., Li, Y., & Hong, W. (2020) · Water Research · doi:10.1016/j.watres.2020.115770 · Cited by 221
Li, F., Li, N., Wang, S., Qiao, L., Yu, L., Murto, P., & Xu, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104464 · Cited by 213
Liu, C., Hong, K., Sun, X., Natan, A., Luan, P., Yang, Y., & Zhu, H. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta03872e · Cited by 179
Photothermal Membrane Water Treatment for Two Worlds
Jun, Y.-S., Wu, X., Ghim, D., Jiang, Q., Cao, S., & Singamaneni, S. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00012 · Cited by 174
Biomass derived Janus solar evaporator for synergic water evaporation and purification
Lu, Y., Wang, X., Fan, D., Yang, H., Xu, H., Min, H., & Yang, X. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2020.e00180 · Cited by 174
Luo, X., Yuan, J. T., Liu, Y., Liu, C., Zhu, X., Dai, X., Ma, Z., & Wang, F. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00472 · Cited by 150
Self-citationYang, L., Li, N., Guo, C., He, J., Wang, S., Qiao, L., Li, F., Yu, L., Wang, M., & Xu, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128051 · Cited by 136
Liu, S., Huang, C., Huang, Q., Wang, F., & Guo, C. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02913c · Cited by 124
Lu, Y., Fan, D., Xu, H., Min, H., Lu, C., Lin, Z., & Yang, X. (2020) · Solar RRL · doi:10.1002/solr.202000232 · Cited by 114
Rashtchian, M., Hivechi, A., Bahrami, S. H., Milan, P. B., & Simorgh, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115873 · Cited by 112
Cellulose‐Conducting Polymer Aerogels for Efficient Solar Steam Generation
Han, S., Ruoko, T., Gladisch, J., Erlandsson, J., Wågberg, L., Xavier Crispin, A., & Fabiano, S. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000004 · Cited by 110
Yuan, J., Yi, C., Jiang, H., Liu, F., & Cheng, G. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01002 · Cited by 99
Self-citationAccelerated solar steam generation for efficient ions removal
Liu, C., Cai, C., Ma, F., Zhao, X., & Ahmad, H. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.10.055 · Cited by 82
Fabrication of 3D-Printed Ceramic Structures for Portable Solar Desalination Devices
Jonhson, W., Xu, X., Zhang, D., Chua, W. T., Tan, Y. H., Liu, X., Guan, C., Tan, X. H., Li, Y., Herng, T. S., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c04209 · Cited by 76
Fan, H., Gao, A., Zhang, G., Zhao, S., Cui, J., & Yan, Y. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128798 · Cited by 63
Nanomaterial Design for Efficient Solar-Driven Steam Generation
Jin, X., Li, Y., Li, W. H., Zheng, Y., Fan, Z., Han, X., Wang, W., Lin, T., & Zhu, Z. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00934 · Cited by 45
Cited by
Fan, Z., Ren, J., Bai, H., He, P., Hao, L., Liu, N., Chen, B., Niu, R., & Gong, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138534 · Cited by 209
Qi, S., Jia, T., Zhang, Y., Zhao, Y., Xing, Y., Zhang, M., Wang, F., Chen, C., & Wong, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202503234 · Cited by 70
Metadata
- Authors
- Yuan, J., Lei, X., Yi, C., Jiang, H., Liu, F., & Cheng, G. J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 430
- Pages
- 132765
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3204549454
- Cited by
- 289
- References
- 39
- FWCI
- 7.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.