The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effect of drying procedures on pore structure and phase evolution of alkali-activated cements
Abstract
Abstract This study reports the effects of different drying procedures on the pore determination and phase evolution of alkali-activated cements based on metakaolin (AAMK), fly ash (AAFA) and slag (AAS), as characterized by N2 adsorption and XRD and FTIR analysis, in comparison with ordinary Portland cement (OPC) paste. The selected drying methods are: (1) 65 °C/24 h vacuum drying, (2) 105 °C/24 h oven drying, (3) solvent-exchange with ethanol for 3 days then 50 °C/24 h oven drying, and (4) freeze-drying with liquid nitrogen. The pore structures of AAMK and AAFA, with zeolite-like sodium aluminosilicate gel phases and little bound water, are less sensitive to drying conditions than are AAS and OPC, which consist of calcium (alumino)silicate hydrates. The drying procedures have less impact on the phase compositions of alkali-activated cements than OPC in general. Nonetheless, caution must be applied in selection of appropriate drying procedures to obtain reproducible and meaningful information regarding the pore and phase structure of alkali-activated cements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Self-citationRickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Carbonation kinetics of a bed of recycled concrete aggregates: A laboratory study on model materials
Thiery, M., Dangla, P., Belin, P., Habert, G., & Roussel, N. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.01.005 · Cited by 207
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationLiu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Cao, R., Zhang, S., Banthia, N., Zhang, Y., & Zhang, Z. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107840 · Cited by 254
Self-citationRecent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citation
Metadata
- Authors
- Zhang, Z., Zhu, Y., Zhu, H., Zhang, Y., Provis, J. L., & Wang, H.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 96
- Pages
- 194-203
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2902505827
- Cited by
- 167
- References
- 3
- FWCI
- 10.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.