The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes
Abstract
Abstract Reactions between the fly ash/slag composite mix and the Na2CO3/Na2SiO3 activator were monitored through Isothermal conduction calorimetry. The resulting products were analyzed with the help of XRF, XRD and FT-IR techniques. In calorimetric response, the composite pastes had more total heat release than the fly ash paste requiring ∼50% less activation energy to yield reaction products. These products were largely amorphous as observed in the XRD patterns. Rheological studies indicated that composite pastes were very stiff above 25 wt% slag addition as its yield stress was almost doubled to fly ash paste. The compressive strength of hardened pastes increased with increasing slag content and activator dosage and decreased with increasing water-binder ratio. The deposition of reaction products onto the fly ash/slag particle surfaces and also the dense microstructures as observed in FESEM supported higher strength of geopolymer pastes at higher activator and slag contents. The developed paste with standard sand at 1:2 ratio produced mortar with a compressive strength of ∼72 MPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Durability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
Cited by
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Lao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Ganesan, Y., & Panruti Thangaraj, R. (2026) · Periodica Polytechnica Civil Engineering · doi:10.3311/ppci.41876 · Cited by 2
“These results are in accordance with previous research that has emphasized the significance of preserving an optimal balance between the carbonate and silicate components in the activator system to accomplish satisfactory rheological behavior in geopolymer concrete [30].”
Metadata
- Authors
- G, I., Singh, B., Deshwal, S., & Bhattacharyya, S. K.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 97
- Pages
- 226-238
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2905265476
- Cited by
- 225
- References
- 3
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2018.12.007
- The paper
- G, I., Singh, B., Deshwal, S., & Bhattacharyya, S. K. (2019). Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2018.12.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.