The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature
Abstract
This study investigated synergetic effects of hybrid polypropylene (PP) and steel fibers on explosive spalling prevention of ultra-high performance concrete (UHPC) at elevated temperature. Permeability of UHPC was measured and correlated to the extent of spalling quantitatively. Microstructures of UHPC before and after elevated temperature exposure were examined to reveal potential mechanisms responsible for changes in permeability. Results showed that the use of hybrid PP and steel fibers completely prevented explosive spalling even at low fiber dosage of both fibers due to significant increase of permeability. Microstructural analysis revealed that such synergistic effect on increased permeability of hybrid PP and steel fiber-reinforced UHPC was attributed to enhanced connectivity of empty PP fiber tunnels by multiple microcracks generated from the thermal expansion of both fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steady‐State and Multiple Cracking of Short Random Fiber Composites
Li, V. C., & Leung, C. K. Y. (1992) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1992)118:11(2246 · Cited by 1,441
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Effect of fire on concrete and concrete structures
Khoury, G. A. (2000) · Progress in Structural Engineering and Materials · doi:10.1002/pse.51 · Cited by 802
High-temperature behaviour of HPC with polypropylene fibres
Kalifa, P., Chéné, G., & Gallé, C. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00596-8 · Cited by 752
Spalling and pore pressure in HPC at high temperatures
Kalifa, P., Menneteau, F.-D., & Quenard, D. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00384-7 · Cited by 700
Wille, K., Naaman, A. E., El-Tawil, S., & Parra-Montesinos, G. J. (2012) · Materials and Structures · doi:10.1617/s11527-011-9767-0 · Cited by 428
Preparation of Ultra-High Performance Concrete with common technology and materials
Wang, C., Yang, C., Liu, F., Wan, C., & Pu, X. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.11.005 · Cited by 391
Chen, B., & Liu, J. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.010 · Cited by 375
Sun, W., Chen, H., Luo, X., & Qian, H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00479-8 · Cited by 323
Critical factors governing the fire performance of high strength concrete systems
Kodur, V. K. R., & Phan, L. (2007) · Fire Safety Journal · doi:10.1016/j.firesaf.2006.10.006 · Cited by 311
How do polypropylene fibers improve the spalling behavior of in-situ concrete?
Zeiml, M., Leithner, D., Lackner, R., & Mang, H. A. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.12.018 · Cited by 271
Wang, X. H., Jacobsen, S., He, J., Zhang, Z. L., Lee, S. F., & Lein, H. L. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.05.002 · Cited by 267
Yermak, N., Pliya, P., Beaucour, A.-L., Simon, A., & Noumowé, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.120 · Cited by 266
Liu, X., Ye, G., De Schutter, G., Yuan, Y., & Taerwe, L. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.010 · Cited by 214
Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures
Bangi, M. R., & Horiguchi, T. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.07.001 · Cited by 193
Effects of various fibres on high-temperature spalling in high-performance concrete
Ozawa, M., & Morimoto, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.068 · Cited by 177
Fibers, Percolation, and Spalling of High-Performance Concrete
Bentz, D. P. (2000) · ACI Materials Journal · doi:10.14359/9878 · Cited by 145
Debicki, G., Haniche, R., & Delhomme, F. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.04.002 · Cited by 99
Explosive spalling of concrete in fire
Klingsch, E. (2014) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010139622 · Cited by 69
Cited by
Durability of ultra-high performance concrete – A review
Li, J., Wu, Z., Shi, C., Yuan, Q., & Zhang, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119296 · Cited by 680
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
A review of mechanical properties of fibre reinforced concrete at elevated temperatures
Wu, H., Lin, X., & Zhou, A. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106117 · Cited by 328
Malik, M., Bhattacharyya, S. K., & Barai, S. V. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121398 · Cited by 259
Metadata
- Authors
- Li, Y., Tan, K. H., & Yang, E.-H.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 96
- Pages
- 174-181
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2901230481
- Cited by
- 281
- References
- 20
- FWCI
- 13.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.