The DOI matches its Crossref record.
Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa
Abstract
A systematic study of the tensile properties of all-grade strain hardening cementitious composite (SHCC) from normal strength to high strength was conducted in the present research. The compressive strengths of the cylinder specimens ranged from 43 MPa to 115 MPa. Different combinations of fiber volume fractions and fiber aspect ratios (fiber length/diameter) were employed to investigate the effects of the fiber reinforcement index (the product of fiber volume fraction and fiber aspect ratio) on the tensile properties of SHCC, including mechanical properties and crack patterns. The relationships between the fiber reinforcement index and tensile properties were established at all compressive strengths and compared with the previous experimental values. Moreover, a performance-based design concept was proposed for designing SHCC based on the required mechanical and crack pattern properties, corresponding to the ultimate limit state and serviceability limit state, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
Self-citationZhang, Z., Yang, F., Liu, J.-C., & Wang, S. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106200 · Cited by 305
Yu, K.-Q., Zhu, W.-J., Ding, Y., Lu, Z.-D., Yu, J.-T., & Xiao, J.-Z. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105813 · Cited by 295
Self-citationYe, J., Cui, C., Yu, J., Yu, K., & Dong, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122586 · Cited by 262
Self-citation
Metadata
- Authors
- Li, L., Cai, Z., Yu, K., Zhang, Y. X., & Ding, Y.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 97
- Pages
- 202-217
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2909010350
- Cited by
- 187
- References
- 0
- FWCI
- 14.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.