The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates
Open accessAbstract
Steel slag has been used as supplementary cementitious materials or aggregates in concrete. However, the substitution levels of steel slag for Portland cement or natural aggregates were limited due to its low hydraulic property or latent volume instability. In this study, 60% of steel slag powders containing high free-CaO content, 20% of Portland cement and up to 20% of reactive magnesia and lime were mixed to prepare the binding blends. The binding blends were then used to cast concrete, in which up to 100% of natural aggregates (limestone and river sands) were replaced with steel slag aggregates. The concrete was exposed to carbonation curing with a concentration of 99.9% CO 2 and a pressure of 0.10 MPa for different durations (1d, 3d, and 14d). The carbonation front, carbonate products, compressive strength, microstructure, and volume stability of the concrete were investigated. Results show that the compressive strength of the steel slag concrete after CO 2 curing was significantly increased. The compressive strengths of concrete subjected to CO 2 curing for 14d were up to five-fold greater than that of the corresponding concrete under conventional moist curing for 28d. This is attributed to the formation of calcium carbonates, leading to a microstructure densification of the concrete. Replacement of limestone and sand aggregates with steel slag aggregates also increased the compressive strengths of the concrete subjected to CO 2 curing. In addition, the concrete pre-exposed to CO 2 curing produced less expansion than the concrete pre-exposed to moist curing during the subsequent accelerated curing in 60 °C water. This study provides a potential approach to prepare concrete with low-carbon emissions via the accelerated carbonation of steel slag.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Innovation in use and research on cementitious material
Scrivener, K. L., & Kirkpatrick, R. J. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.09.025 · Cited by 828
Properties and hydration of blended cements with steelmaking slag
Kourounis, S., Tsivilis, S., Tsakiridis, P. E., Papadimitriou, G. D., & Tsibouki, Z. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.03.008 · Cited by 454
Mo, L., Zhang, F., & Deng, M. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.05.013 · Cited by 358
Self-citationEnhancing the carbonation of MgO cement porous blocks through improved curing conditions
Unluer, C., & Al-Tabbaa, A. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.02.005 · Cited by 306
Self-citationPan, S.-Y., Adhikari, R., Chen, Y.-H., Li, P., & Chiang, P.-C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.112 · Cited by 296
Cementitious and pozzolanic behavior of electric arc furnace steel slags
Muhmood, L., Vitta, S., & Venkateswaran, D. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.11.002 · Cited by 274
Abu-Eishah, S. I., El-Dieb, A., & Bedir, M. S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.012 · Cited by 247
Utilization of fine recycled aggregates in concrete with fly ash and steel slag
Anastasiou, E., Georgiadis Filikas, K., & Stefanidou, M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.037 · Cited by 247
High-strength KOBM steel slag binder activated by carbonation
Ghouleh, Z., Guthrie, R. I. L., & Shao, Y. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.09.028 · Cited by 236
Performance of steel slag and steel sludge in concrete
Roslan, N. H., Ismail, M., Abdul-Majid, Z., Ghoreishiamiri, S., & Muhammad, B. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.008 · Cited by 203
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Song, Q., Guo, M.-Z., Wang, L., & Ling, T.-C. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105740 · Cited by 447
Comprehensive utilization of steel slag: A review
Gao, W., Zhou, W., Lyu, X., Liu, X., Su, H., Li, C., & Wang, H. (2023) · Powder Technology · doi:10.1016/j.powtec.2023.118449 · Cited by 443
Carbonation of steel slag and gypsum for building materials and associated reaction mechanisms
Wang, X., Ni, W., Li, J., Zhang, S., Hitch, M., & Pascual, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105893 · Cited by 304
An overview of utilizing CO2 for accelerated carbonation treatment in the concrete industry
Li, L., & Wu, M. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102000 · Cited by 305
CO2 activated steel slag-based materials: A review
Humbert, P. S., & Castro-Gomes, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.058 · Cited by 276
Martins, A. C. P., Franco de Carvalho, J. M., Costa, L. C. B., Andrade, H. D., de Melo, T. V., Ribeiro, J. C. L., Pedroti, L. G., & Peixoto, R. A. F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123265 · Cited by 258
Mechanism for rapid hardening of cement pastes under coupled CO2-water curing regime
Zhan, B. J., Xuan, D. X., Poon, C. S., & Shi, C. J. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.021 · Cited by 254
Carbon sequestration of steel slag and carbonation for activating RO phase
Chen, Z., Li, R., Zheng, X., & Liu, J. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106271 · Cited by 212
Mo, L., Yang, S., Huang, B., Xu, L., Feng, S., & Deng, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103715 · Cited by 208
Self-citationEnvironmental benefit assessment of steel slag utilization and carbonation: A systematic review
Li, L., Ling, T.-C., & Pan, S.-Y. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.150280 · Cited by 193
Basic oxygen furnace slag: Review of current and potential uses
Naidu, T. S., Sheridan, C. M., & van Dyk, L. D. (2020) · Minerals Engineering · doi:10.1016/j.mineng.2020.106234 · Cited by 166
Preparation and properties of carbonated steel slag used in cement cementitious materials
Chen, Z., Li, R., & Liu, J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122667 · Cited by 133
Metadata
- Authors
- Mo, L., Zhang, F., Deng, M., Jin, F., Al-Tabbaa, A., & Wang, A.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2017-10
- Volume
- 83
- Pages
- 138-145
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2737786421
- Cited by
- 352
- References
- 20
- FWCI
- 19.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by/4.0/ (vor)
- Funders
- open foundation of Anhui province key laboratory of advanced building materials of Anhui Jianzhu University (JZCL201601KF)
- National Natural Science Foundation of China (51461135003, 51502134, 51308004)
- EPSRC UK (EP/M003159/1)
- Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.