The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Development of ultra-high performance geopolymer concrete (UHPGC): Influence of steel fiber on mechanical properties
Abstract
Abstract This study reports the development of ultra-high performance geopolymer concrete (UHPGC) and overcoming the brittleness feature of geopolymer matrix by using different steel fibers. Four straight steel fibers with different aspect ratios and two different deformed steel fibers were investigated. Flowability, compressive strength and flexural behavior including strengths and deflection, and energy absorption capacity of UHPGC, were systematically evaluated. A deformation ratio of steel fiber was introduced to quantitatively correlate the steel fiber shape and the mechanical performance. The flowability of fresh UHPGC mixtures decreased when the fiber content and length increased, as expected, and was inconspicuously influenced by fiber shape. The increase in fiber content and the decrease of fiber diameter contributed to the improvement of the mechanical strengths of UHPGC. The flexural behaviors of UHPGC improved as the fiber volume and length increased, while the compressive and first crack strengths were affected by both curing conditions and fiber dosages as well. Different from Portland cement-based composites, the corrugated fibers with a higher deformation ratio added in UHPGC, had an inferior strengthening and toughening efficiency, while for straight fibers, those longer and smaller in diameter were more preferred. Finally, based on the previous research, a new one with adjustment and simplification was proposed for that of newly-developed UHPGC, and the fitted results had higher correlation coefficients (r2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationMix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationEffects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationRecent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationYu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Wu, Z., Shi, C., He, W., & Wang, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.010 · Cited by 492
Self-citationYoo, D.-Y., Lee, J.-H., & Yoon, Y.-S. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.07.033 · Cited by 482
Cited by
Alsalman, A., Assi, L. N., Kareem, R. S., Carter, K., & Ziehl, P. (2021) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2021.100047 · Cited by 344
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citationLao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Metadata
- Authors
- Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 112
- Pages
- 103670
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3031082382
- Cited by
- 286
- References
- 37
- FWCI
- 20.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of ultra-high performance geopolymer concrete (UHPGC): Influence of steel fiber on mechanical properties. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2020.103670
- The paper
- Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020). Development of ultra-high performance geopolymer concrete (UHPGC): Influence of steel fiber on mechanical properties. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2020.103670
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.